Database Users

P3300 not restarting after upgrade

Hello Team,
My P3300 is stopped on start screen (IPL, SPL, GSM, OS...) with HTC picture and is not starting anymore...
I tried the WM6 upgrade and i don't know how to restart it from my old ROm or the new one.
Please Help
Many Thanks

Many of Us have been in your spot here is a good start for you, but the answer is read read read, many topics like yours and alot of people have grown tired of the same posts daily, just trying to keep you from getting the wrath of the few that sit and wait for such a thread to start
http://forum.xda-developers.com/showthread.php?t=311650
and good luck, post with your questions and I will do what I can to help, but it boils down to
Use the original rom/USPL/New Rom
http://forum.xda-developers.com/showthread.php?t=311479 Read this entire thread if you have the patients, I wish I would have saved the links for a future reference, but these two links will get you going where you need to go

Hi Morpheus022
I'm having the same problem.
I will let you know when I have something.
If you have a solution first let me know also.

did you gave the device a hard reset?
may it's stuck in the loader and if you give the device a hard reset he will start up normaly

pvdhelm said:
did you gave the device a hard reset?
may it's stuck in the loader and if you give the device a hard reset he will start up normaly
Click to expand...
Click to collapse
I did it but nothing change. Nothing is running

Can't upgrade to WWE from German P4350

Hi all!
I just got my HTC P4350 today (I bought it in Germany). It is a HTC band, not any O2, T-mobile or Vodaphone. However, it has a German OS came along (WM5 as written on the case).
I checked the forums and found this:
http://forum.xda-developers.com/showthread.php?t=286873&page=3
Downloaded the last WEE Rom and tried to upgrade, but I got the error message which says:
ERROR [294] : INVALID VENDOR ID
This Update Utility cannot be used for your PDA Phone. Please check your Upgrade Utility.
HUEbc669-HFTD55670-HUEbc568-HFTD55670
Then click "Exit" to quit.
Could anyone tell me if it's possible to change my OS to English? And if yes, how can I do it?
Many thanks to all!

Any help? @[email protected]

No - because it is ALL explained in several threads here in the Forum. So please read.

There is so much info about this topic already (we're thrown dead by it) by the way back from holidays

papamopps said:
No - because it is ALL explained in several threads here in the Forum. So please read.
Click to expand...
Click to collapse
I checked about 20 topics before posting mine, and couldnt find the information I need.
I dont know much about these PDA, either browse the forums too often as you can see. But thanks anyway for your kindness. I will try to look for more topics.

fyllu said:
I checked about 20 topics before posting mine, and couldnt find the information I need.
I dont know much about these PDA, either browse the forums too often as you can see. But thanks anyway for your kindness. I will try to look for more topics.
Click to expand...
Click to collapse
lol - no matter.
perhaps you search for:
CID-unlock
RUU
WM6 roms
etc.
all discussed many times.
BUT: you cannot flash a german Herald with an english rom without unlocking.
Herefor you can use imei.check.uk - but it cost.
@dutchman - welcome back. you haven´t missed anything.

papamopps said:
lol - no matter.
@dutchman - welcome back. you haven´t missed anything.
Click to expand...
Click to collapse
Yeah i see Well not that I expected so... especially not from HTC! But sometimes miracles happen lol

hi
think is the best way
i paid at imei.check.uk and received unlock instruction in 3 minutes , later i flash with programs from wiki site
thx god now i have english in herald )

Hello,
I have similar problems with a German Vodafone device.
Does anybody have any experience with MyLanguage (http://www.mylanguage.mobi)? As far as I can tell this would be sufficient for me to have an English speaking Herald.
Thanks for your ideas!
best regards,
mzperx

please help total thicko

please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil

Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB

hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil

got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone

Is your HD2 branded? (bought it in combination with a contract?)

hi mate its on vodafone contract buts its not branded.

Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB

hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated

OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB

Qtek 9000 Boot problems

First, I am very sorry, that I open a new thread, but forum system doesn't allow to me to reply to one's post.
Following is a quotation (part) from a senior member:
orb3000 said:
http://forum.xda-developers.com/showthread.php?t=567017
I´m sure you´ll find your way there
Click to expand...
Click to collapse
Hello thanks for your fast answer.
But I still don't know what I need for re-install.
Do I need a hardsplash? (what is hardsplash?)
Do I have to flash a rom in vista? (What is "flash a rom"?)
What is "kitchen"?
Which link should I click to get a solution? I cannot click on hundreds of links...
Thanks.

Hi
As mentioned before have a deep read of the WIKI page this will give you detailed information with regards to USPL, Flashing and recovery after failed flashes.
You'll find it here
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

Hi,
I understand that getting all the terms clear can be hard, but it´s really easy to install another operating system (ROM)
I´m answering inside your quote in red, and also giving you another link to the most comprehensible thread to install:
http://forum.xda-developers.com/showthread.php?t=269118&highlight=windows+mobile
Also in the Wiki you can find most of your questions
Good luck,
ccolucci said:
First, I am very sorry, that I open a new thread, but forum system doesn't allow to me to reply to one's post.
Following is a quotation (part) from a senior member:
Hello thanks for your fast answer.
But I still don't know what I need for re-install.
Do I need a hardsplash? (what is hardsplash?) Instructions on the link I´m giving you above
Do I have to flash a rom in vista? (What is "flash a rom"?) Flashing a ROM means installing another version of the WM operating system, it´s easier to install a ROM on a computer with XP system, but if you don´t have it can be done also in Vista
What is "kitchen"? Don´t worry for this, you don´t need it
Which link should I click to get a solution? I cannot click on hundreds of links...
Thanks.
Click to expand...
Click to collapse

Thanks a lot for the link.
I found the solution and the necessary file(s).
It is installed. It works. I am happy.

Glad to know
Enjoy your Uni!

HELP
Hello there! im new here in the forum and i have some problems with my qtek 9000...
Let's start, but lemme tell u something, i am totally NOOB in these things so u gotta tell me step by step if u can
Okay, first of all my Qtek 9000, when i turn him on it appears the Qtek Keep the world in one Screen and the usb connect/disconnects all the time so i cant do nothing that uses usb port, after the Qtek screen it appears something in red:
R 1. 18. 00
G 42. 54. P8
D 2. 07. 00 WWE
And then it turns off...
I tryed to charge the ppc but if i put in charge, it turns on and off all the time
sometimes it appears the Windows Mobile screen too but it turns off again...
What can i do here, im totally confused... Please Help Me!

Welcome to forums
Have you tried to do a hard reset? (instructions in the wiki)
Check also your battery.
Hope it helps,

well i think its from the battery cuz it doesn't charge, when i put it to charge it stars to turn on/off all the time... and if i use the hard reset while in charge does the same thing, just turns on/off
and btw what are those things? with R, G and D (WWE means worldwide english right?)

I'd buy a new battery.

Yet another Telus S510 Bricked - Help needed

Hi guys
Really like the forum
Ok
So i've been asked to unlock a this phone as a favor
So got home after having some drinks(not the best idea) and tried unlocking it
Long story short i installed a wrong spl as i understand and now the phone stays on the splash screen
I did lots of research in the forum, allot of ppl have the same problem, but didnt find a complete answer on how to fix this
as i now understand i should first application unlock it, then hard spl and then flash custom rom
On the Bootloader it says
"cEDA100
SPL-0-39.0000
MicroP-Cedar.W(LED) v58B"
And on the bottom "Serial" witch as i now understand means its not application unlocked?
So when i try to flash it it allways stays on 0%
And as i said it stops on the htc splash screen
Tried hard resetting the first way, but nothing. Cant find the original telus rom and i dont have an htc donor to do the 3rd hard reset way
Any help would be much appreciated right now guys ASAP cause am leaving canada by 2mrw
Thanks for reading
Hope u can help

Moved to general as not rom development

Anyone?
C'mon guys xD
Give me something
^^