Related
I'm using this wonderfull app vip_fresh_install found here http://forum.xda-developers.com/showthread.php?t=351465 and everything runs smoothly.
But I'd like to specify another thing into the script.
Since I need this script to install, after the release of a new rom, the same apps, I already know the destination (sd or pda) of every single cab.
So, I'd like to have a silent install script that it knows where the app must be installed and, so, that is not asking anything.
I've tried to find something into the forum or into the manual, but I'm a tooooooooooooootally newbie in programmin/scripting.
I've tried to "modify" this part of the script, that seems to me the part I need, but dunno how...
Code:
Scriptname="Vip_FreshInstall.mscr"
backScript = SystemPath( "ScriptPath" )
scriptname = SystemPath("ScriptName")
softresetneeded = 0
message(backScript)
ForEach file in files (backScript \ "cab\*.cab")
ansinst = Question ("Installing " & file, "Install", "YesNo")
If (ansinst = 1)
RunWait (file)
EndIf
EndForEach
Can someone help me to have a silent and "pre setted destination" cab installation method?
THANKS IN ADVANCEEEEEEEEEEEEEEEEEEEEEEE!!!
ps: sorry for my terrible English
try this to avoid yesno question
leopardone said:
I'm using this wonderfull app vip_fresh_install found here http://forum.xda-developers.com/showthread.php?t=351465 and everything runs smoothly.
But I'd like to specify another thing into the script.
Since I need this script to install, after the release of a new rom, the same apps, I already know the destination (sd or pda) of every single cab.
So, I'd like to have a silent install script that it knows where the app must be installed and, so, that is not asking anything.
I've tried to find something into the forum or into the manual, but I'm a tooooooooooooootally newbie in programmin/scripting.
I've tried to "modify" this part of the script, that seems to me the part I need, but dunno how...
Code:
Scriptname="Vip_FreshInstall.mscr"
backScript = SystemPath( "ScriptPath" )
scriptname = SystemPath("ScriptName")
softresetneeded = 0
message(backScript)
ForEach file in files (backScript \ "cab\*.cab")
ansinst = Question ("Installing " & file, "Install", "YesNo")
If (ansinst = 1)
RunWait (file)
EndIf
EndForEach
Can someone help me to have a silent and "pre setted destination" cab installation method?
THANKS IN ADVANCEEEEEEEEEEEEEEEEEEEEEEE!!!
ps: sorry for my terrible English
Click to expand...
Click to collapse
Scriptname="Vip_FreshInstall.mscr"
backScript = SystemPath( "ScriptPath" )
scriptname = SystemPath("ScriptName")
ForEach file in files (backScript \ "cab\*.cab")
RunWait (file)
EndForEach
new version
Please see attahced new version. It will install slient cab's as well registry's
v3patel said:
Please see attahced new version. It will install slient cab's as well registry's
Click to expand...
Click to collapse
That's pretty cool man!!
v3patel said:
Please see attahced new version. It will install slient cab's as well registry's
Click to expand...
Click to collapse
what a wonderfullllllllllllllllllllllllllllll new!!!
thx a lot m8!!!
let me check!
ps: just a question... but... oki for the silent install , but where?
Some support !!!
v3patel said:
Please see attahced new version. It will install slient cab's as well registry's
Click to expand...
Click to collapse
Congratulations for this app. Its working perfect in my HTC Diamond.
Can you give me any hints on how to auto enter the user name and password after each cab installation ?
Can I implement silent procedure in installing cabs in the sd card (or internal storage in my Diamond)? What I mean is that from what I have tried when you copy the *.cab file in the cabs folder then they are auto installed in the main memory. How can we do the same thing with the sd card?
Thanks a lot in advance!
v3patel said:
Please see attahced new version. It will install slient cab's as well registry's
Click to expand...
Click to collapse
Just what i was looking for Thanks man!!
v3patel said:
Please see attahced new version. It will install slient cab's as well registry's
Click to expand...
Click to collapse
Great work THANKS!
HTC HD on the installation of the cab part well, but for every cab asks me if I want to install the cab and where I want I want to install. Is there a way to automate this?
the ROM version is 1.56.408.0 (43972) ITA Date 03/10/2009
excuse my English, I used the google translator
Italiano
Grande lavoro GRAZIE!
Su HTC HD l'installazione dei cab parte bene, però per ogni cab mi chiede se voglio installare il cab e dove lo voglio voglio installare. C'è un modo per automatizzare
anche questo?
how can i use to deploy 3 cabs and 1 registry silently on a pocket pc?
1) Putting cabs in "MYCAB"
2) Putting myreg in "MYREGISTRY
3) file for the root in "ROOT"
ok..
Then i have to copy these file on a sd? with exe in root position?
That's all?!
Thanks a lot people...really
ippoglosso said:
Great work THANKS!
HTC HD on the installation of the cab part well, but for every cab asks me if I want to install the cab and where I want I want to install. Is there a way to automate this?
the ROM version is 1.56.408.0 (43972) ITA Date 03/10/2009
excuse my English, I used the google translator
Italiano
Grande lavoro GRAZIE!
Su HTC HD l'installazione dei cab parte bene, però per ogni cab mi chiede se voglio installare il cab e dove lo voglio voglio installare. C'è un modo per automatizzare
anche questo?
Click to expand...
Click to collapse
Wincecab editor has a function in the cabnet tab under options, to not allow a user to select the destantion folder in short most if not all cabs are set to install to the onboard memory but if you change the settings as i stated above you can cut that part out and have the cab automatically install into the phone memory.
Hi,
Qui peut me dire comment configurer dans la compilation de la rom Wm6.1 te tsk de bureau?
*********
Who can say me how to configure in the compilation of the rom Wm6.1 you office tsk?
*********
J'ai essayer de mettre un autre tsk dans OperatorPKG et modifier le 'config_operator.txt'
Mais cela ne fonctionne pas! les barres et le menu démmarer sont du tsk, mais pas le fond.
Qui reste vert!
*********
I have to try to put another tsk in OperatorPKG and modify the 'config_operator. txt' But that does not work! the bars and the menu démmarer are tsk, but not the office. Who remains green!
**********
Que faut'il modifier pour que le TSK vienne par défaut au complet ?
***********
What is necessary it to modify for that the TSK comes by default completely?
Thanks in advance for your help..
NB; désolé pour mon Anglais!!
i am also looking how i can do that. Can someone please help us ?
estract tsk file and create theme oem pack whit rgu file with regedit values.
Insert this dir into SYS dir
Merci,
Je vais tester de cette façon.
extraire ok il me donne les gif et Theme.inf
Mais comment créer le pack avec quels options dans package Creator ? pour qu'il se mette en thème!
Thank you,
I will test of this manner.
With packages creator 5.5.exe? Extract ok it gives me the gif and Theme.inf
But how to create the pack with which options in package Creator? for that it puts himself in theme!
NB: in rgu just 'REGEDIT4' is good or not ?
Thanks in advance for détails..
this is my bluetheme build for my self
overvrite your file in to bluetheme dir and edit rgu file with registry keys from your theme,put this dir in to SYS dir
Enjoy
Thanks,
in the pack extracts cab I have just 'REGEDIT4' no register key!
An have 'Theme.inf' and 'option.xml' and 4 gif !
Therefore I do not know to integrate it in your bluethème :-(
But Thanks for your help...
Re...
Ok my problems it solved ;-)
In tsk no 'jpg' but 'gif' and it is Ok..
Mmm it isn't working here. I have a file called vista21.tsk with 2 gif's in it. If i make a package of it and dump it in the sys folder only the menubar has the theme style. Anyone can help me ?
lexi1986 said:
Mmm it isn't working here. I have a file called vista21.tsk with 2 gif's in it. If i make a package of it and dump it in the sys folder only the menubar has the theme style. Anyone can help me ?
Click to expand...
Click to collapse
With ThemeGenCE to verify that the pictures his good to the format GIF and non-jpg (which is surement the case for VISTA21.TSK !) If this is well in 'gif' to modify in OperatorPKG the file 'config-operato. txt' to put your tsk and eliminate the tsk htc and place the your.
In package that did not work at my place not more.
NB: With ThemeGenCe has the selection it affifhe the format of the pictures, before to import it. I repatriated several VISTA Tsk they his all in jpg, therefore incompatible, therefore, it is necessary to modify them in 'GIF'
Désolé pour mon Anglais ;-)
Tsk file contains:
one o more Image files (jpg,png,gif) for background
and more registry keys for display elements color (menubar,text.....)
infido said:
Tsk file contains:
one o more Image files (jpg,png,gif) for background
and more registry keys for display elements color (menubar,text.....)
Click to expand...
Click to collapse
that's correct but with every theme i have only got the menu bar good and the background is the ugly windows mobile 6.1.tsk green the registry key's are good. Are there registry keys from the wm6.1 tsk inside or something ?
lexi1986 said:
that's correct but with every theme i have only got the menu bar good and the background is the ugly windows mobile 6.1.tsk green the registry key's are good. Are there registry keys from the wm6.1 tsk inside or something ?
Click to expand...
Click to collapse
RE..Hi,
I had the same problem, but the theme by default is located in operatorPKG, and it is constructed with pictures 'gif' and non-jpg or png. I converted the VISTA10.tsk with pictures Gif and it works well. Thank you to infido, but in package, I did not there arrive.
ThemeGenCE
infido said:
this is my bluetheme build for my self
overvrite your file in to bluetheme dir and edit rgu file with registry keys from your theme,put this dir in to SYS dir
Enjoy
Click to expand...
Click to collapse
1) I have seen your "bluetheme" built with my program http://www.codeppc.com/telechargements/themegence/themegence.htm
May I give you an advice. I see that your Start and Today Images for both portrait and Landscape are the same.
You can lighten your TSK (half weight) by setting in ThemeGenCE the UseStartImage registry variable (check the checkbox in Options).
Define Start Image in Portrait and landscape after this and save the theme.
2) I have seen in this thread problems with images format. TSK allows 4 types of images : bmp, gif, jpg and png.
For simplification in my program ThemeGenCE I always rename extension to ".gif" (without changing the format) independantly of the real format.
Windows Mobile (and Desktop Windows, as XP and Vista) does not care about the extension of the images. He recognized the good image format.
All these informations are in the help file which comes with ThemeGenCE (ThemeGenCEEn.chm).
I hope it will help you
Thanks for your ThemeGenCE tut, good soft.
Et en FR en plus
Alan-B said:
Thanks for your ThemeGenCE tut, good soft.
Et en FR en plus
Click to expand...
Click to collapse
Version wallonne seulement... (Liégeois d'origine par mes parents)
Here I leave with you for being my birthday my private Rom, which I use. This rom is the fastest I've tested so far
I have removed:
-- Cube
-- HTC Home
-- Welcome
-- Pictures and photos unserviceable
-- QuickGPS
I added:
-- Today LG
-- PHM Registry
-- Modaco no data
-- PDC clock
-- Clean up temporary
-- Pocket screamshot
-- Pimbackup
--...
Pd: leaves about 69mb of Ram free jejeje note that it is clean, ----------------69mb free programs--------131.22mbof storage
Obligatory Hardreset BEFORE FLASH.
Bug: knowledge of LG TODAY:
-- Does not work or direct access "games"
-- Bluetooth does not work the other by what is going fine
if you like my work can help me DONATE
LINK TO DOWNLOAD http://www.todopdas.es/showthread.php?p=98604&posted=1#post98604
Video in that you can see the rom HERE http://www.youtube.com/watch?v=12W5hloZM1s
sorry for my bad english if a word is "bad" sorry me, i use google traslate
reserved to answer quetions
GooDDay, Hola etc,
Did you know that the amount of Female Users has been growing?
Good Luck on Your Clean Rom.
Sorry for my lenguage but the google traslate failed. in next post i use other trasnlater and a dictionary
Put images of the podium today LG please.
Cheers
Sorry, had not seen the video link
Cheers
lol, if you want i can send you a lg.cab in spanish but this lgtoday in spanish haven't all bottons that lgtoday in english
Please post a miror to download this rom... thx
Por favor, un enlace para descargar la rom que no sea un foro que se tiene que registrar como usuario... muchas gracias de barcelona..
To: Jose Antonio
what do you think of this rom? Have you tried it. i'm also from Spain, and I'm actually using Khanx to me is the best so far for us. What do you think.
I'm asking you because you see quite an expert¡¡
Thanks, gracias,
planagan said:
what do you think of this rom? Have you tried it. i'm also from Spain, and I'm actually using Khanx to me is the best so far for us. What do you think.
I'm asking you because you see quite an expert¡¡
Thanks, gracias,
Click to expand...
Click to collapse
hi planagan you can use this rom is very very fast and this rom is clean but it has a lot of program, an example: phm registry, modaco nodata, gfinder, contactpm, cleam up temporaly, pocket scream shot... this rom has disable touch flo and thanks that it come to 69 mb ram and 131 of storage
try this rom
This is a full WM6.5 rom with a bunch of HTC enhancements. Mostly are from Mega packages, the others are kept up to date periodically (fot those that work still with this old hardware). Interfaces that can be found in it are Titanium and m2d2, up to user's choice. The difference with other roms is that it uses a hacked WM6.5 kernel from another device, thanks DFT group. This permits to run MSbuilds without any recmod, and same for the HTC packages, thus keeping good speed and optimal stability, without any trade-off. The HomePainted value average is about 34 seconds, which is rather excellent for a "full" rom
Preview :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- 2DManila_2_0_20163224_00 based main interface, fast flip_flop clock, Titanium also available as an alternative (built-in), Lockscreen from hTC_Mega, Mega_dialer, finger-friendly UI
- Proprietary monoKrom2 theme ( mostly black & green )
- 101,8 Mo RAM available, WM6.5 native kernel, no recmod has been done
- IE is not laggy ( no recmod of modules + smart_rOm cache values )
- Lots of tweaks and bug-fixes included in this release, that was hard work
- Quite good speed, stable rom
- Post-Install optimized for the SFR network. If you have different carrier, just remove "TV-musiqueSFR_FRA_WWE.cab" and "U_SUPL_AGPS_update.reg" from XDA_UC folder before flashing, all other elements good to keep.
Here are a few hints I give you, in order to have proper rom function and less bugs possible. Hopefully
----------------------------------------------------------------------------------------
- 1st of all, follow those 5 simple steps:
1°) Before flashing you should always have Hard_SPL installed.
Refer to the XDA Polaris general section to download and install it correctly, in case you don't have it installed.
Otherwise, flashing of the rom is likely to be unsuccessful.
2°) Unzip XDA_UC folder and all of its content to the root of your SD before the flash for the best experience.
It will install :
- Connection_Setup (automatically defines your internet & mms settings at 2nd boot, must-have; updated gfx version)
- Google Maps v.4.1.1(#1), (needed for m2d2 referring page to work)
- GPsMod_Driver (useful utility to get better, more sensitive GPS module, lag correction; follow on-screen instructions to configure your GPS software for new ports
- HTC_Calculator ( opens quick, supports sci display in landscape, will also be suppressed the defaut WM calculator .lnk, youpee)
- Kevtris_2 (cool additional game, optional)
- YouTube 2.4.4 "official" (needed for m2d2 referring .lnk in internet tab to work)
- some needed .reg "after_boot" tweaks
3°) Please, do a favour and do flash last 3.13 or 3.19 official Polaris hTC rom before that one.
It is 100% required to avoid strange bugs and vital for proper rom function.
4°) Once you successfully flashed the official rom, verify you have the required radio; I recommend Radio_Polaris_1.59.46.12 or even Radio_Polaris_1.65.38.14.
How I proceed: I let the offical hTC rom boot to align screen, then pass device into bootloader mode and then flash radio.
Hint: If you have already 1.65.38.14, downgrade radio first to 1.59.xx.xx or it won't let you flash original HTC rom
5°) Once radio is flashed, your hTC will reboot. Wait for align screen again, then flash my rom.
Afterwards, it's OK, you'll be 100% hassle free for sure
-----------------------------------------------------------------------------------------
The customization of the rom is automatic and only require you follow the basic procedure :
- 1st boot will lead you to calibration screen. It can be long and you can loose some of the backlight, so don't loose your temper you'll eventually get to Calibration Screen
Calibrate, eventually set the date and time ( ActiveSync of WDMC will do it automatically afterwards eitherways ). Then, soon afterwards you'll see a XDA_UC message, follow on-screen instructions till the device asks for a reset. Don't use device during install of XDA_UC, device will be very slow and buggy. When the device asks for a reset, press "Yes".
- 2nd boot will lead you to Connection_Setup. it will sort out your internet connection, mms server profile and so on automatically. Just choose your provider in the list and let it go.
- Once those 2 steps are done, no reboot required, you can finally activate your preferred GUI : Sense or Titanium.
Hint: Connection_Setup can be uninstalled afterwards if you wish. If you want to remove the huge provision database also ( 2MB free more), you can run the"conncleanup" mortscript provided as bonus. Put it
conveniently at root of SD and run it, but not in XDA_UC folder please
Once done, basic default rom install will give you about 106 MO free storage space onboard.
Hint: Free RAM : 48 Mo average with m2d2 running all times, no extra soft running. It will boot m2d2 with 58,35 Mo RAM free ( once m2d2 and taskmanager just loaded ).
Hint: if you wish to free up some RAM, after using close Audio_Manager with the X at right top of its own screen, or it will likely stay in background and consume RAM for nothing ...
Hint: Alarms will wake up correctly after ActiveSync/ WDMC synchro. Don't forget to check that in Clocks & Alarms, hitting the little "bell" symbol; "Play a sound" and "Repeat the sound" are ticked, I suggest using "Alarm5" but it's really up to your taste ...
Hint: to setup Gmail account, use "Outlook" type in the droplist. when it asks for username, add your "@gmail.com" at the end, leave domain blank, server is "m.google.com"
Hint: while finished setting of an email account, use Start / Connectivité, open ActiveSync screen to get proper 1st connection. Will not be required afterwards. Sometimes it is required you run a 2nd sync manually to get your all contacts back (e.g. gmail based)
-----------------------------------------------------------------------------------------
What's inside: interesting stuff maybe:
Code:
2DManila_2_0_20163224_00
AdobePDF_2_5_1_0_378273_04H
AdvancedNetwork_1_0_12_1
aGPS_Confirmation_1_0_19183131_04
Album_3_0_20163130_0
App_Service_1_87_0_0
Audio_Booster_2_5_19182330_1
Audio_Manager_2_2_20121525_LR1
AutoShortcut_1_1_2_0
BluetoothSetting_2_11_0_0
BTBPP_1_7_18_R1
BTFtp_1_2_33309_91
BTSAP_3_2_0_R5
Camera_5_04_31875_00
ChangeUSBMode_1_10_0_1
ClearStorage_2_3_2_1
CMBandSwitching_2_0_0_2
CMBluetooth_0_9_0_0
CMCallBarring_1_3_1_0
CMCallerID_1_4_0_0
CMCallForwarding_1_4_4_0
CMCallWaiting_1_2_0_0
CMInternetSharing_1_1_6_0
CMPhoneVMSetting_1_3_0_0
CMPhone_1_6_4_1
CMPin_1_3_2_0
CMWifiEnroll
CMWifiInformation
CMWifiIP
CommManager_2_9_F_3
Concurrence_Mgr_1_5_19191120_00
Contact_Picker_1_0_20113132
Contact_Utility_Engine_1_0_20141226_0000
CyberonVoiceSpeedDial_1_2_b080731_R4
DataDisconnect_1_14_0_2
DelWMPTempFolder_1_10_0_0
DeviceInfo_2_7_0_1
DRM_Middleware_1_5_19142824_00
DShow_2_00_081029_0
Email_Setup_Wizard_2_1_19201119_00
FileUpload_1_1_0_0
FlashLiteShareDLL_1_0_19193325_0
FMRadio_1_6_18164032_2
Full_Screen_Player_1_7_19183031_01
GoogleLocationService_1_0_1_21
HTCAnimation_1_3_5_0
HTCApplication_1_14_1_0
HTCFDN_1_6_1_0
HTCFont_Link_1_0_19132133_1
HTCFramework_1_5_1922_3320_00
HTCGeoService_1_0_19191120_00
HTCGesture_1_0_30346_0
HTCMessage_1_09_281_2
HTCScroll_2_0_20132227_00
HTCSettings_1_4_4_0
HTCStartUp_1_7_0_0
HTCUtil_4_8_0_0-bugfixed
HTC_Modem_Link
IE6Enhancement_1_0_19192925_00
IME_Engine_Western_2_1_19191429_00
IME_EzInput_Western_2_1_19183030_00
IME_Tutorial_1_0_20141125_00
InvokeSIMMgr_1_12_0_0
LockScreenAppLauncher_1_0_1919_1827
LockstreamDRM_1_2_081216_OnlyIE_01
LongPressEndKey_1_2_35861_4
Media_Tool_kit_1_0_20163130_00
MEGA_2DManila_Default_Skin_nAr
MEGA_LockScreenAppLauncher_Default_Skin
MEGA_Messaging_Client_Arcsoft_QVGA
Menu_Enhancement_1_1_20143325_00
Message_Enhancement_1_2_19192031_01
Messaging_Client_Arcsoft_5_2_2_66
mHubVO_1_60_080801_X0
mHub_6_55_080221_E0
MicrophoneAGC_0_92_0_0
Mute_1_1_2_0
MyCPL_3_13_0_6
NewMailAccount_1_11_0_1
Notification_Enhancement_3_0_1919_1930
PhoneSetting_1_73_0_0
Phone_Canvas_Enhancement_2G_4_0_52619223128_0
Picture_Enhancement_1_50_19171326_00
PKG_1_1_0_0
PowerOffWarning_2_10_0_0
Power_2_28_0_2
QuickGPS_1_00_220821_00
Random_Access_4_1_19173928_1
Redial_1_3_0_0
Resource_Proxy_1_0_19171732_02
Ringtone_Plugin_1_0_080624_4
Settings_Improvement_1_0_20111623_0
SharedResource_1_0_20111720
Shared_Modules_1_01_19143331_01
SignatureReplace_1_5_0_0
SimLock_4_28_0_0
SIM_Mgr_6_79_0_0
SMSInboxThreading_1_36_0_0
STK_Service_4_97_0_0
STK_UIPPC_4_76_0_0
StorageLow_1_0_0_2
Streaming_Media_3_1_19183421_01
Streaming_SDK_2_7_20141626_00
TaskBarIconMgr_2_13_0_0
Task_Manager_2_1_19183631_34
TouchOptions_1_0_19171631_00
USB_To_PC_Pop_Up_2_3_19183029_00
USSDService_4_38_0_0
VersionInfo_1_0_118710_0
VoiceRecorder_1_10_18192131_6
Volume_Control_2_2_19182932_10
Wi-FiWizard_1_19_0_1
WifiAdvanced_1_0_4_1
WiFiSettings_1_2_5_1
zlibce_m_1_2_3_1
Advanced_Configuration_Tool_v3_3
APP_Softreset
Calibrationscreen
Device_Lock
eLiAs_ASyncKiller
eLiAs_IrBthDet
ervius_Sip_Selector_v3
JbedJava_0_0_20090217_51R2
Lockscreen_font_mod
monoKrom2
Rotate_Screen_Utility
SaveToSim
soundscheme
StartMenu_Icon
Start_Menu_4_columns_landscape
System_Tweaks
Total_Commander_2.52_beta2
WelcomeHead
xdaShutdown_1_01-QVGA+nAr skin
This ROM is dedicated to my friend Icke, we spent a lot of time cooking for Trinity, lol, those were good days, now this is what I wished.
Thank you Icke for all the good time, cooking and support
Thanks to all cooks here that provided support or nice apps, Ervius, Elias, SuperSport, francarl, and forgive me if I forget anyone.
Thank you to all french based cooks, and Chanvi, father of us all.
Thank you AmenatiS, you were my mentor. I hope I've done well enough
Olinex_2.20_hard_SPL
Official_HTC_Polaris_rom, to flash before my release
Link_FRA_21891_14_05_11(contains ROM+flashing_toolkit, updated)
Link_XDA-UC_folder, needed for correct post-install from SD Card)
Radio_1.59.46.12, eventual or needed
Have fun,
nAr
Dialer & Contact Utility Screens
Hint : to get full res of your contacts avatars on dialer main screen, save your contacts as 90 px x 90 px pics
when i get home ill give this a try, look out for a donation
About future versions :
- Cooking doesn't only require knowledge but time, most important. When you're a cook you can flash your phone several times a day with precise target in mind ... this reduces lifespan of hardware.
- I always think about refining details, gfx, themes, newer packages .... within the goal to keep reliability for end users. For that reason, lots of versions never come out.
- Some new versions will come, newer sys, etc. when I have time to release them
Thread is adequate to ask for support, I'll try to answer your questions & problems best I can
Best,
nAr
SiL3nTKiLL said:
when i get home ill give this a try, look out for a donation
Click to expand...
Click to collapse
Damn, you were too fast
Reserved 3
j'ai un xda orbit 2 avec un original firm de htc p3650 j'aimerai passe au version W 6.5 FR avec votre Rom mais j'arreverai pas plz add un vdeo ou image avec explication comment passer ce Rom pcqe cui un debutant et merci bcq d vos efforts .
ROMUpdateUtility.exe ne marche as
idder said:
ROMUpdateUtility.exe ne marche as
Click to expand...
Click to collapse
You use XP, Vista or Windows 7 ? (sorry, english forum)
On Vista or windows 7, it is often required to "run as administrator". Right click on ROMUpdateUtility.exe in order to do so.
hTC device must be sync via ActiveSync of WDMC before the flash
Olinex 2.20 must be installed prior to flashing the rom
Best regards,
nAr
j utilise Xp PR , j'ai deja installer Olinex 2 , j'ai flasher mon XDA avec plsr ROM ... mon seul problme ici avec ROMUpdateUtility.exe qui ne lance pas meme si j le exicute en tant qa admin ...
dsl por le dérangment
idder said:
j utilise Xp PR , j'ai deja installer Olinex 2 , j'ai flasher mon XDA avec plsr ROM ... mon seul problme ici avec ROMUpdateUtility.exe qui ne lance pas meme si j le exicute en tant qa admin ...
dsl por le dérangment
Click to expand...
Click to collapse
On my computer there is no problem launching the ROMUpdateUtility.exe.
May I suggest you extract all files again from archives, and try the flash again ?
Hint: For extraction, use only Wirar or 7Zip (free), no other soft please. Others can lead to unpacking file problems, leaving them corrupt.
Are there any other users getting that problem ?
Best,
nAr
EDIT: Links on 1st post updated, now RUU runs correctly. My mistake, hidden RUU .dll was missing ...
grand merci narshorn maintenant tout fonction tres bien j'ai reussi de flashi mon xda et installer les fichier dans XDA_UC folder .. 1 question comment j peut faire pour avoir l'ecran de bureau comme dans les pic o le bureau des HTC parcqe j'ai un bureau simple
démarrer
jeudi 19 mai 2011 17:59
si tout
idder said:
grand merci narshorn maintenant tout fonction tres bien j'ai reussi de flashi mon xda et installer les fichier dans XDA_UC folder .. 1 question comment j peut faire pour avoir l'ecran de bureau comme dans les pic o le bureau des HTC parcqe j'ai un bureau simple
démarrer
jeudi 19 mai 2011 17:59
si tout
Click to expand...
Click to collapse
At first boot GUI is disabled by default, to let XDA_UC have maximal resources to do its job.
After 2nd boot, and once Connection_Setup has finished:
In "Démarrer, Paramètres, Personnel, Aujourd'hui; onglet Eléments"
Untick "Date", tick "Sense" then OK
Hint : The XDA_UC installs automatically all elements in XDA_UC folder (if placed at root of storage card before the flash).
It prompts you for doing its job just after calibration.
So far; sorry for trolling, but xda_forums do use English language, so I invite you to use it too, instead of posting in french
Best,
nAr
?I flash this rom but I can't read french, can it be fixed
LOC9493 said:
?I flash this rom but I can't read french, can it be fixed
Click to expand...
Click to collapse
... Title of the thread says all ...
I don't plan to release a WWE rom for now ... I have too much work ...
Best,
nAr
Very great !!
Hi Narshorn,
Thank you very much for your hard work...
I used a Polaris but now I've an HD2...
But I gave my Polaris for my sister and she's not very happy with english rom Now I can give her a French rom and I like this.
Thank you much again.
Cheers.
narshorn said:
Preview :
- 2DManila_2_0_20163224_00 based main interface, fast flip_flop clock, Titanium also available as an alternative (built-in), Lockscreen from hTC_Mega, Mega_dialer, finger-friendly UI
- Proprietary monoKrom2 theme ( mostly black & green )
- 101,8 Mo RAM available, WM6.5 native kernel, no recmod has been done
- IE is not laggy ( no recmod of modules + smart_rOm cache values )
- Lots of tweaks and bug-fixes included in this release, that was hard work
- Quite good speed, stable rom
- Post-Install optimized for the SFR network. If you have different carrier, just remove "TV-musiqueSFR_FRA_WWE.cab" and "U_SUPL_AGPS_update.reg" from XDA_UC folder before flashing, all other elements good to keep.
Here are a few hints I give you, in order to have proper rom function and less bugs possible. Hopefully
----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
good work
waiting wwe rom please
Alors ça, si je m'y attendais! Une ROM WinMo 6.5 pour le Cruise!
I've the M-Amine 2.0 ROM, but there is the memory leak problem of WinMo. After 30-40 sms sent, i've not enough ram.
Does this ROM have the same problem? How much ram after first launch, and after 2-3 days?
Thanks for your awesome work, i wait your answer but i really think that i will install it.
Chapeau bas!
zinconnu said:
Alors ça, si je m'y attendais! Une ROM WinMo 6.5 pour le Cruise!
I've the M-Amine 2.0 ROM, but there is the memory leak problem of WinMo. After 30-40 sms sent, i've not enough ram.
Does this ROM have the same problem? How much ram after first launch, and after 2-3 days?
Thanks for your awesome work, i wait your answer but i really think that i will install it.
Chapeau bas!
Click to expand...
Click to collapse
Thank you very much.
I've not tried the intensive way you send sms, so I suggest you try the rom by yourself to see the behaviour
tmail.exe can be killed in taskmanager to re-open later, if problem is seen. I chose to add tmail to exclusive list for ever fast opening; however it consumes ram in the background. Up to 2 Mo if intensive e-mail, text, 3 days, etc ... but RAM should definitely not be an issue, 101,8 Mo total available.
narshorn said:
From 1st post Free RAM : 48 Mo average with m2d2 running all times, no extra soft running. It will boot m2d2 with 58,35 Mo RAM free ( once m2d2 and taskmanager just loaded ).
Click to expand...
Click to collapse
Hope this helps,
Best
nAr
It would be great a wwe rom with 3g dialer!
I'm very enjoy on your rom.
I hope someday you will release wwe rom soon. (I can't wait for that
Thanks for your great work rom.
After some trys to find why my marketplace stop open and working when i insert my cd key is because my country (Portugal) dont alow yet using marketplace , since i cant use in my contry anyone can send me a cdkey from UK or USA'??
TNKS to all
Hi. I'm also from Portugal, and i had no issue whatsoever using the market (downloading free apps, never tried payed ones). The cd key is Portuguese and the rom used was the original DFT one. Have you tried other roms mate? Cheers.
The first mail you have to use is a hotmail american or uk account.
Probably yout hotmail account has Portugal set in the country.
You can try and change but chances for it to work are low.
yes my acount is portuguese , i call to microsoft and they tell me that cd key is not valid for marketpace in portugal .. very stange if u can use them , maybe the problem is the country off my acount msn ...i dont know what to do ...
hi i allready erase my phone to factory i change the country in my hotmail acount , but still saying not possible bcs the country bla bla bla..
Dont change the account.
Create a new one and use that as default.
As i said above changing wouldn´t probably do nothing.
After you inserted the first uk or us account go to market, whatever and then insert you real account and leave the other one alone.
better to install again and insert that uk -us account after install.
is done i creat a new acount from USA , reset again my phone install again the cd key with usa acount and is done tnks to all..
now i can add my real msn acount and still using market yes?
ja agorsa visto que es tuga conheces maneira de fazer backup do wm7 ou dos contactos todos e as suas contas , visto que se flasharmos e tornarmos a meter tudo de novo perdemos os jogos aplicacoes , os contactos etc...
wolfpt said:
ja agorsa visto que es tuga conheces maneira de fazer backup do wm7 ou dos contactos todos e as suas contas , visto que se flasharmos e tornarmos a meter tudo de novo perdemos os jogos aplicacoes , os contactos etc...
Click to expand...
Click to collapse
English please...
wolfpt said:
After some trys to find why my marketplace stop open and working when i insert my cd key is because my country (Portugal) dont alow yet using marketplace , since i cant use in my contry anyone can send me a cdkey from UK or USA'??
TNKS to all
Click to expand...
Click to collapse
cd key? wtf you talking about lol
Greetings Tuga before i installed WP7 i created a GMAIL acount and synchronized all contacts after WP7 just log in your google account on your phone and sync them again. As for Marketplace in your phone settings you have to set location to United States or else you cannot access . Hope this will help you.
key for windows live , lol forget "CD" LOL
windows 7 sucks
Help with windows market
I try a lot of different ways to download and install apps and nothing.
I can see all app in the market but when I try too install I get this error (you need to update your phone using the zune software) but in zune software I alredy upgrade my phone to the max...
I have "back from future" rom installed