Related
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse
I want to use GPRS/EDGE while connected to ActiveSync, instead of my computers connection.
Is this possible?
My work proxy blocks IM & other sites (web-based e-mail). My preference would be to use some remote control software (Pocket Controller Pro, for instance) to control my Wizard via ActiveSync, and use my computer's keyboard (!!!), but over GPRS/EDGE.
Set your ActiveSync connection as "Work" and your net connection as "Internet" and it should connect to GPRS/EDGE even when you are on ActiveSync. At least it does on my T-Mobile MDA with the stock 2.26 ROM.
This is not working for me, on my stock T-Mo (US) 2.26 ROM.
I go into ActiveSyn 4.2, File, "This Computer is Connected to" and I select "Work"
When I try to access anything (IE to a page I haven't been to before, start MSN Messenger, etc.) it says I can't access.
As soon as I unplug the USB and refresh/SignIn, GPRS starts up and I'm good to go.
Is there no way to use GPRS while connected to ActiveSync?
In mine if i connect with agile using gprs and then i plug to pc agile stays connected to gprs...but if i start agile when connected to the pc it uses the pc connection...maybe u can try to connect ur im before connecting to the pc...but for pocket explorer i dont know as it dont maintain any kind of persistent connection...
now i know this works with wifi.. but dont know about edge..
http://www.airscanner.com/downloads/airfix/airfix.html
**EDIT**
i did install it, i connected via edge, then ran the program, then placed it in my cradle and edge stayed connected while activesync sync'd... since i am at work however i was unable to vft if i was able to browse via edge.. but their website does say something about needing to set up static ip's (when referring to wifi) i know thats not possible with edge, but wonder if i can do it with activesync... hmmmmm
the way it works for me..
its kind of crude, but works for me.
i connect my wiz via activesync and after its connected use remote display to work with it on the main computer screen.
i use process explorer to kill rapimgr.exe, wcescomm.exe and wcesmgr.exe. the remote display still is connected and takes my input from the main computer. now i can use gprs to go out on the net. in order to re-sync i start activesync on the pc again.
hope this helps,
sl
lafloer said:
its kind of crude, but works for me.
i connect my wiz via activesync and after its connected use remote display to work with it on the main computer screen.
i use process explorer to kill rapimgr.exe, wcescomm.exe and wcesmgr.exe. the remote display still is connected and takes my input from the main computer. now i can use gprs to go out on the net. in order to re-sync i start activesync on the pc again.
hope this helps,
sl
Click to expand...
Click to collapse
Ummm...... all I can say is WOW!
I was just about to type up a message saying the "Login to Agile then ActiveSync, Agil should retain GPRS" thing did NOT work for me....
THANK YOU! this is awesome!
hey all.
thx 4 all the help,advice n guides here.
i have a htc prophet n a windows xp laptop. heard that u can use gprs via bluetooth to connect to internet on pc.howd u do that.plz outline.
You're probably confused... You have to establish an activesync connection by bluetooth and then you'll have access to the web... Just like using the cable but slower...
and how do u setup the active bluetooth connection?
You just have to activate the 'modem link' on the PPC. In Vista at least, all I do is create a new modem connection using the bluetooth modem on the PPC and dial *99#. Pretty simple....
In some ROMs there is an Internet Sharing Option....just activate it, select Bluetooth PAN & connect to the device from PC
could some1 plz outline the steps for setting up the connection, coz all i hear is 'murmuring' ..plz,am still new to all this ppc stuff
Look at the Wiki - start at here's a hint: http://wiki.xda-developers.com/index.php?pagename=Prophet_USBModem
Hello friends!
I spent about 2 days on my phone wondering and trying to get internet connection on my Prophet...So I did it!It's like this:
When you connect your Prophet via USB it will show you new connection....
Go to Start/Control Panel/Network Connections and than click on left side "Set up a home or a small office Network"...So when you finish the wizard,restart your computer (do not disconnect Prophet) and it will work...It was the only way for me to get Internet Connection...I hope I helped someone just like others helped me...Greetings!
can i use GPRS surf the internet with laptop(not with the phone), is there any setting in order to surf the web? thanks!
I think It's not worth it...In Slovenia,where I live,GPRS is at least 10times more expencive than tipycal cable NET...Some of my friends tryed to connect laptop to NET by smartphone,but the speed in really low and also phone bill was shocking...So get standard internet...Greetings!
HEY everyone....
i am TIERED of trying and searching can anyone tell me how to Connect my PPC to internet using PC...why...complicated....
but i need your help in case anybody knows....
i need steps to do so...(i was told i have to create a new workgroup onto my PC and BLA BLA BLA but i didnt know how to figure it out)
PLEAAAAAAAAAAAAAAAAAAASE i need your help
if you mean using bluetooth or usb then when you are connected to activesync the pda use the network of the pc
well thank you "Rudegar"...
i am connected using USB to active sync...but it doesnt use the network of the PC...i have tried too many ways but i cant figure out what to do...
and i have choosen the option (connects to internet) from active sync and still i have a problem...
can you please help me out...
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
if i am reading your post right you are trying to use ur ppc as a modem to connect to the internet?
If so, use these steps:
connect ppc to PC thru usb, let activesync do it's work
on PPC go to Start>Programs>Accessories and open the Internet Sharing program
After this is done, it should allow you top connect to the internet by using the PPC as a modem. It's a slow connection, but it works
Soniku007 said:
if i am reading your post right you are trying to use ur ppc as a modem to connect to the internet?
If so, use these steps:
connect ppc to PC thru usb, let activesync do it's work
on PPC go to Start>Programs>Accessories and open the Internet Sharing program
After this is done, it should allow you top connect to the internet by using the PPC as a modem. It's a slow connection, but it works
Click to expand...
Click to collapse
Well thanx for your reply, but actually i want my PPC to connect to the internet through my PC!!! anyway thanx for the reply
Rudegar said:
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Click to expand...
Click to collapse
ok....i did what you have asked me to do..but...when i try to open a web page a balloon shows up saying cannot connect so i click (setting) it shows me My ISP settings ...where i have to specify a new modem conection ...when i opened a list called (select a modem) it has these choices (bluetooth,cellular line, cellular line GPRS 3G, Generic IrDA, and Hayes COmaptible on COM1...
which to choose....!!! also what to fill in its details,,,,
i know i made a mess and i totally made you angry and mad sorry for inconviniet but i need your help
thanx in advance
i dont change any of those settings
when it's connected to activesync it got network
connection
be sure not to close activesync but to minimize it
Rudegar said:
i dont change any of those settings
when it's connected to activesync it got network
connection
be sure not to close activesync but to minimize it
Click to expand...
Click to collapse
ok...will you please open the connection settings and tell me whats in it....because im sure that my activesyn is on and working perfectly...but i reaaaaaaaaaaally need those settings....
Thank you so much i know im like a pain in the (you know ) but really really i appreciate your help
it's empty it just show
add network connection
add vpn connection
setup my proxy
i use bluetooth mind you if you use usb you have to
check Enable advanced network functionality
in usb to pc though
and your pc activesync should be set to not block it
and your firewall should alow it
usually you don't need to change anything in settings to get internet with usb, try hard reset your ppc and reconnect. Also, IP in your pc shouldn't be specified (keep it automatic)
finally i found the answer to my thread; http://forum.xda-developers.com/showthread.php?t=374172
Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
mine use gprs when i choose my isp in settings->connections->connections-Advanced-select network
even when connected to activesync
hm, I have for both settings there "E-Plus Internet", i.e. my provider... still it doesn't connect. As soon as I disconnect USB, it works.
then i would try unchecking enable advanced network functionality
in usb to pc in connections
still the same... doesn't connect
TauTau said:
Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
Click to expand...
Click to collapse
On the PC head into ActiveSync, open up the Connection Settings for the device in question, try unchecking "Allow data connections on device when connected to PC".
Disconnect the device from USB, then reconnect and sync, then try to access the internet on the device.
hm, I thought exactly that option should be checked, because it says "allow wireless connections while connected to the PC". Nonetheless, I unchecked it, dis-/reconnected it, still no go.
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
scousemartin said:
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
Click to expand...
Click to collapse
There is internet on the PC, though behind a proxy with auth (and some blocked stuff). Since the proxy auth isn't RFC conform it seems, using the internet connection on the phone doesn't work with most programs (i.e. weather updates), some programs even don't have a proxy option (and the one from "connections" doesn't work either). That's why I want the phone to connect itself by UMTS, while I still can remotecontrol it with PocketController. As everybody already said, it should be possible.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
Click to expand...
Click to collapse
mh, the PC shouldn't use the phone as modem, that would violate the security restrictions here badly. I'll try PDAnet and see if I can restrict that.
Edit: PDANet also can't connect. could it be possible, that it is some Windows policy on the Desktop preventing that?
Can you turn Data Connection off in CommManager on the PDA?
desolateone said:
Can you turn Data Connection off in CommManager on the PDA?
Click to expand...
Click to collapse
hm, not really....
I am interested in this as well.
I have the Titan (Sprint Mogul) and would like to be able to connect it to my work computer VIA USB and be able to charge the phone and control it via MyMobiler but the phone should use its EVDO cellular connection for the internet. Instead it appears to use the internet that my work computer has which blocks certain sites and ports for IMAP and POP.
I would like the phone to be able to check gmail (via IMAP) as well as go to any website I would like.