Related
hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/
audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?
:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter
ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?
this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951
When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100
Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter
Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com
I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter
Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond
audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers
ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762
tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.
have you guys tried VJVolubilis? It should work in the same manner.
V
Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.
Has anyone been able to make these headphones work with the wizard?
I have searched forums but cannot find a solution.
Hp do not have any drivers to install onto wm5 operating system.
Any help will be greatly appreciated.
you don't need drivers. Just use search to find the cab update en use them.
I've just received mine: they work perfectly!
just bought a set, Help
:?: Hello, I just bought a set of these off ebay, have t-mobile mda vario flashed with the cingular rom. I am reading your posts, but cannot figure out what you are talking about with the cab update. my device finds the hp headphones just fine, but there is no usage choices listed,how do I get these things to work? is there an install file I can download? Please help.
HasC,
I've got the Logitech one and they are the same as HP.
Power of the headphones and keep pressing the power button until the led flashes red.
Then you can connect it to the wizzard with the usual 0000 pin.
Did it with mine and it works.
Cheers,
Drifter
thanks for reply, but pairing not the problem
Hello, they paired just fine with the wizard, but how do I tell the wizard to play the audio through the headphones and not the internal speaker?
Drifter, you the man!!!
Mine is working beautifully now, your instruction to wait for red light to flash solved the problem.
Thanx
totally confused now???
Hello again, They are paired, but there is nothing listed in "Services to use from this device" List, is there some software or driver I need to install? is there some menu choice I need to select somewere. Please help.
jappetto,
I am also using the cingular ROM, all I did to make them work was to follow Drifter's example on pairing them. Once they were paired it just worked straight off any audio player that I used, eg Mort player or windows media player, WM allows me to forward tracks as well.
I really dont know why you are having trouble, try removing all bluetooth paired devices from your phone and pair the headphones first. This may help
Still confused
"cab update en" sounds like software I need to download. am I using the wrong rom?
tried deleting all and pairing headphones first.
sees them but there is no services listed to use. how do you tell media player to play through headphones? does it happen automatically when you turn yours on? or is there a button or command I am missing?
read all about the A2DP update in the Tornado forum as well as the A2DP threads here before you start to use your headsets. You will need A2DP to make these awsome HP headphones work to their fullest abilities.
Japetto,
I am using this ROM:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
It has A2DP settings configured already.
When you pair the headphones with this ROM installed, make sure your volume is not on silent on phone (should adjust automatically) when using headphones. If you are using WM player and cannot hear sound through headphones, press round connect button between the volume and track forward/reverse buttons ( the same one used to pair the headphones). this should establish a link with the headphones and start working.
No other software/drivers are needed to make them work.
Hope this helps.
ive got the normal tmobile uk rom...would it work??
what its the quality of sound from the headphones...when compared to the headphones given with the MDA Vario
also could someone direct me to a link where i can buy them from
Thanks
I'll Try it
thank you HasC
SBouri,
No, you need to change ROM so that it is A2DP compliant, at present t-mobile have no ROMS for this, mine was originally T-mobile ROM.
The quality of the headphones are fantastic, they are better than vario supplied ones because they are wireless and I have had the phone upstairs and was able to listen from kitchen downstairs, occasionally there was some interference, but close range, worked seamlessly for me.
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
SBouri said:
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
Click to expand...
Click to collapse
You don't ned to upgrade your rom to get your stock Tmobile MDA to work with BT stereo headsets!
Just install the A2DP hack.cab found in this thread http://forum.xda-developers.com/viewtopic.php?t=48535&highlight=a2dp and your stereo headset should show all options for Handsfree, Headset and Wireless Stereo.
I have not upgraded my rom, as I agree with SBour, I *can* do it but it's not worth it to me just yet....
I am using the stock Tmobile Rom, the A2DP hack and I-Tech Clip s35 stereo headset. The sound is lound and crystal clear.
Jaidnoire, nice one mate, will give it a go and ill order the headphones asap...i found a site through kelkoo for £48...is that cheap compared to any other sites you may know of?
Can anyone tell me what the battery life is on the Motorola HT820? As i manily want to listen to MP3s of my Vario
The HT820 manual claims 14 hours for music listening or 17 hours talk time.
Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?
yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull
I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.
usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING
Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?
Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....
I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?
Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC
Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!
THANX for the CAB file
REaly thank you for the cab file works gr8.......................................
Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!
thanks
hi this is the first time i am using this site hope it works
I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.
Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]
THANX for the CAB file
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem
This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work
anyone got this working on the tytn
I use it with a Jabra BT250...
it used to work with my plantronics 320 on the wizard but wont work on the tytn is there any special settings you had to do
I also tried to make it works and it doesn't I assume that is due to the different headset plug.
Waiting for a version for TYTN
the prog will open a connection to the earpiece i can hear the static just wont forward any of the audio to it. works with the phone of course for making calls
I have the same problem with my Tytn (BTaudio seems to work because it stops the radio - I use it with a parrot car kit) but the audio still goes through the phone speaker...
did you find a solution?
gb
BTAudio On does not work, you have to turn it on via button press on the headset. BT Off works fine of course...
Rather annoying, but that's the way it is...
Sorry but I am afraid not to understand... the bt car kit is working properly and is paired to the qtek
could you please be more specific?
thks!
Sorry, you stepped into a rather cryptic response... I assumed you were talking about the file BTAudioOn.exe that worked on the 8125 but not the 8525/TYTN.
Search this forum for mono audio - there's a big thread. Also check the wiki.
attached. This cabs works great. To activate it, start playin music, then push and hold the button on your BT headset for about 1 second, it should beep and then music comes through. Only problem is you can't use MS VC through your headset, but it doesn't break VC.
BTaudio cab works
I have used the Gotland cab file and still had problems, until I began to think like a technician... Once I installed the cab file, I performed a soft reset and then repaired my Jabra JX10... It has been working fine ever since... I can hear music (either streaming or static) and voice... I have not tried tackling the voice commander problem though...
I have just upgraded the firmware on my headset using the software that is not posted on Jabra's site, but through a link in another post, I was able to do it... had to reinstall the Gotland cab again though.... May tackle Voice Commander later in the day... Who knows...
I'm using Bluemusic 2.0 and it worked with music to BT headset. Also using installed the BT VC fix cab in this forum at it worked fine with VC 1.6 - except incoming anouncements. ( Installation Hint: after installed both - you must delete existing device and then re-pairing the BT again).
I just made a thread, here http://forum.xda-developers.com/showthread.php?t=306363
Hello,
i have the same prop like many other Leo Owners. I set Audio over Bluetooth, first time it works, after shut down the sound comes via the Phonespeaker no more chance anymore to change it. Except after hardreset but than the same, it works so long you dont shut down the phone.
Same Prop with Voice Command, Cyberon, Vito the sound goes over the Systemspeaker, i had read all Threads no solution works.
I have the origin newest Vodafone German Rom 1.66 are there any knowing reghacks to fix it.
Thank's a lot Ingo
Have you tried going to the settings > Bluetooth and activate stereo audio there?
When you first link your bluetooth headset and your phone, it automatically connects both, but after you power down either bluetooth connection or the headset, you have to manually connect the stereo autio.
re
i have only a point where i can set play systemsounds on the bluetooth device or remote device and this is always activated.
re
The same with this post:
Spizella said:
Maybe?
I didn't made any test!!!
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"="OEMAGW.dll"
"Capability"=dword:65
"ConnectHFOnCall"=dword:1
Used this CAB, now the button is working. Only one step is missing
http://forum.xda-developers.com/showpost.php?p=1282191&postcount=28
Voice command accepts voice commands on the phone after long hold on headset button! Anyone get this to announce over their bluetooth headset please let us know how you did it or if there is another version out there please post a link.
Click to expand...
Click to collapse
it's absolut mystery first time after install it works. closed bluetooth or shutdown the device thereafter no more like all other over the speaker not over the headset.
see my post: http://forum.xda-developers.com/showthread.php?t=671015