I have the standard t-mobile rom, I haven't even tried to CID unlock, or flash any roms onto it yet.
Today, I turned on my phone, it went to the T-mobile boot screen with the red text at the top left corner. Then, it almost changes to the windows mobile screen, then shuts off.
Everytime I try to turn it on, it either turns off at the T-mobile screen, or doesn't turn on at all.
What's wrong?
Thanks!
Related
I was trying to upgrade my rom using xelencin's so i had to pick my mom up and left my mda at home to upgrade i came back home and look at my mda and saw it was on 98% but noticed my monitor was off. I tried moving the mouse around but my freakin comptuer was off. I did a soft reset and all I see is a three colored screen. red, gree, and blue. I tried using the unlock programs but my mda won't connect via activesync. is my phone gone? help!!!
Its normal for a ROM flash to hit 98% and stay there.
The bad news: any data you had on that phone is probably history, unless its on the MiniSD card.
The good news: Your phone isn't likely bricked, if it can boot to that three-color screen.
Plug the phone in, reflash the ROM from an executable from T-mobile, leave it alone when it hits the 98% mark, and you should be fine. Then, reflash to the ROM you want.
Of course, first make sure the battery on the MDA is fully charged, and you have disabled system standby on your PC.
Disclaimer: Use my info at your own risk.
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
AgentBignose said:
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
Click to expand...
Click to collapse
It seems to be broken.Go to service.
Tadeusz said:
It seems to be broken.Go to service.
Click to expand...
Click to collapse
Yes I also think so.
Do you know how long it takes to let an Athena Repair?
My wing keeps locking at the windows mobile screen. Pressing buttons light up the screen and the keypad, but nothing changes on the screen.
If I reboot the T-Mobile logo comes up, makes the noise, the windows mobile logo comes up, and it never gets past there.
I have tried hard-reseting, and soft-reseting. Have also tried with the phone plugged in.
The phone is not modified at all, and does not have a SD card. The phone was working normally a couple days ago.
Suggestions?
This is a complete guess, and be warned I'm no expert at this so do at your own risk, but perhaps you could try installing a cooked or at least different ROM to see if it fixes your problem?
doubledownn24 said:
My wing keeps locking at the windows mobile screen. Pressing buttons light up the screen and the keypad, but nothing changes on the screen.
If I reboot the T-Mobile logo comes up, makes the noise, the windows mobile logo comes up, and it never gets past there.
I have tried hard-reseting, and soft-reseting. Have also tried with the phone plugged in.
The phone is not modified at all, and does not have a SD card. The phone was working normally a couple days ago.
Suggestions?
Click to expand...
Click to collapse
Put it into the bootloader and reload the stock ROM. If it still freezes, it might be an issue with the phone hardware itself.
I just realized that my phone was like... dead. It turns on and I can synch with it in windows, but the screen is completly black and without image. I can receive calls. Before this I was not able to turn it on. Then it turned on and showed something like ChipID error, then it went black until now. When I plug it to the computer it doesn't seem to be charging (no orange light) I have hardspl in it. Also I didn't do anything special with it, I simply foud the phone like that today, it has been weeks since I flashed a rom or something. Any ideas?
pisiiki said:
I just realized that my phone was like... dead. It turns on and I can synch with it in windows, but the screen is completly black and without image. I can receive calls. Before this I was not able to turn it on. Then it turned on and showed something like ChipID error, then it went black until now. When I plug it to the computer it doesn't seem to be charging (no orange light) I have hardspl in it. Also I didn't do anything special with it, I simply foud the phone like that today, it has been weeks since I flashed a rom or something. Any ideas?
Click to expand...
Click to collapse
Could be a faulty screen. Have you tried a hard reset
Yeah, I also did some hard resets. I think the screen got damaged at some point when I was unable to turn on the phone. Eventually when it worked it showed some weird error after startup in a message box. After this allways black screen (and no backlit and orange light of charge), also reflashed because the thing is working, it vibrates on startup (after 25 seconds) and plays the htc tune, it enters windows mobile too and I can receive calls but it keeps it all black.
I contacted the customer support of the online store, I will simply ask for a repair or replacement.
Thanks.
I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
*need help on pre-installed boot screen*
I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
Install euro firmware with bootloaders. JJ4 is good one since it's bootloader is not signed. Then you can install newer euro firmware over it.
However, so far there is no known way to go back to AT&T bootloaders. So you ca't fully restore to AT&T if needed.
Sent from my GT-P1000 using XDA App
Thanks
Thank you for your reply, I will think about it! Seem's I have to make a choice. But at least there is a way to fix the problem.
Thanks!!!!!!!!!!!!!!
I got a samsung vibrant Tmobile and after flashing a custom Rom
I got AT&T bootup screen! Any answer will be appreciate !
There is a thread for this titled "How to fix at&t black screen with thin white line at boot up". I know you can find it by searching - I wrote it.