My wake-up alarm (a standard one, from "clock" Today went off today as usual, only it did not display any notification bubble or icon. Since then it's in a constant loop, I cannot turn it off, tried settings, several soft resets...Even though all alarms are disabled now in settings, this one is still on.
It may have something to do with Remapesoftkeys (tweaking registry settings) I had used...
Any suggestions guys? Perhaps to tweak back the left soft key to original (to display notifications again)? How to do that (I have Resco Registry, but have never used it).
google for `scary bear check notification` to clean it
Cheers, I've tried pmClear instead
<I got frightened by the scary bear >
but it didn't work for me.
I juggled around with my backups and it's fine now!
On a side note: major P I T A. I just hope it does not happen again,backing up right now, just in case...
i a similar problem on my old Atom a while ago, it was triggered by Battery Pack Pro from OmegaOne, it has some notification enhancement features. Probably not the same issue, just thought it could be something to look at.
ozsmac said:
i a similar problem on my old Atom a while ago, it was triggered by Battery Pack Pro from OmegaOne, it has some notification enhancement features. Probably not the same issue, just thought it could be something to look at.
Click to expand...
Click to collapse
FYI, I have noticed it on WM5 and WM6 on imates and htc's. I think is a windows mobile problem.
I never use the alarms ...
Related
Hi, guys.
All of a sudden, BT icon (the one that's located in the bottom right-hand corner of the screen) just dissapeard :x I didn't install any new software, didn't perform a reset, or something like that, it just dissapeard for no obvious reason. Any ideas how I could get it back on the screen?
TIA,
Zeljac
it once did that to me a softreset got it back though
That was the first thing I tried but the situation is still the same
what if you go into settings->connections and choose bluetooth and change it from what ever it's set to and press ok
and maybe change it back again
If you have the last version of BTTools you can push in the new BT icon and, inmediately, make soft reset.
Of this form I have the old BT icon again.
Thanks a lot, mate. I did exactly what you told me, and the icon came back...
Tnx,
Zeljac
Ooops, here comes the problem again After gettin my BT icon back, I removed BTtools, and the icon dissapeard again. I tried the same trick again but with no results. So my question is open for your answers once again
I have the same problem, it was a day or two after I installed and removed GB-Soft Tweak, it went missing ... reinstalled the Tweak, after a few soft-reset, it's gone again until now. Do you have this Tweak installed?
Have you already tried to change \HKLM\Services\BTIcon\Keep or any of the other settings under this key?
Hope that helps
Matthias
Hmm, a very strange thing happend. I synced it another computer (the one that I sync to maybe once or twice a week) and after that the icon just came back. So far, it's still there. Hopefully, it will stay that way :wink:
Anyway, tnx for all your replies...
Btw, I don't have GB-Soft tweak installed, and I was just about to start playing with the registry when the icon just appeared again.
Greetings,
Zeljac
the value for that registry key (keep) was set to 1. so, I set it to 0, soft reset, still no sign of BT icon.
then i set it back to 1, soft reset ... BT icon came back on!
however, in the next reset ... it's gone. something is messing with it in the background.
I also need my BT icon back.. I-Mate ROM 1.72 Any help, please?
I had the same problem. Days ago I installed skin for the keyboard and mysteriously icon BT returned.
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=424
I think there may be a link between the missing BT icon and the number of Today plugins installed or events being processed at startup. I think it is an Operating System issue.
For example.
If I soft reset my unit I can get the BT icon to vanish.
If I then deselect any today plug in and soft reset again the BT icon re appears. However if I do not deselect a today plug in and soft reset the BT icon does not reappear.
So perhaps it is related to a timing of events on load when starting?
Ed
This could be a good clue. The timing on startup sounds like a good theory to the problem.
If you look in the registry under [HKLM/Services/BTIcon] there are some interesting keys named: Index, Keep, Order and Context.
Anyone know how these are used???
(The keys "Order" and "Index" seems most interesting)
/Oggi
I just found a solution that worked for me
Read this:
http://forum.xda-developers.com/viewtopic.php?p=50131#50131
/Oggi
Oggi said:
I just found a solution that worked for me
Read this:
http://forum.xda-developers.com/viewtopic.php?p=50131#50131
/Oggi
Click to expand...
Click to collapse
Similar to what I have said but that thread says to uncheck every today plug in. I have found you don't need to do that. For me just unckecking a single plug is in enough.
I'm pretty sure it is a loading issue.
Ed
Hi, sorry to invade with what seems like a trivial issue but does anyone know of an app that allows the following functionality? I used my old phone as my alarm clock and am missing the functionality on my Magician -->
1) BIG snooze and off button / or hardware button map for off/snooze (can't see much at 5am!)?
2) Play audible alarm at max volume even when PPC muted?
Any help would be much appreciated - or good excuses as to why I have been late for work since I got my new toy!!!
Thanks,
OB.
How about this one?
that prog is great and what u ask for. i use it myself!
Perfect!! Thanks very much indeed...
One slight problem - The today plugin conflicts with my Calendar plugin and completely removed it from the today screen and config page?!?
I did a few resets and uninstall / re-installes to no evail, so I removed the pTravelAlarm plugin registry entry (software|microsoft|today|items) and ptplugin.dll (windows dir) followed by a soft reset and my Calendar was visible on the Today screen again... odd?
I am not too bothered about the Today plugin part of the pTravelAlarm program so still happy :lol:
OB.
You could also try Spb Time. Large snooze button. Never fails to wake me up.
obarnes said:
Perfect!! Thanks very much indeed...
One slight problem - The today plugin conflicts with my Calendar plugin and completely removed it from the today screen and config page?!?
I did a few resets and uninstall / re-installes to no evail, so I removed the pTravelAlarm plugin registry entry (software|microsoft|today|items) and ptplugin.dll (windows dir) followed by a soft reset and my Calendar was visible on the Today screen again... odd?
I am not too bothered about the Today plugin part of the pTravelAlarm program so still happy :lol:
OB.
Click to expand...
Click to collapse
Which plugin do you use? I'm using calender+ without any problems.
Dravpnir said:
Which plugin do you use? I'm using calender+ without any problems.
Click to expand...
Click to collapse
This was the standard built-in plugin that was trashed -- I did try Calender+ and it worked fine, but wish it would show a tomorrow appt. if it is the next one, as the built-in one does...
OB.
I have now tried both the pTravelAlarm and the Spb Time. The Spb Time is cheaper, has more functions and are better looking than pTravelAlarm => use Spb Time
I don't follow you with that you can't see tomorrows appointment with calender+. I can see the following two days with all their appointments. You can easily display up to 31 days with calender+.
Spb Time is about what I wanted as an alarm when migrating from Nokia to Magician. Had to install some fix to get it working though. Alarms and Windows Mobile doesn't seem to get along.
Dravpnir said:
I don't follow you with that you can't see tomorrows appointment with calender+. I can see the following two days with all their appointments. You can easily display up to 31 days with calender+.
Click to expand...
Click to collapse
I like to display next 2 appt. only. So if I have a 5pm and an 8am next day, I like to see them both on the today screen but not more than 2 appt. so the display 2 days does not work for me? Unless I am missing something in Cal+?
Thanks for the inputs, much appreciated...
OB
Loboman said:
Spb Time is about what I wanted as an alarm when migrating from Nokia to Magician. Had to install some fix to get it working though. Alarms and Windows Mobile doesn't seem to get along.
Click to expand...
Click to collapse
Strange, I have no problems, so far....
@obarnes With calender+ you can set it to display the next x (between 1 and 31) days, hours, appointments and so on. Just enter the options and set it to whatever you want.
obarnes said:
Hi, sorry to invade with what seems like a trivial issue but does anyone know of an app that allows the following functionality? I used my old phone as my alarm clock and am missing the functionality on my Magician -->
1) BIG snooze and off button / or hardware button map for off/snooze (can't see much at 5am!)?
2) Play audible alarm at max volume even when PPC muted?
Any help would be much appreciated - or good excuses as to why I have been late for work since I got my new toy!!!
Thanks,
OB.
Click to expand...
Click to collapse
I have used both WolfClock and StopTime. Both are pretty good and they will do what you want.
StopTime is more barebones, visually simpler and to the point, though less refined. While cruder, it is quite good at what it does. Also has various timer/stopwatch functions.
WolfClock is more visuals (fancy backgrounds etc) and colours. It runs of Compact.net, is therefore a bit slower to boot up the firt time after a soft resent. It also eats up more memory space with all sorts of cute things like a setting where you can tell it to play music for x mins until you go to sleep. Some might call this "bloat". The one thing I will say is that at night you might find the choice of a softer screen color worth the extra memory.
Both have good handy button size for when you need to stop, snooze etc and both are free.
I have recently installed pocketzenphone and magic button as per recomendations here, however I subsequently am having problems with the windows alarm. When I set an alarm it goes off at the specified time but does not bring up the notification screen for me to dismiss it and subsequently itkeeps repeating unless I delete it from the notification queue using pocket mechanic.
Any ideas why this is happening and if I can correct it?
Thanks
I can confirm the same problem with a German T-Mobile MDA Pro.
Do you have the 'Display' option selected in the PZP notification settings for your profile? I think you need to select this as well as 'Sound' and 'Flash' (or whatever you want). The Display option is the bit that gives you the 'Dismiss' button, I think. :?:
this problem occurs without PZP installed here.... but thanks anyway!
Check your notifications queue:
- duplicates of sddaemon
- \.\\NOTIFICATION....SCRIPT... entries
Could b 2 many notifications clogging things up.
Let us know what you find and whether you solve this. Iw ould immediately suspect PZP, but it's interesting that someone else has the problem without PZP. Strike "interesting" - add "worrying"
I have removed PZP and the problem has resolved, I am using the 5.3 version, does anyone know if the 5.5beta version has this problem?
This sounds similar to my problem, i don't have any extra apps installed apart from TomTom, but i get alarms going off that i set previously and have since deleted! How do i stop them??
I've got a problem with the alarm clock function. Everytime I set a timing for an alarm and disable/change the timing for the alarm, it still continue to ring the following day. For example if I set it at 7.00pm yesterday and change it to 8.00pm today. The alarm will ring both at 7.00pm and 8.00pm. Any idea anyway to solve this problem? It's a minor problem but it does get on my nerves (=
Cheers.
Uncheck the box, and untick each day before you change alarm. OK in upper right. Go back in, make changes, check & tick as usual. This minimizes the problem for me. If you want a freeware to remove duplicates search Scarybear Check Notification.
Universal same story
My Universal had exactly the same problem, with both WM5 and WM6. may be a Windows bug?
In the HTC Universal topic in this forum, there's a lot of info to be found on this issue.
scharnet said:
Uncheck the box, and untick each day before you change alarm. OK in upper right. Go back in, make changes, check & tick as usual. This minimizes the problem for me. If you want a freeware to remove duplicates search Scarybear Check Notification.
Click to expand...
Click to collapse
Scarybear's app is not really safe to use on WM6! Beware...it hasn't been updated for years now...
Try using SKtools instead for fixing the duplicate notification-entries...
These are probably causing your problem Steve
I had some alarm issues as well, and running SKtools after a number of reboots has fixed it. WM6 is a lot cleaner already than WM5 and WM2003SE, but sometimes there are duplicate items being generated (seems quite random; have used Kaiser for 2 months without problem appearing)...
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
jomo25 said:
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
Click to expand...
Click to collapse
Thanks a lot for the answer...I've followed you tricks...but in my case the problem appears in a systematic way :-((((
I love UL but its still a tiny bit buggy. It just doesn't seem to like certain today plugins. I don't have a rhyme or reason for it, but sometimes it doesn't play nice.
PocketWeaver?
Could it be PocketWeaver? I've used UL for several months now with MANY today plugins. Currently I am using it with both PocketDigitalClock and TodayAgenda. Since PocketWeaver is the only one I haven't tried could that be what UL is not behaving well with?
At one time I had 5 plugins running in 3 tabs and UL setup has never hung for me.
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
I noticed I couldn't get the Audio Manager plugin to work properly in UL, wouldn't expand on selection.
I have phone weaver running without issue. Phone Alarm was giving me problems and very infrequently batterystatus
rifraf1 said:
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
Click to expand...
Click to collapse
I wait several minutes...and it hangs also doing a simple INI refresh...
lightman3dd said:
I wait several minutes...and it hangs also doing a simple INI refresh...
Click to expand...
Click to collapse
UPDATE: i think to have found the reson why...I've set all the ico dimension to a "correct" dimension, like for an ICO with maximum of 48px i've set 48px and not 52 or something more and for an ico of 68 i've set 68 not more or less...and all is working weel now. I can do ini refresh and modify the settings without any phone hang.
I figured I try out UltimateLaunch and I made a new tab and added BatteryStatus today plugin. It locked up, after soft reset it locks up within a few seconds. Any ideas how I can fix this without a hard reset? Thanks
Chris
EDIT: I was able to get to the Today screen and disable UltimateLaunch after about 20 tries and some caffeine! I disabled battery status in the today screen this time and turned of the minimize in Ultimate Launch. This fixed my issues. Thanks anyway.
Chris
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
Adjust the height and add a 2nd plugin, just like you did with the 1st.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
If you want to have more than one today plugin on the same tab (i.e., HTC Home with another plugin underneath it) be sure to "combine" the tab.
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Thanks very much for all your help. I got it.
Maybe you Gurus can help me....
I wish to have MyFaves as a UL plug-in but it will not show up unless I have it checked in the Today screen items, then it shows up twice (once in UL & once on my Today screen). Can anyone help me? BTW I have a cooked ROM & am using DuPrade's MyFaves cab file.
dzelaya18 said:
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Click to expand...
Click to collapse
...267 if you don't have the system tray.
I too experienced some lockup issues using Battery Status. I have since unloaded it and no lockups since. I'm thinking it's anything actively monitoring the system that UL doesn't like. Although i have RLToday installed and using it for my msgs notifications, but that is a registry read.