hi all,
i got a 9090 from a mate a yesterday.
wm6 was installed. (OS 5.2.1620 )
now i put in my vodafone prepaid sim in it (holland , the netherlands) but the bleu angels wont give any connection (gsm)
i found out there wasnt a radio-rom in my blue angel.
the question is.
can u call someone without a radio-rom?
i did watch the forums and found out that a 1.15 radio-rom is available.
if i install the radio rom u think i have connection?
*srry for my english... and yes i did read the forum but coudent find this awnser..
1. No, you cant use the phone without a radio rom
2. Yes, you can flash the radio 1.15
DANDANA said:
1. No, you cant use the phone without a radio rom
2. Yes, you can flash the radio 1.15
Click to expand...
Click to collapse
ty ! that means that my phone isnt stuck but just a lack of the radio-rom.!
Just one comment: did you try to make a soft reset? RadioROM does not show when you first put battery in. You need to turn it on and then, after 5-10s make a soft-reset - radio rom should show up.
Also, if your device is locked to another operator, it will seen as if the BA could not access network, but in fact in the SIM lock problem.
At least, that's what happened to me.
JP
Related
Hi, has anyone figured out what the difference between the i-mate Radio v1.05.00 WWE and the v1.1.0.00 US is ?
Any one using the v1.10.00 outside the US ? Any problems or hints ?
Torsten
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
sozon said:
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
Click to expand...
Click to collapse
hmm, i upgrade to 1.10.00 usa radio and its fork fine!
i use it at european gsm (russia, dalsvyaz) standart 900/1800.
but i don't know which things changed
anybody knows ?
where to get it and i will give it a try... we use here gsm 900....
I wonder if this will fix the problem some of us are having with the 1.6 ROM upgrade with not being able to re-connect to GPRS without a soft reset or switching flight mode on/off. Any thoughts?
to many drinks on my side!
This is a quote from the i-mate
ROM builds with radio versions 1.05.00 and 1.10.00 all include audio enhancements for voice calls. They also contain the improved camera driver. We are working hard to deliver these new builds to our full suite of languages.
indicates PM10C, then the customer should upgrade with the North American JAM ROM Build.
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from clubimate™.
@Mashie,
i have the same problem my gprs keeps disconneting on and off... sometimes it works for a few minutes and then start disconneting.... and i have to do a soft-rest to get it to work again....... does anyone else has the same problem?? or a fix?
@alexk,
Can you hear me now? can you hear me now?
Can you hear me now?
lool love those ads
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Where can we find this radio version? Can somebody post a link to it? Thanks
PapaDocta said:
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Click to expand...
Click to collapse
PapaDocta, how did you install it?
Do the usual, unzip and delete all .nbf's except radio.nbf?
Or is it more complicated?
thks all for sharing experiences, just managed to upgrade (only) radio rom to 1.10 (the JAM USA one). I used all the files except the NK_ , the ms_ and maupgradeut which I replaced with the maupgradeut_NOID that I downloaded from the ftp. USB connection in Activesync was disabled and I put my mini in bootloader mode before the upgrade...... and it went smoothly.
My network is also 900 and it works just fine.
Signal strength, comparing to 1.05 is the same, only it seems that the GPRS icon is always shown (when it's available) which was not the case with 1.05
here ya go... and my way of upgrading was i didn't disable anything just run the maupgradeut_NOID once and the device went into the bootloader mode and i got the country error i ignored it and run maupgradeut_NOID again without resting the device.. and all worked but i advice using the above steps cuz it has been tested before...... here is the files you requested and i renamed the maupgradeut_NOID to maupgradeut so don't panic ;-)
enjoy
Thanks a TON for this! I installed on my S100 and the GPRS now works perfectly. I can connect and disconnect without having to turn flight mode off/on.
-Mashie
Thanks man. Upgraded and working fine!!!!
Amaro
amaro_dj said:
Thanks man. Upgraded and working fine!!!!
Amaro
Click to expand...
Click to collapse
Hi,
I have started my uograde 10 minutes ago but it seem to be freezed...... :shock:
what I should do now?
thanks
fausto
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Mashie said:
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Click to expand...
Click to collapse
Wow, thanks Mashie for help. Now I have stopped the upgrade, I have restarted it and it seems to work, now there is a progress bar about at 50%.........hope to continue good......... :roll:
bye
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Artosoft said:
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Click to expand...
Click to collapse
if you want u can just backup ur data... cuz afte u upgrade the device will auto hard rest.... and you can use it on O2 XDAII mini shouldn't be a problem.....
if you don't have problems with ur current radio then don't upgrade... if you just curious then go for it.
good luck
Thanks papadocta.
Well, I am curius :lol:
Beside, I hope 1 extra bar signal strength (that reported by those upgraded to 1.05.0 WWE and 1.10.0 USA) will save my O2 XDA II mini's battery longer.
Is it correct that 1.10.0 USA is newer than 1.05.0 WWE? Because I read somewhere is not always true. Anyone can confirm?
Thanks again.
Best regards,
Arto
hello, i've got problem with network or gsm modul or also with soft,
i have updateg radio from 1.12.10 to 1.13.10 because i thought that earlier ver had a bug and my phone lost net due this. With new radio rom it has lost net 3 times during one day yet. Is there someone who knows how to resolve this problem it's become stressfull for me... grrrr
<edit>
i found somethig more, after it has lost net it looks like fine and you can't see any diferences (there is still some bars indicates network range, led is blinking) but you can't perform any connections... phone also is not able to answer call
i'am traying to find when it hapen or after what but help me please
<edited>
BR
Rafal
Please tell us your make of wizard and the rom, maybe a whole rom upgrade will solve your problems.
hi!,
my wizard it's a mda from era (polish t mobile)
ver 1.6.2.8 PLK
date 11/1/05
radio 1.13.10
protocol 4.0.13.24
extend 1.6.2.116
and one thing more, after ended gprs connection i can see restart of gsm, bars are blinking and it log on to net again without requesting pin code, but the problem is i can't make call and answer after soft reset everything backs good
Can suggest using a more up to date rom, not sure if there is a newer PLK rom, but what about a WWE rom?
ok i'll try this but let me know if i can find it on XDA ftp? and which one is it
i have got this phone 2 weeks ago and i still try to lern sth new about it
merci beacoup for Your help
Try the polish t-mobile web site first to see if they have any updated plk roms.
If not most mda users here are using qtek rom ftp://xda:[email protected]_2170702_21707102_20710_QTEK_WWE_Ship.exe
Download above rom, user name xda password xda
Backup all important information as everything will be lost.
Unlock device - super cid is best get unlocker from here and follow instructions http://forum.xda-developers.com/viewtopic.php?t=33796
After unlocking flash device with above rom via activesync
Hope that helps
The behaviour of disconnecting from the network and reconnecting without asking for PIN sounds familiar to me.
I think it is caused by bad connections to the SIM.
I have a dual sim and afterhaving modified it too much i my sims did not make good contact. It occurred more than once that my phone switched sims without me having 'said'to do so (switchin sims is done by powering off/on radio wich looks a bit the same to the dual sim adapter as fawlty contacts).
Advice; clean the contacts of both sim and phone before you upgrade (although I can recommend an upgrade to aku 2 roms)
i had upgrated to this one - prodigy......WWE_ship from xda ftp and now i'm waiting for problems maybe there will be no problems ...
big thanks to Those of You that answer my questions ... thx
I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
test67 said:
I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
Click to expand...
Click to collapse
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
boz said:
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
Click to expand...
Click to collapse
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
test67 said:
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
Click to expand...
Click to collapse
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
boz said:
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
Click to expand...
Click to collapse
looks like the problem is with T Mobile in my area, but thanks for the help !
im having trouble with my jasjam . out of the blue the Phone function doesnt work anymore ....... i cant find any signal with my vodafone server ...
but i can put my sim into my other jasjam and it works .....
please help someone
Go to Start>Settings>System>Device Information. What radio rom do you have?
If it says "No GSM" then you have a problem....
Cheers...
radio version 1.20.31.10
i just updated the OS to windows 6.1 Diamond (full) today and didnt change a thing
any help would be great
thanks bud
You need to download a radio only rom. I use 1.54.30.10 on Telstra n Oz. Depending where you are situated and what telco you use depends on what might be the best radio for you. People seem to like the 1.56.70.11 radio but it is still being tested and I don't really like it where I am - reception loss and battery drain... Tell us where you are, we know you're on Vodafone as per your 1st post. You should be able to find the radio roms pretty quick with a search using "radio rom hermes" as the search words.
Cheers...
Hi,
Look's like I made problem at start, I have Spanish vodafone version of Mini and I wanted to change language to English and I made mistake, I flashed factory radio with official (you can see that on htc web page) radio rom, but I didn't see this radio is for every version except this one I have. Is there any solution to downgrade-change radio to some working one again with SSPL_mini without HSPL?
Now I don't have GSM signal on phone at all, wifi is ok. Or is there any other radio rom to download because I can't find any.
robertsu said:
Hi,
Look's like I made problem at start, I have Spanish vodafone version of Mini and I wanted to change language to English and I made mistake, I flashed factory radio with official (you can see that on htc web page) radio rom, but I didn't see this radio is for every version except this one I have. Is there any solution to downgrade-change radio to some working one again with SSPL_mini without HSPL?
Now I don't have GSM signal on phone at all, wifi is ok. Or is there any other radio rom to download because I can't find any.
Click to expand...
Click to collapse
Just flash your device to a stock ROM with a correct radio via SSPL I think that would help
probably but I can't find nowhere Spain Vodafone original rom
I silved problem
btw, here is patch for Vodafone hd mini Radio.
may be someone will need this too.
http://devicehelp.vodafone.co.uk/upgrades/PHO_03774_Hotfix_20100813.zip
The RUU_PHO3774_20100813.exe & PHO03774.exe file fix Photon issue. Please refer as blow:
Photon #3774 : [Hotfix require for Vodafone] UL audio lost during call.
installation:
-Run RUU_PHO3774_20100813.exe from your PC, after flashing done phone will restart.
-When phone boot again copy from your windows to phone memory PHO03774.exe then start file browser in your mini, find PHO03774.exe and run from there to upgrade and finish radio fix.
-Restart phone again.