Related
Done a search on various site but still no joy.
Just got a o2 XDA Mini S yesterday.But I cannot get it to connect to my wireless network at home.Its an open network, with a laptop,3 PC's,2 xbox's accessing it various times of day.All connect no problem.
My xda says my network is available,but cannot connect to it. Do I need to put in IP addresses in manually ? On the network cards section, it the SDIO WLAN wireless adapter that is used ?
Have tried allsorts,
First Question,
Is your WiFi router set to DHCP mode. If so then check that your device is also set to DHCP mode. If not change router to DHCP check that all your other devices are set to DHCP then you should automatically be allocated an IP address. A useful utility is WiFi Companion.
This scans for available networks and allows you to connect. it will also show you the IP address you have been assigned.
You could assign an IP address manually but this will have to be changed every time you walk on to another network. DHCP is better.
Regrads
Thanks for the info DW, it is my router,popped round a mates last night and it connected to his network ok.
Will check what you said and the firewall
not sure by what you mean exactly by open network.
but are you using MAC address filtering?
when I got the Sony Laptop, I was so eager to get it all setup etc, that I forgot bout the filtering, it would see the network, but refused to connect.
I'm having the same problem. My Exec can see the network but not connect. I investigated it a bit more and for some reason it keeps trying to use the same IP address as my laptop. It also cannot connect to the net to update Avant Go when it's syncing (via my laptop).
I've tried connecting with all other devices switched off, to avoid the IP address conflict, but still cannot connect to the internet.
I'm pretty much stumped.
Setting the Wireless power setting for best performance was the trump for me.
On my Vario - Settings - Connections - Wireless LAN - Power Mode
Thanks for the suggestion. I gave it a try but unfortunately it didn't help.
If my laptop is switched off my Exec can connect to my D-Link router, but I cannot access any internet resources. I presume that somewhere in the settings is the solution but I can't find it.
EXCELLENT db44!!!
For some reasons setting wireless "best performance" wortked for me too. Wizard (QTEK 9100 - gray market I guess as QTEK did not register on their site for me). I will still try Opera too.
Kind regards,
Oleg.
www.nano-science.com
same thing happened to my qtek. it detected the network but could not connect and sometimes when it got connected, i still couldn't surf the net. is there anything in the settings that i'm missing? i also tried to enter the IP address manually but no luck either.
My O2 XDA Mini arrived yesterday. It sees my wireless network (as well as two others in my neighborhood) but cannot/will not connect. I've tried everything I've read above - which confirms I'm on the right trail, but...
The D-Link DI-624 wireless router is in DCHP mode. I've dropped all security for connection trials. I've put the MAC address of the XDA in the router, just in case. I cannot find the IP address of the Mini (how do you do that?), but have tried with and without allowing the router to assign it a random and an assigned IP address. My router does NOT have the default (198.162, etc, etc IP address.) so I've been careful not to blindly follow standard instructions. Of course, I have tried with specific IP addresses, default gateway (router), etc, etc.
One clue is that after trying for a long time to connect to the networks it finds, I got one error message from the XDA saying it could not be assigned an IP address from the network(s). Good clue - wish I know what it means.
There are only limited settings to check on the XDA, so I'm wondering if I'm missing something on the router. Any ideas? Many thanks.
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
HELP ME
Someone can help me?!
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris
I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?
Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!
got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is
gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy
Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers
tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.
New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.
If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me
Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469
@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]
Howdy guys.
I cant get access to wireless internet in my house anymore since we secured the network by only allowing certain mac addresses.
Any idea how I can find the MAC address of the M600 ?
Cheers
(Switch on WiFi using the button on the side of the device. Then go to Settings - Wifi settings.
Go to "Advanced" and you'll see the MAC entry. It only shows up if the WiFi is on.)
Click to expand...
Click to collapse
it has to be connected to a network as well as on.
I'll give it a shot many thanks
I'm not sure if I'm doing something wrong, but I can't seem to share my internet from my vogue.
I'm pretty sure its a mac problem, not the phone. I open ICS on the vogue and hit connect.
On the mac in network I click bluetooth and click connect. It starts to connect then i simply get 'a modem error has occurred.' On the mac in network and in bluetooth the configuration says "default" and I have left the Telephone, account name, and password field blank. The phone has been paired with the mac already so that isn't the problem.
Am I don't something wrong? Should it not be setup as a telephone modem. I was under the assumption we didn't need to mess with any of the settings in network.
Thanks in advance.
It always seems to work with my mac, make sure you are connecting to the phones network and not using the phone as modem. You shouldn't have to put any info on the mac. Make sure your connected by right clicking on the BT icon by the clock.
Browse the device to make sure you have a good connection.
Then right click again to and select connect to network.
Make sure you have your airport off.
Thanks for the response, I repaired and now it connects however it won't load any webpages on the mac. In Network it says 'self assigned ip' and there is a 169. ip address.
On the vogue i have ICS connected.
Am I missing a step?
Hi everyone,
I would like to connect to my laptop next room from local network. I can connect perfectly when I type in my IP address into the first textbox (Computer), but I can't connect when I type in my Computer Name (full computer name) instead. I tried MyPCName as Computer, \\MyPCName as Computer, forwarding port 3389 to my IP, leaving domain name empty, putting in my workgroup name as a domain, putting in my computer name as a domain, putting in myPCName\MyUserName as Username, \\MyPCName as Computer, still the same. It won't connect unless I put in the IP address. I would like to do this since my workplace assigns a different IP to my laptop then I assign at home, but naturally I have the same computer name at both places, so I would like to have a permanent setting for both places.
I'm running Windows 7 64 bit on my laptop and 1.66.405.2 ROM on my HTC HD2.
Many thanks in advance.
can you connect to it ok using another computer? might be a dns issue at a guess...
I can connect from other computers fine. Also on my HD2 I can see the host names of PC's under Resco Explorer and map them. However, remote desktop mobile refuses to work with the Computer Name. I can ping my Laptop's IP and also Computer name from pingbox2. Only in Remote Desktop Mobile there is a problem.
windows 7 by default blocks remote desktop connections from different versions of remote desktop. if you right click computer and select properties, then choose remote settings on the right hand side and select the middle option (accept connections from all verions of remote desktop). havent tried this my self but it solves most issues when using different versions of windows
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. If I don't disable 3G, I can only connect with IP and not computer name. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
For me it works with MyPCName in computer and empty domain, both for XP and 7.
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
ozkaya said:
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
Click to expand...
Click to collapse
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
tomallen35 said:
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
Click to expand...
Click to collapse
I think you're right, when the 3G is on (and also Wifi on), Resco shows computers from all around the country when I click computers near me and not my local network. When only wifi is on I can see my local computers. 3G probably has precedence over Wifi? How can I correct this?
samsamuel said:
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
Click to expand...
Click to collapse
But the 66.whatever address is generic openDNS lookup IP and same for everyone. Are you suggesting me to route this IP to my local IP, i.e. 192.168.x.x? Oh, one more thing, I can also connect when 3g and wifi are both on, but only through computer's IP and not computer name. Can you connect with computer name while both are on and connected?
when your phone does a dns lookup on the name it resolves to the open dns assigned address (not the same for everyone, otherwise the open fns system wouldn't work) so to connect to your computer the phone sends its request to open dns who forward that request to your current actual address.at home that address is your home ip address BUT it isn't your laptops address it is your routers address.(stop reading here if you don't have a router).
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
samsamuel said:
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
Click to expand...
Click to collapse
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
kilrah said:
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
Click to expand...
Click to collapse
you're totally right, I have a router and its port is forwarded to my laptop IP, but this is only good (and works well too) when I want to connect from Internet to my local network. I tried OpenDNS exceptions for VPN and defined an exception named as MyComputerName but it didn't work. Then I tried a dyndns solution, but it only works for external connections and not local network, i.e. it can't map local IP's. What I need is a dynamic client which can update my local IP.
I also tried to edit hosts entry in the registry with MyComputerName. It works for a single IP, but I'm not sure if I can write multiple IP adresses (my work and home local IP) into that. If I could maybe everything would be OK.
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
kilrah said:
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
Click to expand...
Click to collapse
thank you very much for your time, I appreciate it. You're right in that waiting a bit resolves the issue (it's a bit more than 30 secs for me that's why I thought it wasn't working when 3G is enabled) but only when OpenDNS is not used. I assume you don't use OpenDNS, right? Once I put that one into equation, it takes over NetBIOS protocol and returns its IP instead of the local IP(192.168.x.x). As far as I understand, DNS lookup has precedence over NETBIOS and if the name is not found in DNS it consults NETBIOS protocol. However OpenDNS has this nice "feature" where it finds the name with its own IP. There are several posts about this on its webpage and they say to either disable the typo correction or put exceptions for Netbios names, but sadly none of them works for me right now.
Nope, no OpenDNS, never actually heard of it.
How does it work? Do you enter their DNS server address in the network settings of your pc/phone, or is it an app you run?
you click Start/Settings/All Settings/Connections/Wifi/First Button/Switch to Network Adapters tab/Select Broadcom 802.11 DHD Network Adapter/Switch to Name Servers Tab/Type in 208.67.222.222 for primary DNS and 208.67.220.220 for secondary DNS, click OK. that's all. Could you try if it's not so much trouble? Thanks.
OK, remote desktop doesn't work either with the OpenDNS servers in.
I'm pretty sure it must be a limitation of the remote desktop app itself, as resco explorer can still navigate and/or discover the network shares of my other PCs with no problem. NBTStatCE also finds everybody.
Wouldn't even surprise me, as that Remote desktop mobile has always been troublesome. I don't remember exactly, but in the WM5 days it was pretty much impossible to use on a local network due to a weird handling of names... if I remember well all "local" (NetBIOS) addresses without a '.' entered in the remote desktop app would be redirected to the "Work" connection, while "remote" ones with a period would be directed on the "Internet" connection. As a network card can only be defined as one of them, if you wanted it to work in both cases through Wifi you had to switch the card from Work to Internet and back all the time. And of course when it's on Work it breaks some other things that use the default system handling like mail.