PDAVIET Wing ROM and Bluetooth Headset... - Wing, P4350 General

Greetings,
Fairly new here...got my Wing about a week ago.
I installed the PDAVIET Wing ROM with no issues (thx to everyone here on that long thread to get it going).
I have the Wing paired up with my car...no probs as the car has it's own voice recognition and simply dials the phone, etc.
My problem is this....
I have a Motorola H700 earbud. It paired no problem. Using the Wing directly, I have the right side button trigger the voice activated dialing. I than just speak and it dials whatever number I have associated. All good.
When I have my earbud on...and I press the talk button...it brings up the dial pad on the phone...NO voice recognition. I can manually press the button on the Wing...speak my number and it will dial....however that defeats the purpose of true hands-free.
When I press the call button on by earbud...how can I get the phone to jump into the voice recognition dialing instead of the regular manual keypad? I would love to be able to press the talk on my earbud...than the phone jumps to the talk mode...and I speak my saved voice dial. Otherwise, the bud is deemed useless b/c I don't want to have to touch my phone.
I hope that is all clear and that someone can help me out.
Thx in advance for any help.
PS. I went to the Bluetooth options for my H700 earbud...and the only option is what communications the earbud supports...which is only "hands-free". I was expecting a more thorough layout of earbud key mapping, etc. I thought I could trigger the voice recognition dial when I hit the talk button on the bud. None such luck.
HELP.
Cheers...B.

help...bump

I am also interested in the answer to this question. Anyone with info? Thanks!

A regedit in needed for voice dialing to work w the pdaviet rom... LaunchApEnable must be added.... somewhere... google for the issue w Voice speed dial... you'll find what you're looking for

Related

BT voice dial while in standby

Voice dialing from bluetooth works fine while my K-Jam is on, but when it goes into standby mode it doesnt work. I press the button on the headset and I get the headset beep indicating it has connected, but I never hear the speed dail beep. If I bring the K-Jam out of standby mode, I can see the speed dial program is on teh screen, but it seems stuck. Maybe any ideas?
Thanks, John
All Wizards suffer from this; currently no known way around it, hopefully a update will cure this issue or someone will find a way.
A little more digging and I have seen where others have tried to find a work around. Here is what I am doing for now. I am turning off automatic standby and using the "device lock" to keep buttons from accidentally being pushed instead of putting it in standby by pushing the power button. I am not sure what the battery usage will be now, but I will test it for awhile and see. By the way, does anyone know how I can assign one of the hard buttons to device lock? Is there an exe somewhere or can someone point me to a registry entry for this?
Thanks
haven't found keylock yet, but found "power off"
may create a short cut in programs?
My Qtek does not have this problem.
I'm using voicedial from my bluetooth headset. It works perfect even when the phone is in standby mode! It wakes up and makes the call perfectly!! I have a Qtek 9100 and a SonyEricsson HBH-662.
same here with my dopod 838 and HBH-662 it seems to work nicely even if the device is in standby. Is this because of the headset?
::adit
No problem here either...
Dutch MDA Vario + HBH-662 headset - works like a charm standby or not.
By the way... why bother installing MS Voice when the Wizard comes with it's own voice dialing utility?
lisa1982 said:
By the way... why bother installing MS Voice when the Wizard comes with it's own voice dialing utility?
Click to expand...
Click to collapse
Probably because MS Voice Command is based on speaker independent recognition. So, you don't record a voice tag for the few contacts you dial most often, you just say 'call <contact> at|on mobile|home|work' and it will try and recognise the contact from your entire list.
Also pretty cool for casually pressing the button and asking 'what appointments do I have today' and having the details and locations read out to you...
Dox
lisa1982
OEM voicedial does not allow you to dial by digits 5-5-5-1-2-3-4 etc OEM voice dial is limited to voice tags MS Voice Command allows you to dial any contact in you're list also the ability of MS VC to announce upcoming appointments etc.
There are more these are only a few examples.
Can you guys that are able to make BT calls from standbye mode post what rom etc you have installed?
Thanks, John
Question for all you guys with the SE HBH-662 headsets. Does the caller ID on the Headset work? Meaning when you get an incoming call does it scroll the phone number only or does it display the name of the contact (if you have them in your contacts)? And how is the battery life of the headset ? I've got a Motorola HS850 which I love but I'm having the same problem with voice dialling from Standby and am willing to buy another headset if it works.
Thanks.
Hi firas,
Only the number is displayed in a scrolling fashion and it has a good battery life. Highly recommended
I have the HBH-600 but dont think it would work any different with another headset. My K-Jam receives the signal, and beeps, but seems to get stuck after that. When I take it out of standbye after trying it, I see the voice app is open, but seems to be stuck. If another headset will fix the problem, I would gladly buy it.
John
techspy
My HBH-660 does the same thing as your's I may go ahead and get the HBH-662 and try it thogh, if it will fix the issue that would be great.
marka2k said:
All Wizards suffer from this; currently no known way around it, hopefully a update will cure this issue or someone will find a way.
Click to expand...
Click to collapse
One method that does work is to use the "redial" function on your headset. On my HS850 it's press and hold the call button. The Wizard _will_ wake up and start dialling your last used number. Just tap the headset button again to cancel the call, and you're ready to use Voicedail.
Initiating a redial then cancelling it to get the phone to wake up is a work around but not a fix. I hope they resolve this or if the HBH-662 does work I wonder what the difference is?
marka2k said:
Initiating a redial then cancelling it to get the phone to wake up is a work around but not a fix.
Click to expand...
Click to collapse
Thanks for your constructive input and for stating the obvious :roll: I was simply correcting your statement that there is "currently no known way around it" which is not true. All it takes is two extra button presses.
Tried my new Wizard last night with my old Plantronics M3000 bluethooth headset, Device was in stanby and when i pressed the button on the headst it woke up and voice dailed no problems.
I am using the standard T- Mobile roms with the MDA Vario as it is only a day old.
Hope this helps

Headset talk button

I can use the talk button to answer incoming calls on headset. Anybody knows a way to use that button for voice calling etc?
Hello
Just been browsing and I notice you have asked the same question as me, I did not notice it before as I searched for handsfree.
Anyway, what model do you have? I am SPV M600, I only noticed this problem today as I have just installed MP3's onto my SD card. While I had the headphones on I tried handsfree and noticed I could not activate voice dial with the button although I could answer and close calls.
On all of my old phones, I just pressed the button, it activated voice dial and I called the number, but not this phone.
I have set up voice dial on the phone, voice tagged contacts, and it is working great, none are failing to be recognised.
Have you managed to sort out the problem yet?
I called my phone supplier they could not help as they do not have a technical dept, and Orange just wont answer the phone, customer service is dreadful lately.
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Sorry I replied to the wrong thread. I dont know how to get the voice dial on the headset.
Spenner said:
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Click to expand...
Click to collapse
Hi Spenner.
When you say your headset works, does it activate the voice dial software when the silver button is pressed or does it just answer and close calls?
Voice Dial
I think it can be solved with a registry modification. Unfortunately I cannot solve the problem myself. I tried all the properities bu I couldnt find any related one.
My phone is O2 XDA and just like you I only can answer and hang up calls by headset button.
i was asking about how to change behaviour of this button, hovewer nobydy knows
I would like to push it 1,2,3 times or push & hold and assign different actions for different pushes
it all used to work beautifully on my Orange M600. Then I upgraded to the Dopod ROm and the voice speed dialler i gone.
Bloody annoying! Can't work out how to get it back...

HELP PLEASE...Your supplied handfree working? Mine is NOT.

Hello all
Can you tell me is your supplied handfree working?
I just installed some mp3's onto a new SD card, while I had the headphones on I thought I would try handsfree, it does not work.
The silver button you press to activate voice dial or answer calls does nothing, and I cannot speak into the microphone, I can only hear calls.
I have voice tabbed my contacts, voice dialing works great on the phone but not the headset. Inside the phone, the phone menu has 'Turn Hands-free On', this is greyed out. Has this feature been removed from the phone?
The phone is Orange SPV M600
Thanks
i find the button on the headset useless. 9 times out of ten it does nothing, then suddently it will end a call or open the voice prompt. I gave up and put it down to a windowsism.
Well, mine can only answer calls, it will not start voice dial and will not open the phone app. No problems with sound or mic.
I use Motorola H350 anyway so it doesn't really bother me.
Thanks
From a lot of Googling I have found nothing official even mentioning the use of the handsfree they advertise and supply. However, it would appear that this phone is only capable of answering and closing calls with handsfree, so not truly handsfree.
You still have to take out your nice new, expensive toy in order to make a call, clearly advertising it to potential muggers. Where I live that is just about everyone you see.
Does seem strange though that cheap old Nokias can do this, but a nice new computerised phone can not. Then again it is Microsoft. I have only had it a week, but already I have found that WM5 is not very backward compatible with software. There are issues with bluetooth headsets (which is why I cancelled an order), and in a week just like old ME, I have lost count of the number Soft Resets that I have had to perform.
I find the most useless feature is the voice dial, you have to open, start, programs, voicedial to make a call or use it. Why not just run the app manually rather than trust voicedial to guess what your after.
Sorry guys but I am not sure what the fuss is about.
I had my phone for a month before getting the BT headset (no problems there by the way) so I assigned the voice speed dial to the comm manager button. Easy and useful and you have the comm manager icon in the today tray so the button is not a major loss.
Now that I have the H350 which is more comfortable than the wired hands-free any way, everything works smoothly but this is with the i-mate ROM. Perhaps your BT troubles are from the Orange ROM?
voice speed used to work.....
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Re: voice speed used to work.....
sickboy555 said:
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Click to expand...
Click to collapse
The wired headset does not work fully, it can only be used to answer or close calls, it will not initiate voice dialing. I bought a cheap bluetooth headset off of ebay, it paired straight away and initiates voice dialing. I have never been able to get my headet to work, I now just plug it in if I want to play music.
I am not sure about Dopod and Orange ROMs, but in i-mate ROM the speed dial app it self (cyberon voice speed dial) is in the extended ROM while it's settings applet is in ROM.
As for the part that is responsible for answering / ending calls that should be in ROM with any version.
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
sickboy555 said:
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
Click to expand...
Click to collapse
Sorry I read too quickly, I originally started this post before I got bluetooth as I could not get the wired set to work.
Hi
From what I had read in the past when I was having problems with my headset, Cyberon's Voice Speed Dial software is embedded in the OS it does not come as a cutomisation. I have just brought mine up and it simply says Cyberon Voice Speed Dial Setting Version 1.1 Build 51212. Copyright (c) 2005 Cyberon Corporation. There is nothing there related to Orange, and I can not find it in any of the Orange Extended ROM CABS.
I guess Microsoft did a deal with them to install it in the Phone Edition of WM5.

Cyberon V Speed Dial, not can iniciate voice call - Help!

I installed Cyberon Voice Speed Dial on my Omnia, but not CAN initiate voice call by bluetooth. I have to trigger the application on the handset screen for a shortcut and then the call is transferred to the headset. The strange thing is that if the call comes in, that is, upon receipt of the call, I usually attend the headset. However I noticed that when you release 'button on the bluetooth headset a little more length, something like 01 seconds, fires the standard dial pad. So if you drive a bluetooth program on PPC, I think is missing only the direct action triggered by the program for bluetooth voice dialing (Cyberon), that is, assign to the bluetooth function to activate the program Cyberon Speed Voice Dial. However, if the key bluetooth is already pressing the dial pad Samsung's standard, and opens the microphone bluetooth, what is missing in my understanding, it would redirect (change) the action of the button the program you want.Se PC, I would say that would be only a matter of changing the shortcut target .. but if in the PPC do not know how .. someone help me please?
Hi Aureo,
You try to install JETware Hands-Free Extension v1.31, under menu>advance config>tick on voice dial, tqvm
Thanks, I did this, but the "voice dialing" is not enabled on my device. Displays a message (No voice dialing ...). I do not know what to do, was my good old HTC Diamond that worked all right .. but the screen I8000 is wonderful, so I insist.

[Q] Problem with CDMA Treo Pro and iLuv i222 Bluetooth headset

Greeting everyone, I hope that anyone can help me.
I'm from México have a Treo Pro, I recently bought an iLuv i222 bluetooth headset. I can listen to music just fine and the controls for it work perfectly. I can answer calls and dial the last number with the headset call button. The problem is that when I press it for 2 seconds in order to use the voice dialing nothing happens on my phone. I installed the speed dialing program as it didn't have one. If I activate it from the phone it works but when I try using it with the BT headset nothing happens, I only hear a beep but the voice dialing screen doesn't appear on my phone. I hope that anyone can help me.
what you need to do is enable voice command. i have wm 6.5, so i goto settings personal, voice command. i dont know what version you have, but if you look around in the settings menu it should be there.
cheers
Thanks for replying. The problem is that aparently the Mexico version of the Treo Pro doesn't come with Ms Vocie command. Do you know if there is any ROM of it?

Categories

Resources