Just got my hands on an XDA Exec, but I am having trouble with the usb connection
It charges ok via usb cable or ac adapter so I guess the port works ok.. however when I plug it into a pc (I have tried 2 x Vista machines, 1 x XP & 1 x Win2k) the device is not connected. There is no usb detected noise from windows.
I forced it into the bootloader mode, soft reset and it briefly showed in windows as "USB Device Not Recognised" and then disconnected again. I have searched here and google but havent found anything as yet... anyone able to help or point me in the right direction?
I have accurately problem. I have not contact in USB and press a always button. I transferred QTEK 9000 in Serial mode and put USB cable. press all button, after that QTEK 9000 in USB mode and USB correct.
Sorry, I dont understand what you are getting at.
Interestingly, the STK service program starts automatically and sends a couple of sms's by itself. I only just purchased the sim card but havent activated it yet. I get decent signal strength
Could these symptoms be from a bad flash?
Related
I get a rather frustrating mesaage when I connect my O2 Exec via the USB port. It takes about 3 time before the connection with the comp finally happen.
The message is - 'USB Device not recognised' ' One of the USB devices has malfunctioned ........'.
Does anybody else have this problem and can anybody help?
Yep
I get the same problem but only with one PC. It happens on either USB port and is not helped by adding a USB hub. As such i am investigating the problem as if it is PC based.
Is this with ActiveSync or CardExport? Either way try rebooting PC first, wait for it to finish loading Windows. Power off your Universal, connect cable to Universal and PC then power on Universal. Seems to work okay for me. If you are using CardExport, remember you can't change modes while connected.
Regards
I have an O2 xda mini and that connects first time every time.
Found it strange that the Exec did not do same!
I have this on one PC - make sure the XDA is turned off first. Then plug the USB cable in and it should power up by itself and get recognised by the PC.
Also make sure you are using the very latest ActivSync (4.1 I believe).
Thanks lads - connect the cable while the Exec was off and it cobnnects first time. Good stuff!!
Why is that?
I think its the phone not the pc that is at fault, as i had a usb car charger and a usb power charger, both using a standard usb lead and the same fault applies, obviously just charging, AS wouldnt happen would it lol.
me missus just got a wizard and none of these faults occur on it
I concur that the plugging in USB while Uni is switched off is much more successful. Can I check with you guys - can you activesync by USB while bluetooth is on? I've not been successful with that.
V
I have read a no. of posts regarding the subject problem but found no solution. My O2 Exec is not connecting to PC with USB. Even in Bootloader, it shows usb on top when connected to the cable but is not detectable to even MaUpgradeUt_noID.
One other thing is that when its connected to PC through USB and switched on, it stop the charging and only resumes if switched off again.
Can any body tell me how to know whether USB port is working properly and solve this problem.
Hello,
Its been few months now that I have this issue, and wasn't able to solve it yet
Every time I connect my TyTN/ Hermes on the USB port of my laptop it causes a n immediate reboot. Even when the Laptop starts again when the usb ports are reactivated (the Hermes is still plugged-in) it reboots again and again ...
This is very inconvenient (...) I would say because I can neither Sync (Activesync 4.5) nor recharge my TyTN through the USB port. Even if I disable communications on activesync it does the same ...
Any ideas? anyone had similar issues?
Thanks a lot
Christoforos [Greece]
yasou christoforos,
what happens when you plug in other USB devices, like a portable storage device or a mouse or something? Something could be wrong with your motherboard or hopefully just the OS. What model laptop is it?
I have a HTC TOUCH HD, I can not connect all'Active Sync, I tried several computers but I do not recognize the smartphone anywhere. When you restart the HTC so provisional bottom line on the white seems to me not written but Serial USB, the device to a USB seems my friend, I think that is the problem, someone help me know?
First of all have you ever been able to use the USB port on your phone to sync. If yes then it is possible a setting has changed. Go to Start><Settings>Connections and USB to PC. There is a tickbox for Faster Data, Try both ticking and unticking the box. If this does not work then i would Start with uninstalling and reinstalling Active sync for XP and WMDC if you are on Vista.
If this Fails then try Hard Resetting your phone to see if this helps at all. If you have never been able to USB it i possble there is a fault on the Port. Also does the phone charge? this uses the USB and if it does not charge then you know you have a fault.
tnx
The phone is charging when the battery is not fully discharged.
If the battery is discharged only half does not load, it's something very strange.
Then I noticed that pressing Power button down and you start your phone in foil and colored ce SERIAL written while on the phone to my friend's USB ce, this could be the problem?
Before working with usb port
UP
Uppppppppppppppppppppppppp
it's very likely the USB port is damaged
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
1. Enable USB Debugging in developer options
2. Download and install ASUS USB Driver from asus website like below. Search for ASUS_Android_USB_drivers_for_Windows
www+asus+com-in-Phone-ZenFone_5_A502CG-HelpDesk_Download
i am newbie, replace + with . & - with /
james11705 said:
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
Click to expand...
Click to collapse
Sir I've tried debugging thing already and set the option to MTP. I've run troubleshooter too but windows couldn't identify and solve the problem. I'm guessing the problem is with windows 10. So I've decided to installed windows 7 in a different drive. Maybe that'll solve the problem.
Phone is running on Oreo.
Note:- I think micro usb has four pins. One among them might be a ground pin. One must be for charging and other must be to transfer data. Correct me if I'm wrong.
I had several times repairing phone with broken micro usb connector, it has 5 pin to be soldering on it. 2 for the power and 3 for data transfer. If the cable is fine for other devices then maybe the problem is not from the cable itself. I had an experience like that case before that if the notification from the pc says connected device is malfunctioned, that may caused by when u first time connected the phone to the pc, the device is disconnected when it still trying to instal the driver. When u connected the phone to pc check on the device manager, if u see "!" icon there, then theres the problem, ur phone driver not installed properly, u can try manual instal of device driver from there.
Last usb device you connected malfunctioned. Windows does not recognise it
"USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it” always appears in Windows 10 and Windows 8.
And the reasons for the issue contains:
The currently loaded USB driver has become corrupted or unstable
USB drivers need to be updated
USB drive may be entering selective suspend
USB has some damaged files or bad sectors
USB drive has not been formatted correctly
For different reasons, you need to take different measure, but you can directly format it via AOMEI Partition Assistant to solve the usb device not recognize issue.
The USB port itself was damaged. So I got replacement and now the new phone works fine with same laptop. Thanks you all for your replies.