This is my customer set(818pro),he say want mr help him format the set.so i just press camera side two button and on off button.now totaly can not on liao,
so i take out battery and put back for try,the red and blue light is on(charging and bluetooth light),i try to press other button,when i press center button,will show me blank screen,can not see anything,just blank.what is the problem?
anyone can help me.(i have jaf for windows mobile,but i can not make bootloader)
help help
Does your device boot? If yes, you can hard reset using a tool which can be found in settings.
vlodeck said:
Does your device boot? If yes, you can hard reset using a tool which can be found in settings.
The set can not be on already,only can see the red is on,if i press canter button will see lcd blank.what can do?
If want to use power supply to on device can?
Click to expand...
Click to collapse
Related
can anybody help me..my atom now is dead cannot turn on after upgrading.i use turn off+camera+reset aslo no responde..any solutions bro?
Redtabs said:
can anybody help me..my atom now is dead cannot turn on after upgrading.i use turn off+camera+reset aslo no responde..any solutions bro?
Click to expand...
Click to collapse
take out your battery, and press turn off+camera+reset, can see the bootloader mode back?? see WIKI for more detail.
chartreux said:
take out your battery, and press turn off+camera+reset, can see the bootloader mode back?? see WIKI for more detail.
Click to expand...
Click to collapse
try already bro..but no responde.any other way?
try already bro.but no responde..any other way?
Redtabs said:
can anybody help me..my atom now is dead cannot turn on after upgrading.i use turn off+camera+reset aslo no responde..any solutions bro?
Click to expand...
Click to collapse
Can you try the power button + reset + record button (not camera) if the bootloader mode will come out.
Do you see the flash light upon press on the on/off button?
also the same There's no red light power bro..
My phone got like his phone... i can't turn on .. can't do everything.. so it like die...so we need held.. so anybody can held us?
Hi there,
if when you plug the power led in there is no lights, and if the battery is fully charged then you will probably have to jtag it, it's very simple and if you look at wiki then you will also see, dead atom section with pictures and diagrams, including the software to flash the phone and hopefully get it working for you.
if my pda phone was dead coz eror upgrade firmware .. so can be back again suck as before eror upgrade??
hello
my shift does not startup when i shutdown it
snapvue work but another side does not even htc start screen does not come i mean nothing just black screen
it wont start until i plug out the battery for about 20 minute so
when put it back its start again
so can any one help me
me shift is new i buy it before 3 day
please help........
i have these prog on it
autocad , photoshop , kmplayer
, the htc update for side bar and start the readyboost only .
and now even when plug the battery vista side
show nothing (black screen ) even the under screen light just the first light
is on another does not
snapvue work normal
Have you tried erasing hard disk?
With all that programs you might have run out of space..
thanks for reply but am sure am not out of space there is alot of
space and how can i delete the hard if i cant open the vista
even the screen with htc mark does not show only black
i start feeling that shift is not good device in use i think its
tooooo sensitive
or maybe only my device
what about you guys ?
If you are not even getting the HTC boot screen on Vista side it sounds as if you have a serious hardware problem.
Have you done any hardware modifications?
If not then I urge you to return the device under Warranty.
Why not using Fn + F3 at boot time to reinstall vista?
how can i do that if the boot time does not come
only black screen
and thanks guy for reply
by the way does the shift made in china ?
You don't even see the bios messages?
I will try to imagine this can be a stupid situation. Just try this:
Push the power button for 10 seconds and see if something happens.
After that, try again to push the power button.
If it works and you see the bios, press FN+F3 and don't install too much thinks on your device.
pof said:
You don't even see the bios messages?
Click to expand...
Click to collapse
yes i see nothing
I will try to imagine this can be a stupid situation. Just try this:
Push the power button for 10 seconds and see if something happens.
After that, try again to push the power button.
If it works and you see the bios, press FN+F3 and don't install too much thinks on your device
Click to expand...
Click to collapse
you mean push for 10 sec when device on and then on it again ?
scopy60 said:
yes i see nothing
Click to expand...
Click to collapse
Then RMA it.
sorry pof but what you mean ? RMA?
http://en.wikipedia.org/wiki/Return_Merchandise_Authorization
but it start some time
If it was your car and it only run sometimes, wouldn't you return it then? Why should you act differently with a computer?? Of course you should RMA it.
And in the first post says the shift is only 3 days old, so he could claim DOA (Dead On Arrival) and get a new device.
ok
thanks pof and other guy who reply
regard ....
by the way pof how i can install xp on shift
without cd
I have the same problem but with white screento bleck screen
also I can't enter to the bios manager (Fn+F3) the only screen is the blank white screen
http://forum.xda-developers.com/showthread.php?p=2319538#post2319538
do you have a Warranty
if you have then return it on the Warranty
i think this is your only option
oh my god now am sure about bad made for shift
hi
i made a had reset for my htc blackstone but now can't calibrate touch screen it return always in the center of screen .
Any solution to skip screen calibrating
thx
flashing rom can cause this problem ??
hbstun said:
flashing rom can cause this problem ??
Click to expand...
Click to collapse
Do a Hard Reset again
ozmoran said:
Do a Hard Reset again
Click to expand...
Click to collapse
can't reset it
!!
Take the battery out. Pop it back in. Hold down both volume up and down and tap the power button (don't hold the power button down though). You should then boot into a menu where you can do a hard reset.
On a similar note though I used to look after some old Windows CE devices that would do the same thing if you clicked too far away from the cross, never tried it on my HD though!
crankshaft said:
Take the battery out. Pop it back in. Hold down both volume up and down and tap the power button (don't hold the power button down though). You should then boot into a menu where you can do a hard reset.
On a similar note though I used to look after some old Windows CE devices that would do the same thing if you clicked too far away from the cross, never tried it on my HD though!
Click to expand...
Click to collapse
there's no solution to skip align screen ??
hbstun said:
there's no solution to skip align screen ??
Click to expand...
Click to collapse
When you hard reset the device, everything is wiped on device apart from OS, so you need to align screen at start to be able to use device once automatic setup has completed.
There is another option as Throys latest roms, R6 & R7 has a complete automatic setup and there is no align screen. You could always try one of these
Try using the tool located at this thread, maybe it helps.
chitza said:
Try using the tool located at this thread, maybe it helps.
Click to expand...
Click to collapse
worked on my htc touch HD . tnx
Finally, and after a lot of web search and tries, i could discover how to make a hard reset of this chinese clon of the pharos.
it was hard for me, cause im newbie, so if someone else needs to hard reset his phone, here is the anser!
1.- enter the "Calibrating..." screen by turning the device on with the call key (green) pressed, u will see a white screen with an image of a screwdriver and a key and the "calibrating..." letters, here u can release the keys.
2.- then press both red and green keys, and without releasing, press the back "reset" button. then release the reset button, and next release the other 2 buttons.
in this step nothing seems to happen, thats why its hard to find this is the right way to hard reset this chinese device.
and thats all, your phone starts normally as the first time!
u also can do a hard reset from the windows settings, but this time my windows hanged up when loading
i also discovered that turning this device ON with the end call key (red) pressed, it enters in a white screen with an icon of a hdd with a green arrow facing down to the hdd with the "downloading..." letters under it.
i think this could be the bootloader for this device, but i dont know how to go beyond this point.
the pc cant install its drivers when i plug the usb (and in normal mode it syncs well with the ActiveSync).
maybe i should put the rom files in the SD card, but i dont know where (in wich folder) or wich files...
SO if someone knows how to flash one of this devices, please tell!!
hope someone find this util, and sorry for explaining it sooo long, english is not my mother talk, so if someone wanna translate this (and explain it shorter) feel free to do it!
Hard Reset
hello!
I also have a problem with this phone clon HTC P3470. I installed HTCHome 2.1 and since then it is restarting or freezing before I can do anything. And even with yours instructions I can't do hard reset. I think that I am doing something wrong and I beg you if you can provide me a pictures where to push, because I can't make it.
Thank you!
RE: pictures
thats the same i tryed to install, and as the htc intructions to hard reset it didnt work for that phone i thougt it was lost.
i think maybe different manufacturers build this phone, so maybe yours have a different key combination to hard reset it.
did you reach any of the "downloaing..." or "calibrating..." screens? or you didnt reach that screens neither?
i will post some pics as soon as possible to help you, but in the meantime, you can search and try different key combinations for different phones, it didnt work for me, but trying and trying i discovered this one.
i found a page with a list of the most common combinations for different phone brands and model, but i dont remember its address, just google it, maybe that helps you!
Thank you for your help!
Unfortunately I didn't get any any of the "downloading..." or "calibrating..." screens. When do I need to do hard reset - phone is off or must be on (windows are loading, after that it freezes and restarts).
"1.- enter the "Calibrating..." screen by turning the device on with the call key (green) pressed, u will see a white screen with an image of a screwdriver and a key and the "calibrating..." letters, here u can release the keys." I can't turn on my device with call key, only with power key. And (sorry) but I didn't find reset button, thats why I would like see pictures.
I will try more combos.
Thank you for now!
story goes like this, it was windows mobile 6.1 in the first place, right after i flash it with some new ROM..it turns into blinking green screen says " Tis operation will delete all your personal data, and reset all settings to manufacturer default. Press action to restore manufacturer default or press other keys to cancel..so i end up pressing the action button....then guess what..?? NOTHING happen... Can somebody plss help me with this...i really3x appreciate ur help....Thank u...
i got cha
i tried things for months but i found this one guy who had the answer.. what you have to do is. press and hold the SEND and the END buttons, plus get the stylus and push the reset button you should hold it until some restart screen comes up. i hope everything goes good
hard reset is: send and end together and soft reset button
could be potentially a bad flash- try a reflash and see what happens
ajis9981 said:
story goes like this, it was windows mobile 6.1 in the first place, right after i flash it with some new ROM..it turns into blinking green screen says " Tis operation will delete all your personal data, and reset all settings to manufacturer default. Press action to restore manufacturer default or press other keys to cancel..so i end up pressing the action button....then guess what..?? NOTHING happen... Can somebody plss help me with this...i really3x appreciate ur help....Thank u...
Click to expand...
Click to collapse
Soft reset the device and let it boot completely. Once you are in WM, try to use the button and see if it works, as it could be that the button is busted.