Couple of questions (SDHC and WM6 upgrade) - Wing, P4350 General

Guys, first of all, thanks for the forums, this is great.
I got my hands on a pre-production herald unit and I have a couple of questions. First of all, here is what I see when I soft-reset:
IPL 3.80.001
SPL 3.80.001
GSM 02.69.90
OS 3.80.0.0
It's unbranded and the serial number starts with TY so HTC's e-club doesn't want to accept it ... here are my questions:
1. Can I CID unlock it and use the latest WM6 roms?
2. I put a 6GB microSD card in there and it'll only see 1.7GB. If I use the sdhc.77 cab file, it works for a while, and eventually stops workings (files disapear). I soft reset, and everything comes back to normal for a couple of minutes.
Can someone help me out?

Well id HTC e-club does not accept your serial number, is because your herald is branded with a phone provider's rom! I had that problem too.
When you start up your phone, doyou see your phone provider's company name?
That's a giveaway that it is cid locked!
Upgrading to wm6 does not cid UNlock your device! Everyone is waiting for the HARD-SPL to really work.
But untill then, the easiest way to free yourse;f from wm5, is to install touch-it 1.1 and then you have a nice wm6 rom on your herald.

thanks for the reply. No, it's not branded at all ... like I said, it's preproduction unit.
Is my radio version new enough for me to upgrade? Will the phone still work afterwards?

yes, it is!

Related

Special Edition WM2003 Rom?

ok, i have installed the special edition rom for my xda1 and its a definate improvement over the original rom..
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
of course, if there was a xda-developers special edition rom based on wm2003 that would be the best solution... :?
Nas
There are many WM 2003 ROMs and most of them works quite fine ... try the kitchen at www.yorch.net or http://lumpistefan.dyndns.org/
nasman said:
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
Click to expand...
Click to collapse
Where is the WM2003 upgrade from O2??????
Give me alink to download please...
Stefan
I didnt know there was one, anybody else seen it?
nope i cant see it.
my bad
soz, not from o2, just the ones from other providers that are floating about.
Re: my bad
nasman said:
soz, not from o2, just the ones from other providers that are floating about.
Click to expand...
Click to collapse
Just do it, upgrade it! I upgraded my Siemens SX56 with AT&T to 2003 and than cooked the rom from Yorch to unlock. By the way, it is a very good rom, thanks Yorch.
I did it with SD cards one of my XDA's, it worked perfect and quick: saved 2003 rom on one card, cooked Yorche's on another. The saving and installation was done through the bootloader as discribed in the proceedures in frequently asked questions section. The extracting and saving of Yorche's rom was done through OSImageTool in XDAtools into an SD card inserted in a USB card reader/writer (Inland 9 in 1 card Reader/Writer, $10 at Micro Center). The battery was fully charged on my SX56 and the flashing of rom's back and forth was done without the XDA being pluged to power unit. I tested the unlocking with a T-Mobile card, it recognised it, I made some phone calls with no problems, kept Yorch cooked rom for two days to get to know it and then flashed it back with my SD saved 2003 rom in my friends apartment just to show off how easy it is to flash the rom. it worked very well (it took about 5 minutes).
The 2nd SX56 was done all through ActiveSync with the XDA and card reader/writer pluged in and all synchronised (allscreen savers, power savers etc on PC and XDA OFF and battery charged). This XDA still had the original 2002 rom. The unlocking went very smooth. I did a full back up of the rom with ActiveSync. Since the cooked rom is PW10A1 and mine was PW10B1 I needed to get back my original rom to the XDA. The restore didn't work because it is a different partnership. So I flashed it back with my SD saved 2003 rom in a card reader/writer and OSImadeTool through ActiveSync. Everything was fine all the way to hard reset. I waited a minuteor so and did a hard reset and nothing happened, did it couple of times, nothing. It would not restart. I pressed the power botton and it went to bootloader mode. I did soft reset and the unit goes blank, dead. So I inserted the SD card with my 2003 rom into the XDA's memory slot and did the the bootloader mode, it took it, I flashed it. And now I have my 2nd SX56 with 2003 rom and the old radio stack ulocked working like a champ. I tasted with T-Mobile card and it works instantly, no configurations needed. Now I have to do a complete upgrade.
After all I like the new 2003 better but with some of the programs from Yorch Kitchen rom, which I installed and they work fine.
You, ladies and gentlemen, at XDA-Developers are the greatest thing that happened to the mobile devices community. I honor you and thank you. And Peter Poelman, you are the wizard, thank you.
John
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
tommy_kiss79 said:
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
Click to expand...
Click to collapse
Look here for the answers:
http://wiki.xda-developers.com/wiki/FAQ
and here to cook the rom:
www.yorch.net
check what you want or don't want and click Build ROM now, after it is done click Download. Before you build and download choose which file you want, exe or nb1. What ever you do backup your original rom preferably and safer to an SD card either through OSImageTools in XDATools and ActiveSync or the mode and the SD card pluged into your XDA
bootloader, and read the forum in details...
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Good luck, John
saracen said:
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Click to expand...
Click to collapse
John (and any others out there),
I hope that I'm not asking something here that is covered in some faq on this board and I think I've read them all, but...
I see mention of a lot of versions. 4.00.21, 4.00.01, A30.05, A30.09 etc...
Is there someone that can tell us new guys a little more about these? IE, what is it exactly, 2003, 2002, beta, final, alpha?
I recently bought a Wallaby, and want very much to use the MS Voice Command. Therefore, I have a definate need for a 2003 rom. I have read and reread the forums here and have a good handle on how to flash my rom, but I'm so confused as to what the best (read most reliable) rom to install, as well what radio version would work with the given rom choice. I'm not necessarily asking for a recommendation, but perhaps a nudge in the write direction.
Sorry to dump on you in particular, nothing personal either mind you! It's just that I'd love to read a FAQ for the different versions and what might be expected from them I guess. (I hope like heck I'm making sense here!)
Thanks!
Larry
Hello,
Actually, the only difference between ROM versions is bug fixing with newer versions, but the only significant factor is whether it's PPC 2002 or WM 2003 ROM.
For upgrading, I may recommend TMO 4.01.00 (my personal preference) or A30.09 (with a minor sound issue). If you need to unlock your device you must start with PPC2002 3.17 ROM first then select any WM2003 later.
There is no connection between the ROM and RSU. However, the RSU is the most sensitive part in the XDA. If you have a functioning RSU ... do NOT touch it!!
Last, get a SD card and take a backup ... it's safer and you can use the SD to upgrade as well.
Good luck ...
This is to Larry,
All these replies take you through the right directions. I have two Siemens SX56 devices with AT&T Wireless, both PW10B1, Pocket PC2002 (Ver. 3.0.12039), ROM Ver. A.20.17 ENG, RADIO Ver. A.20.10, 32MB Rom.
1st one I upgraded the day AT&T and Siemens released the Mobile 2003 free upgrade. As much as people complained, cursed and were distroying there SX56 devices ( what I read on AT&T forums) I never had any problems, and as a matter of fact the more I used the device the better it became. I played with it for about two weeks and then I decided to unlock it. So I placed my SD card into the SX56, started the bootloader, downloaded the original 2003 Rom image, soft reset the device. I cooked the Special Edition Rom based on 3.17.03 O2 ROM in Yorch Kitchen, I built the nb1 file, I downloaded, extracted with WinZip, put it on another SD card, put the card in my SX56 device, started the bootloader, flashed it, did a hard reset. It didn't ask me if I wanted to unlock it but the XDAunlock program was there, I taped it, it asked me if I want to unlock, I did. I checked it with a T-Mobile sim card, made a phone call with no problem (I tested with the same card before and after, before asked me for the pin number and after it logged in to T-Mobile network). I used it with the Special Edition Rom for about a week to see which programs I liked and wanted to install on my device after I flash back to saved Mobile 2003 Rom. I flashed it back with the 2003 Rom image. I was on the road, away from power supply, my pc, usb ports etc. Just the unit with its battery charged up, the SD card and the bootloader. It took 5 minutes.
My 2nd SX56 device I did before the 2003 upgrade, the original 2002 still there, with ActiveSync, OSImageTool in XDATools, SD cards, card reader/writer and nb1 file. This time I overlooked the saving of the original 2002 Rom and it went directly into the flashing with the Special Edition Rom cooked in Yorch Kitchen. I unlocked it, tested with T-Mobile sim card and flashed it back with the the Mobile 2003 Rom image saved from my 1st SX56 device. It didn't want to wake up after the hard reset. It kept going to the bootloader mode. So I inserted the SD card into the SX56, started the bootloader , flashed it back again with Mobile 2003 Rom, did a hard reset. It worked. Now I have my 2nd SX56 with new mobile 2003 Rom but old, the original Radio Stack from Pocket PC 2002. It works fine. The working is like the Upgraded 2003 device. Maybe with the older radio Stack is more stable on the signal, and I don't know for sure because I did not tested, only what I read and the people having problems. My preference is a total upgrade, the Rom and the Radio Stack, I noticed that the audio quality is better with the total upgrade, specialy when on the speaker phone during a phone call.
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
saracen said:
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
Click to expand...
Click to collapse
Thanks, guys!
I kind of knew that the differences were a matter of bug fixes, what I wasn't sure of is which is 2003 or 2002. I'm going to keep reading here of course. This is a fantastic site to be sure!
So, bottom line is I guess I'm just going to pick a couple of them and flash them and play with them so which works the best.
Many thanks again guys! Larry
Larry,
Yes, exactly. I forgot to say that my new rom is an AT&T- Siemens: ROM Ver. A.30.09 ENG, Radio Stack A.33.02. The previous Rom version had a band switch (900 for Europe or 1900 for Americas) in the Settings and under Phone but now with the new it has an auto configuration which I like better. I can always search the network manually. By accident I found that if you set it to manual and don't have a network specified or any signal strength showing as long as the phone is turned ON, I can still get on Internet.
Good luck, John
One final ?
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
I first came to xda-developers when I was trying to use my Qtek as a modem....thereafter we saw the O2 and Qtek PPC (2002) upgrades that brought in the Wmodem utility.
That seems to have disappeared off the priority list for most people these days, though.
Cheers
Sands
Sandyind said:
That seems to have disappeared off the priority list for most people these days, though
Click to expand...
Click to collapse
IMHO, the new PCs/laptops with either built-in WiFi or WLAN functions or with equivalent PCMCIA cards, or even with SIM module inside, made it out of the wishlist
Re: One final ?
sandyind said:
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
Click to expand...
Click to collapse
The German Version 4.00.33 from t-mobile comes with the wmodem application
HTH
Stefan
Stefan,
Is there an English version of Mobile 2003 with wireless modem for PW10B1 XDA?
Thanks, John
Can't receive USA Cingular signal 850mhz- Help Anyone?
I've posted on some other forums but no-one seems to have an answer. Can an unlocked AT&T SX56 be adjusted to work on the Cingular 850mhz system?
Help!!
Doc

Unlocking M600 from orange

Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks

M3100 Incoming call problems

I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
test67 said:
I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
Click to expand...
Click to collapse
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
boz said:
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
Click to expand...
Click to collapse
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
test67 said:
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
Click to expand...
Click to collapse
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
boz said:
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
Click to expand...
Click to collapse
looks like the problem is with T Mobile in my area, but thanks for the help !

cid-unlock + simunlock + wm6 + touchflo on SPV M650?

hello,
first of all, sorry for my bad english.
1. I didn't found anything here about sim unlocking my SPV M650. will lokiwiz3 work?
2. my spv is on Orange ROM, how could i move on wm6 and where could i download it, before having cidunlocked my m650?
3. I saw on the internet that someone succeed in installing a plugin simulating the Touchflo, as on HTC touch (!!!), where could i find it?
many thx.
pmusa said:
hello,
first of all, sorry for my bad english.
1. I didn't found anything here about sim unlocking my SPV M650. will lokiwiz3 work?
2. my spv is on Orange ROM, how could i move on wm6 and where could i download it, before having cidunlocked my m650?
3. I saw on the internet that someone succeed in installing a plugin simulating the Touchflo, as on HTC touch (!!!), where could i find it?
many thx.
Click to expand...
Click to collapse
Hi PMUSA
all the answer to your questions are in the forums.
Just search the topics.
You need USPL to load a rom from here that is not designed firstly for your phone..
ok magpie2000K, thx, i already viewed this topic about USPL:
http://forum.xda-developers.com/showthread.php?t=311403
but nothing about SIM unlocking
moreover, i would like to know where i could find a WM6 for my SPV M650. I have the Shap's HTC Tytn ROM on my external hard disk drive, will it also work for the M650????
because in the topic it says:
"This means you can flash ANY ROM to your Artemis after flashing USPL on it"
thx for your precisions
pmusa
well that's because no one has been able to come up with a way to unlock it yet (atleast none for free). you'll find two ways to sim unlock your phone here, if you'll just browse through the forums in artemis upgrading topic. but you'll have to pay for it via paypal.
about the wm6 rom, you can find one in the topic artemis mobile 6. there's a thread there that's especially started for french spv m650 users. sorry i can't post the links though, but you'll find them easily enough.
pmusa
here is the link for the sim unlocking (not for free)
http://forum.xda-developers.com/showthread.php?t=314154
and for wm6 for spv
http://forum.xda-developers.com/showthread.php?t=313713
i also have spv m650 but i couldn't get my gps to work with wm6, eventually i returned it to original spv orange rom.
i hope yours will be okay.
thx redski.
i'm installing, i'll leave a feedback.
so, currently, there isn't any other way to SIM unlock the SPV M650?
the only one is imei-check? 30€, omg...
maybe HERMES sim unlocker v3 should work, i'll pray and try. ^^
pmusa said:
thx redski.
i'm installing, i'll leave a feedback.
so, currently, there isn't any other way to SIM unlock the SPV M650?
the only one is imei-check? 30€, omg...
maybe HERMES sim unlocker v3 should work, i'll pray and try. ^^
Click to expand...
Click to collapse
please let me know if it does, and also if your gps works after upgrading to wm6.
thanks!!!
so, i upgraded to WM6 using Tom's BnB ROM, because i heared it supports GPS on SPV M650, but... i forgot to test it! (lol :S) I was'nt satisfied because it was too skinned, virtualkeyboard skinned too and QWERTY, so i "uninstalled" it and moved on Official HTC's ROM for the P3300. But the GPS currently doesn't work on HTC rom.
So now i am going to download Orange's latest ROM and flash it, i will also apply htc_default.tsk theme because Orange's theme sucks
...
Is someone working on how to unlock the Artemis with a software like lokiwiz????
...Once upon a time....
pmusa said:
so, i upgraded to WM6 using Tom's BnB ROM, because i heared it supports GPS on SPV M650, but... i forgot to test it! (lol :S) I was'nt satisfied because it was too skinned, virtualkeyboard skinned too and QWERTY, so i "uninstalled" it and moved on Official HTC's ROM for the P3300. But the GPS currently doesn't work on HTC rom.
So now i am going to download Orange's latest ROM and flash it, i will also apply htc_default.tsk theme because Orange's theme sucks
...
Is someone working on how to unlock the Artemis with a software like lokiwiz????
Click to expand...
Click to collapse
...Pof, Perjan and many other good men were working on a software to SIM unlock...perhaps possible CID Unlock the ARTEMIS, but other demands in life - exams, work around and very many things made the effort die a natural death....
I can only advise you not to wait up for it.
Go the previous ways advised - I would hassle tupisdin, if I wasn't given a free code to SIM Unlock mine - For SIM Unlock
...and the USPL developed by pof empowers me to flash..so I don't need to give imei-check.co.uk any more money.
sorry, i did'nt understand. do you mean that i should contact tupisdin so that he could give me a free simunlock code?
or do you mean that USPL also simunlock the artemis?
pmusa said:
sorry, i did'nt understand. do you mean that i should contact tupisdin so that he could give me a free simunlock code?
or do you mean that USPL also simunlock the artemis?
Click to expand...
Click to collapse
There is no free simunlocker for the Artemis. The Lokiwiz thingy does not work on this model. The USPL only cid-unlocks your device temporarily so that you are able to flash another ROM, but it does not unlock the sim.
ok now it's clear.
30€ is too expensive (imei-check)
who is tupisdin and how much a simunlocking costs?
thx
pmusa said:
who is tupisdin and how much a simunlocking costs?
Click to expand...
Click to collapse
I don't know, so why don't you ask him? There is a thread called Sim Unlock when you scroll down a few lines. That thread is made by tupisdin.
yes, i sent him a PM.
thx
redski> i moved on Orange's latest ROM, now GPS works again...
pmusa said:
yes, i sent him a PM.
thx
Click to expand...
Click to collapse
Thats the best you can do....his terms are not the clearest
HOW
UNLOCK SIM FOR HTC Artemis/Hero(T-Mobile MDA Compact3, HTC P3300)
--------------------------------------------------------------------------------
READ THIS http://www.imei-check.co.uk/c3unlock.php
Step 1 - Enter Data for unlocking your HTC Artemis/Hero
HTC Artemis/Hero(T-Mobile MDA Compact3, SPV M650, XDA Orbit, Dopod P800, HTC P3300)
(removes SIM/NETWORK LOCK - use any provider, removes CID lock - flash any firmware)
A key file matching your IMEI will be send to the paypal account email address
DO NOT USE the IMEI from the BOX as it may be different from that of the phone.
IMEI:
.
Note that the unlocker work only under Windows 2000/XP/VISTA.
How To:
1. Save the UNL file received from us. Save the C3v2Unlock.zip to your computer and unzip it.
2. turn phone on and connect to pc (green ActiveSync icon in system tray)
WHAT THEY MEAN BY SAYING A KEY FILE FOR THE IMEI . JUST VISIT YOUR SUPPLIER SITE.
: I DO NOT HAVE A KEY FILE.....!!!!
ANY ONE CAN CONFIRM THAT CAN UNLOCK BLOCKED T-Mobile MDA Compact III....!!! ASAP
THANKS YOU IN ADVANCE.
Regards,
KINGBACK
Tout est là :
http://www.ppccool.com/index.php?showtopic=6725

Softbank X01HT questions..

Hi all, I've received a really deal good for a Softbank X01HT. I was wondering if like the other Hermes, the only difference in this unit is the button layout and OS language. If I upgrade to any other Hermes ROM will it function like a regular Hermes? Thank you for replies.
Yes, basically it will work as long as you have your device SIM / CID unlocked.
I say 'basically' because of I found some incompatibilities on my HERMES (a AT&T 8525). It does not accept the German T-Mobile ROM and also not the ORANGE CH. Other than that I did not get any problems.
You might wanna read the HERMES UPGRADE sections in the WIKI first? That should get you started!
Thanks for your quick reply Junner, I appreciate it
Another question has arisen; the unit I'm getting is in english language, so presumably a different ROM has been flashed to it. Does this mean that the phone is now SIM unlocked? Or does Softbank have english versions of their phones as well? Mine will be a white one, not sure when it was manufactured.
Hello,
If its already in English then chances are that it was flashed with a WM5 English ROM. If you're lucky, then the phone could be SIM unlocked, but ROMs can be flashed if the phone is Super CIDed... The white edition models were made after Softbank issued an update for all their phones..
My bet is that your phone is Super CIDed.. but heck, you'll never know these days, you could get lucky and have it SIM unlocked!
Softbank do have english versions of their phones, but the X01HT is just one of their exceptions...
I'm using the Black X01HT flashed with a WM6 Rom.. and its great! You won't be dissapointed!
Hey nesy, thanks for the heads up. I've got the phone in my hands, it works great. It's been flashed with some version of WM6, not sure which flavour. And it's goot IPL 1.01 and SPL 1.40.Olipro. My guess is that this was unlocked by imei-check, and it must be SuperCID too. Will be sure once I probe the internals with mtty. My only concern now is whether if I'm able to upgrade the radio, since I've read reports of some people being unable to flash over radio 1.14.something.
Is there really a downside to being stuck at radio 1.14 found in the Softbank phones? If so, what are they? Improved reception? stability?
well my softbank phone was at radio 1.14, I was able to upgrade it without any problems to 1.50.... you dont really have to upgrade, but I found that any version above 1.2 had better battery life...
I have a X01 that I just bought with a Chinese ROM (I am currently in China) and it was already unlocked. I had no problems putting an English Rom on. Be sure to change the keyboard layout to Japanese, I had mine set to Chinese for a while and 2 buttons were different.
Question: What are the advantages to upgrading the radio? Can anyone provide a link that explains how to upgrade / advantages to upgrading?
neshyd said:
well my softbank phone was at radio 1.14, I was able to upgrade it without any problems to 1.50.... you dont really have to upgrade, but I found that any version above 1.2 had better battery life...
Click to expand...
Click to collapse
really? how were you able to upgrade? i thought it was impossible to upgrade the radio on a softbank
pasan said:
really? how were you able to upgrade? i thought it was impossible to upgrade the radio on a softbank
Click to expand...
Click to collapse
I also just upgraded to 1.41... I use the method that temporarily Super-Cids it. But dont ask me how that works because I have no idea.
Could you link me or PM me with how you did that? All the wikis stated that I can't upgrade the radio to anything else because of the bootloader. And I tried it too, the radio ROM gets flashed, but upon reboot, the same old version number is shown. Thanks in advance.
courtlandre said:
I have a X01 that I just bought with a Chinese ROM (I am currently in China) and it was already unlocked. I had no problems putting an English Rom on. Be sure to change the keyboard layout to Japanese, I had mine set to Chinese for a while and 2 buttons were different.
Question: What are the advantages to upgrading the radio? Can anyone provide a link that explains how to upgrade / advantages to upgrading?
Click to expand...
Click to collapse
Hey dude, there are many advantages to upgrading the radio.. especially if you're still at 1.14... For instance, in Japan and China, the networks are UMTS here... although radio 1.14 gives satisfactory reception, higher versions improve this as well as enabling HSDPA (higher 3G download speeds) . The battery management is improved, and currently I'm using radio version 1.48 (1.50 was a battery sucker when using WM6)
you should read this before upgrading the radio:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and read under 'Upgrading and Cooking'
and to flash the radio you HAVE to install Hard SPL.. this is a modified bootloader for the hermes.. and also it prevents it from bricking when you upgrade the ROM or radio.
Get it and the guide here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Finally,
Go here:http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
and choose what Extracted Radio ROM that you want to install. Download it, run the EXE file and run through the program wizard.
After the radio has been uploaded to your device, it should reboot and you'll hopefully see some improvement!
Also another thing, be sure to search the forums, there are many great guides here, much better than my attempt
Hopefully that answers your question Pasan, you could try to do the method mentioned above by courtlandre which is to temporarily SuperCID it, but I didn't use that, i ended up unlocking my phone and SuperCID'ed it... so that my upgrade process will always be stress-free
pasan said:
Could you link me or PM me with how you did that? All the wikis stated that I can't upgrade the radio to anything else because of the bootloader. And I tried it too, the radio ROM gets flashed, but upon reboot, the same old version number is shown. Thanks in advance.
Click to expand...
Click to collapse
I am using SPL 1.10 I think (wiki or a sticky will have instructions on how to install this).
Then I just downloaded the radio rom and installed it. Worked fine with no problems.
Thanks neshyd, I once tried upgrading to HardSPL 2.30 but it didn't work, upon reboot it was still on 1.40.olipro. This phone was unlocked by the imei-check people and they may have done something to prevent future SPL upgrades.
courtlandre said:
I also just upgraded to 1.41... I use the method that temporarily Super-Cids it. But dont ask me how that works because I have no idea.
Click to expand...
Click to collapse
is this SSPL?
I guess you guys have older Softbanks, mine is a post April 07 model which does not allow the radio to be upgraded

Categories

Resources