Database Users

help me!!!!! please i can`t start my P3300

anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..

hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?

it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?

dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...

Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.

arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks

Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?

MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?

Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan

ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403

USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!

same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz

well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work

y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too

trouble with hard spl

Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?

Use XP. I bet it works OK then...

4.0 Driver installed?
I have a stock Vista Ultimate, stock Device Center 6.1 and a German Orbit 2. It took me a while, but I finally managed it.
I didnt turn anything off, nothing. The only thing I had to change since the O2 ROM doesnt run unsigned stuff: the reg-entry to allow unsigned apps. Thats all.
Remove SD-Card
Connect to Device Center, wait till connection is fully established
Start the supplied RUU from HardSPL package
Follow instructions/click next/next/next...
Check your device, you have to confirm the execution of the loader
When the tri-color screen appears, unplug and replug, it'll upgrade the SPL and takes approx. 2 seconds
If you have no success at all: try to leave the device at the tri-color screen, quit the RUU and run it again, just leaving the device at the tri-color screen.
After a couple tries, I managed it and I'm happily running a stock HTC ROM instead of the O2 one.
Good luck, report back if it worked.

bencassie said:
Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?
Click to expand...
Click to collapse
u must be in normal status i mean just whe u r synching with vista and the ppc should be on and then start the hard spl (u don't need to go in bootloader by yourself) it will go to bootloader automatically and then upgrade will be successfull.
so
connect ppc with wmdc vista and then when connected and start hardspl

tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box

bencassie said:
tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box
Click to expand...
Click to collapse
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL

Thanks A Million!!!!
Olipro said:
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL
Click to expand...
Click to collapse
Olipro, You saved my life. After trying to flash my own cooked rom, my cruise wouldn't go beyond the splash screen. I used your tip and it worked!!!
THHHHAAAAAANKK YOUU!!!
Carlos

Herald Broken

Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys

just perform a Hard Reset and your problems will be solved
if u dont know, look in WIKI section

Thx for your Answer but unfortunatley it's not that easy.. I already performed a harware reset.. and I already treid to play a new rom on the device but it diesent work because the desktop pc can't connect the device via activesync.. The desktop doesn#t evene recognize the device..

a) well, you have to provide us some data.. turn off phone, hold camera+reset with the stylus and tell the numbers that r shown on ur herald screen
b) have u tried to flash via memory card?? can work
c) press power to set-standby mode. Then plug usbcable and hit power, device will "revive usb" and activesync should detect it. And go to Settings > Connection > disable advanced USB mode..

Nettzwerg said:
Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys
Click to expand...
Click to collapse
This is just a shot in the dark, but have you tried someone else's sim card in your phone with out the micro sd in it? My phone started to act up, and it turned out the sim card was bad.

@ tramuyo:
Thx for your reply.. I did what you suggested, and well: BIG MAGIC happend
No just kidding.. I'm not that into PPC to know theses special tricks.
But well here is some data:
IPL 4.17.0001
SPL 4.17.0000
I have absolutly no idea how this may help but i'm pretty confident that everyone here is more an expert than me... ;-) I just use these Toys..*G
And no I did not flash via sd car.. I just used the original WM6 Flash tool provided by HTC, and that works via activesync as fare as i know.
@dougstoner:
Also Thxs for your reply but the sim works. I testet it on another phone. I wish it would be as easy
UPDATE:
Removing SIM and SD Card -> Device boots...
Rom Flashed with originial HTC WM6 -> Devie workes WITH SIM and SD Card
After several reboots for test purposes -> same problem as before... AND problem is still there when using just one card..SIM or SD Card and even when using no card...

i think ur problem is microSD card. reformat in another computer and try with your mobile
btw,
congratulations!

I already did that.. With no longing effect...
I guess I really should send the device to HTC, and say bye bye for at last 3 weeks...
And why congratulations tramuyo? Because I got that thing runnig with the help of the HTC Support

oh no.. sorry, i understand you have done it (i dont understand too good english language)
But we can give some support to avoid send it to htc

Major Problem!!!

I had my 8125 connected to my computer and was in disk management. I computer DELETED my HTC drives! PLEASE TELL ME THERE IS A WAY TO GET THEM BACK! PLEASE!!!! was running XDA Mobile 6 Release 5 FINAL with custom firmware ipl 2.26 and spl 2.26. It can connect to usb but is not recognized. any help. The firmware updater doesnt see it! help! please!
-Rico-

What do you mean "drives"? Does the phone boot into Windows?

No. it goes to the "emergency green color usb screen. the same one if u hold teh picture button on starting. It would just like deleting a harddrive partition. no more data on it. and no drive space because it needs to be re-formatted. can I reformat with some program? windows wont recognize it. any thoughts.
-Rico-

Everytime i try to reflash from the bootloader the program gives me an indescript error and shuts down... I need help!
-Rico=

It sounds very bad...
But is worst your english men...
I think mine is bad but you told me, scuse let me pass trough hahahaha
First of all (what i can understands)
You are on WM5Storage seing your Trueff disk (this cant be, ok?...) and for some reason your computer delete that disk? (imposible men... but many things happend with this devices, oneday Aliens comes to my bedroom and tooks it from my hands and then... its a joke hahaha)
You were running that custom ROM but....
I ask AGAIN and AGAIN!!!!!!!!!!
Are you cid sim unlock? what da heck is a custom firmware?
And now your phone is in Bootloader screen? what da heck is the emergency green color usb screen?
Wich one is the picture button? are you talkin about how to eneter in RED Green Blue Screen (Bootloader)?
What was the last Rom you have runing ok?

ok thanks for helping... here are the answers to your questions:
Are you cid sim unlock? what da heck is a custom firmware? Yes- its cid unlocked with updated firmware for isp/spl to 2.26. I updated them with a packed rom for windows mobile 6. Its a custom pack from XDA Mobile 6 Release 5 FINAL - Full.
And now your phone is in Bootloader screen? what da heck is the emergency green color usb screen? Yes, everytime I start it up, it goes directly to bootloader. the red,green,blue screen. it only shows the isp/spl numbers on it.
What was the last Rom you have runing ok? XDA Mobile 6 Release 5 FINAL - Full
This is what im thinking. windows erased the partitions that was the phone disk. The WM5Storage is what I was using, windows recognized and deleted the storage partition on the phone. so I need a program or a method for re-creating that partition onthe phone. is there a program or something I could use in your experience? Everytime I try to reload a rom, the programs just crash on me, I think its becaues the disk onthe phone has been 'deleted' by windows partitioning.
Thank you for your help,
Nick

iamrico00 said:
ok thanks for helping... here are the answers to your questions:
Are you cid sim unlock? what da heck is a custom firmware? Yes- its cid unlocked with updated firmware for isp/spl to 2.26. I updated them with a packed rom for windows mobile 6. Its a custom pack from XDA Mobile 6 Release 5 FINAL - Full.
And now your phone is in Bootloader screen? what da heck is the emergency green color usb screen? Yes, everytime I start it up, it goes directly to bootloader. the red,green,blue screen. it only shows the isp/spl numbers on it.
What was the last Rom you have runing ok? XDA Mobile 6 Release 5 FINAL - Full
This is what im thinking. windows erased the partitions that was the phone disk. The WM5Storage is what I was using, windows recognized and deleted the storage partition on the phone. so I need a program or a method for re-creating that partition onthe phone. is there a program or something I could use in your experience? Everytime I try to reload a rom, the programs just crash on me, I think its becaues the disk onthe phone has been 'deleted' by windows partitioning.
Thank you for your help,
Nick
Click to expand...
Click to collapse
Well if you get stuck in the bootloader just flash the rom again, when it finished youll get a working WM again

iamrico00 said:
Yes, everytime I start it up, it goes directly to bootloader. the red,green,blue screen. it only shows the isp/spl numbers on it.
Click to expand...
Click to collapse
This is good news. It means you don't have a brick, yet (theoretically).
If there's any way you can charge that battery before flashing (say, in a friend's phone), do it! Low battery will definitely cause a failed flash, and the battery won't charge in your phone when it is stuck in bootloader mode.
After you charge your battery, find Mun's RUU, and install Wizard Love on your phone using the Mun RUU, not the one that comes with Wizard Love. If this doesn't work, try loading the phone's original service provider ROM (if you have a G4, you must first remove HardSPL). Then, you should be able to flash back up to XDAM6 after that. Your data is history, but the phone is recoverable. Just keep trying.

Redaing...
I see something interesant this: line...
can I reformat with some program? windows wont recognize it. any thoughts.
Click to expand...
Click to collapse
So this is the problem men! on XP the corner downright when you enter in bootloader and conect it via USB a pop up comes saying The device is not recognized please unplug and replug to bla bla bla....
I think that youu need to go here http://forum.xda-developers.com/showthread.php?t=276963
and try this metod but you need a clean MiniSD and a backup from another wizard the good news is that goes to bootloader and its cid unlocked and yes is truth!!!! get fully charged your battery men!!!! get a way to charge it without the phone cause it dont charge men!
Or here: http://forum.xda-developers.com/showthread.php?t=425526 this needs somethings less than the others but is not trudly proove so lets make your wizard revives men!

Thanks guys, the last post seems to be the one that may work... but I need a backup of another wizard... could any of you guys be so kind as to upload one? Id be the most appreciative. Thanks
-Rico-

Got it!!! Qppc's reply worked like a charm... good stuff guys... you rule!
-Rico-

"OUR" pleasure men!!!
We are here to serv to y'all

Hi i also did the same thing to my wizard could someone send me a backup rom to copy to my SD card thanks

(UN)Hard SPL and generic rom. What do you think i should do?

Hey folkes
I dropped my phone yesterday. First the display would'nt show anything but this morning tha display worked fine but the touch does'nt work so i need to send it to the servicepartner that my provider uses.
Should i (un) hard spl and install a generic rom? Is there anything else i should do so they cant se that i used non generic roms?
/A from now on a Nokia N95 user again :-(

Yes, definitely.
Flash a generic ROM back on first, then flash the original SPL back.
I just hope you can do it without the touch facility working.

ZenithUK said:
Yes, definitely.
Flash a generic ROM back on first, then flash the original SPL back.
I just hope you can do it without the touch facility working.
Click to expand...
Click to collapse
You can do this from a computer with the RUU so there isn't a problem I guess.
Good luck dude!

If I were you, I try first to make a hard reset in order to see if touch is really dead or not...

Can i put back the stock SPL with the micro SD card? The problen now is that i cant run the RUU becurse i can't configure my device. I am pretty much stuck at "Tap the screen to configure your device" I knew before that i could get stuck here but i was able to flash the stock rom anyway after the hardreset.
But when i try to put the stock SPL back the RUU says "Connection error"
So my onlu option at this point is if this works with the micro SD method.
Any experience anyone?

Badankan78 said:
Can i put back the stock SPL with the micro SD card? The problen now is that i cant run the RUU becurse i can't configure my device. I am pretty much stuck at "Tap the screen to configure your device" I knew before that i could get stuck here but i was able to flash the stock rom anyway after the hardreset.
But when i try to put the stock SPL back the RUU says "Connection error"
So my onlu option at this point is if this works with the micro SD method.
Any experience anyone?
Click to expand...
Click to collapse
You can still run RUU, but make sure you flash the stock rom first.
To get RUU to work, start your x1 in boot loader mode (turn it off, then press and hold both power and volume down until the tri colour screen comes up), now connect your phone to your pc with the usb cable and run the RUU.