I recently bought an AData SD card (150 speed, 2 GB), the one that is often mentioned here as 'doesn't work'. That seemed to be true: I inserted the card into my MDA and the device asked to format it. Of course the card wasn't recognized after the formatting procedure.
I noticed that my other card that the device can read contains the file 'ignore_my_docs' (hidden). I copied the file to the new card with a card reader and after that the card works flawless! Can anyone confirm this?
i got a 4GB HC from PNY and i placed that file there... guess what? doesnt work.
try formattin it under windows xp...magician supports upto 4gb
Related
My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards
same problem here bought my card in singapore too... some people have reported it to work. Would appreciate if someone could figure it out.
Maybe it's a specific brand that does not work?
Jainoxi said:
Maybe it's a specific brand that does not work?
Click to expand...
Click to collapse
Well that's what I thought, but this card seems to work ok through the card reader so I can't figure out if it's card or the xda mini which is at fault ??? Meanwhile my xda mini accepts my other cards. Any one has any clues as to what might be the problem ?
samiranm said:
My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards
Click to expand...
Click to collapse
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.
My SanDisk Ultra II 2gig card from MobyMemory works perfectly
frendrick said:
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.
Click to expand...
Click to collapse
Running a different frequency? I thought there was a SD compatible format, and that all SD card are made accordingly...
I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M
I have exactly the same problem with the MyFlash (AData) 2GB as well on my O2 Mini.
Swap 3 cards already (different batches) and all had the same problem.
I've experience problem copying files to it from my laptop as well. I used a USB2.0 SD reader/writer and copied a large 900MB file to it - got the following error after a while:
Windows Delayed write error. Path is too deep
My Explorer hangs from that point. Same thing happened for all 3 cards.
I'm staying away from this AData 2GB for now.
cheers,
Patrick
Fresh Freddie:
What the price Sandisk II Ultra 2 Giga ?
sd card problems
Price: £131.99 (£131.99 Inc. VAT)
Thanks Bushmen.
Their own brand for £99.99 incl.VAT !
http://www.mobymemory.com/HiSpeed_SD_Memory_Cards.asp
Caution : further to my last post :
http://forum.xda-developers.com/viewtopic.php?t=25289&highlight=
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.
plt,
have you tried the trick that Mashie mentioned?
Mashie said:
I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M
Click to expand...
Click to collapse
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Click to expand...
Click to collapse
I've had the same problem with this card on my JAM- simply does not recognise it at all (therefore cannot even try Mashie's method).
Tried it on my mate's XDA ii and it works straight away (ended up selling to him). What is it with these not supporting particular 2GB cards.
I think as a rule of thumb, those 2GB card which are 60x speed should work:
Sandisk - probably not the Extreme III
ATP 2GB
PNY 2GB
All of these are far more expensive than the Adata and others from the far east.
plt said:
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.
Click to expand...
Click to collapse
ADATA My Flash 1GB card doesn't work as well.
Have you tryed to format the card with your SD-Reader card? or best install Pocket Mechanic and try format with some other FAT options.
Good luck!
I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.
I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.
Click to expand...
Click to collapse
The only obvious differences between this one the other ADATA one is that this one is MMC and a faster speed.
Still strange that it does work (or why this one works and not the others).
I have ordered yet another 2GB SD; will post to let you guys know if it works or not.
I have a 2gb SD card that was working, but I thought I would be clever and use the SD reader in my Tosh so that I could transfer large files more easily to the card for my exec. But when I was asked to format my card by Toshiba's software, I went through the process and thought it was successful. But then at end of process the phrase "Please stop a SD memory card, then insert the card again" came up, so took card out, re-entered it in the reader and tried to attempt to transfer files to it. However windows then told me that it was not formatted and would I like to format it. So yes, I do, but although windows formatted it, it reduced the capacity from 2gb to 956 mb or thereabouts. It was recognised by the exec again, but with severe consequences as never bought a 1 gb card.
Help please...
Sounds to me like your card reader doesn't read cards bigger than 1 GB. I had the same issue with my 4 GB card. Tried it with a different reader and the PC saw all 4 gigs, never asking me to format. See if you can try a newer SD card reader?
The same thing happened to me with a 1 gigabyte pcmcia card. It was working fine in my laptop then I put it in the card slot on an Ipaq and it also did a format. The card is now exactly half the memory it should be and no way can I get it to work as a 1 gig card even though I have tried formatting on the pc.
I have found that my 2GB card formatted on my Palm LifeDrive was not readable on my laptop. When I formatted using a Toshiba format utility the space on the card was down to 1GB. It did work okay on my JJ. I had to re-format it on my Palm and then for reason it was okay again and could be read by my laptop - I did not use any card readers as the laptop has a built-in reader. And I re-formatted on my laptop using XP format softwsre and the 2GB storage was retained.
@Wannabe, have you got access to another PC or card reader to reformat your card. Also I found WM5 file managers could not reformat and regain the lost capacity
been on to Tosh
Toshiba are extremely helpful...not! Told me to get another card and see if that works as it might not accept the card. This is a Sandisk card which I believe is made by Toshiba...or at least in collaboration. Am going to check Sandisk for an answer as well...keep the ideas coming please
Hi there.
Try reading this post i made ages ago about formatting and re-newing your sd cards. It might help. It is regarding my 512mb sd card, but the principles are the same.
http://forum.xda-developers.com/viewtopic.php?t=21920&highlight=lydiachris
I strongly recommend using media recover, even if it's only a trial version to "wipe" your sd card to re-new it to it's factory condition. It covers and re-formats the whole card sector by sector.
http://www.mediarecover.com/
Give it a go and let us know.
Regards
lydiachris
If none of the other suggestions work then try this program that I posted on another thread:-
SDFormatter.zip:
http://forum.xda-developers.com/viewtopic.php?t=30900&highlight=
Use it with a card reader, follow instructions and your PPC should be able to read the full capacity.
SanDisk have taken back card...
Thanks for the suggestions, will keep in mind for future. Sandisk took back the card and found that it had become corrupted so have sent out another one. tks for suggestions though.
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
am i missing something? thanks.
blazin-asian said:
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
Click to expand...
Click to collapse
I have a 2GB Sandisk in my Cingular 8125 and haven't had any problems with the card. I've had some problems with the phone, but not the card.
You should return/exchange it.
Fairly common prob with the 2gb cards,esp the sandisk - try formating the card fat16 on your device, with storage tools or sktools (google both) demos will format your card.
Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.
I do so, but there is no storage card.
The mobile device also says that there is no storage card.
I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...
8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.
If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...