HI,
I HAD SPB BACKUP INSTALLED ON MY BA BUT THE SCHEDULED BACKUP FUNCTION SEEMS TO NOT WORK PERFECTLY.
every time i set a scheduled backup at a certain time it starts the device, perform all the necessary actions (the time to do that is equal to the period it lasts if made manually, it creates the file of back up but.....after it starts up the device automatically, the following written appears:
"unable to locate the shortcut or to open the file"
After i tried to open the .exe backup file and it says:"the file is corrupted"
The lenght of this file is only 450 kb while the one i can create manually is 15 mb.
I discovered that the file which is not openable at the start up is named "SPBBACKUPRUNNER.LNK" AND THE LINK IS REFERRED TO A FILE IN WINDOWS FOLDER NAMED (OF COURSE) "SPBBACKUP RUNNER"
Which could be the possible problem not allowing this.
One most important thing is that i tried also SPRITE BACKUP AND an other backup program and also with these nes i have the same problems performing a scheduled back up.
Is there a setting i have to modify?is there a possible program that stop the scheduled back up program.
Same for me. I have tried all options without success. I am now doing backup manually at regular intervals.
I found that this is the problem when you backup the calendar from WM5 or earlier ROM version and restore to WM6 ROM. So, just don't try to do it that way, make a totaly new calendar in WM6 and the backup and restore will be fine.
I Tried A Scheduled Back Up In Wm 6 But It Doesn't Start When The Device Is Off Or If It Starts, At The End , The File Is Corrupted
hi
even using the manually backup creating a corrupted file , any how to fix it please
i have the same thing was...
one thing i do is Hard Reset my BA, after that it's backup as usual.
well can say just one thing, do not use crappy backup software
i have setuped my device to recover after hard reset for about 10 minutes with all installed software and games without any backup software just one sync and the cabs from the extrom
Related
Hi, I am new in this forum, sorry in advance for my english.
Today the battery from my QTEK 2020 went empty and the backup battery also. The device restarted itself and all the data were lost.
I am regurarly backing up all the data each time I connect to the USB cradle, so I thought.. Hmm no problem, I will restore it from the backup file. Then came the problem...
The device ID from the activesync and from the Qtek doesnt match anymore, so I cant restore the backup file.
How/where can I find this data in activesync so that it thinks that this is the same device like before?
P.S. I am only sure that the device name was "Pocket_PC" on QTEK, but the description I dont remember.
Hi Pipi,
Please see whether the below steps can help:
1) Open Activesync (do not put your PPC into the cradle). Select 'File' > 'Delete Partnership' > 'Yes' (repeat until all the partnerships are deleted)
2) Hardset your PPC (hold power button and soft-reset at the same time)
3) After hard reset, put your PPC in the cradle and let it form a new partnership with Activesync (your should get the default PPC name as Pocket_PC)
4) In Activesync, select 'Tools' > 'Backup/Restore'. Select the backup file you want to restore. Go to the Restore tab, press restore and everything will come back.
Remarks: Please make sure the Regional setting of the PPC after hard reset is the same when you do the backup.
Hope it can help ......
THX I will try, but after i have searched the forum for solutions, i found out that, if you do progressive backup, it is impossible to restore the data, except the full backup.
Is it true?
Yes, you need to use a full backup image to restore as incremental backup does not contain the full image of the PPC and cannot be restored.
i restore inc backup's all the time on my device
if it could not be restored why have the inc backup option at all ?
There are three types of backups -
Full backup - backs up everything
Incremental - backs up everything changed since the last full or incremental
Differential - backs up everything changed since the last full.
So - when you restore with incremental you must restore the last full backup and then all of the incrementals since that last full (in order).
When you restore with a differential you need to restore the last full and then the last differental . . . at most 2 restores.
Incremental backups take up less space and time but require more time to restore the system, whereas differentials take more space and time to backup, but take less time to restore the system.
HTH
Different device type
After installing NYDITOT virtual display, my Himalaya crashed bigtime!
Only a hard reset would work.
The problem is, that when I try to restore the backup I get this error saying that the backup was made on a different device type..
Thus rendering me helpless!
I've allready lost 300+ e-mails this way, so I don't trust the backup function any more.
I use newest version of Activesync...
This has happened twice in two days now..
I don't use NYDITOT any more..
hi bonzo,
it's not a big problem: just set the device name AND the regional setting (probably Norwegian for you) to what it was at the time of your backup.
ym
Aha!
So THAT'S why I didn't make it work..
Those darned regional settings!
Thanks a million!
I had the device name down, but didn't know about the regional settings..
yeah it's in the help in activesync
i had that problem once but activesync's help
gave the solution
one of the first time ever windows help help'd me
It was in the help file?
I swear, I read that file five times...
Desperate for a solution...
Oh well.. At least I've got it now..
Hi all,
got a QTEK S110, which is great. Recently done a backup, but when I then tried after a hard reset to restore, it could not, as it said it was for a different device!?!?!
Now I know this is not the case, so does anyone have any ideas what I can do.
I have also done a bit of messing about, and done different backups of my newly reset pda. This time it allows me to restore, but then stops and says some files could not be copied, because they could be in use, and to make sure all programs are shut. The only one open is Activesync, which I then shut And it says that it is all finished, but all my contacts along with other stuff has not been restored.
Activesync seems to be a bit lame. Is there another program I can use to restore the activesync backups?
Nick B
Hi Nick !
Had the same problem restoring with activesync. The backup i made was with country setting to "German - Austria" but the default after hard resetting the qtek is different so activesync quits restoring.
Solution:
After resetting your qtek set the country setting (Start/Settings/System/Country Settings) to the country you had set while you made the backup. The try the restore with activesync.
Good Luck,
Gerhard
Contacts & Calendar are somewhat problematic with backups. Next time use Sprite or another third-party product for backup/restore.
Now to solve the open programs try to boot in safemode. There are several programs to achieve this. I believe sbp pocket plus is one of them. Also you can try to empty the windows\startup folder. Just move the shortcuts somewhere else, especially poutlook.lnk is a suspicious one. I must say I never tried this myself when I had simular probs, at that time I didn't knew to much of the PPC.
Last resort try to synchronize with your desktop, this should give you the contacts & calendar data, which I think is most important at the moment. The other data will come from your AS backup.
Regards, M
... before an hard reset ?
:lol:
Well, my Qtek S200 with tonz of apps installed (mostly on the 4GB SD card) became quite slow. Mostly at boot, worst than before.
I periodically back it up by Sprite Backup, but now I would perform an hard reset to clean up and start again from skratch. And reinstall appz with some criteria :wink:
So, I'm here to ask a checklist for things to backup and how.
For example,
- export registry keys for the personal identification (how to export?)
- startup apps
- ...
Thanks for any hint
Anybody ?
P.S.: where could I find a ROM upgrade for the Italian QTEK S200 ?
As I'm planning to hard reset...
Thanks
...backup verything. I use SQB Backup for backup (ppc files only and not SDcard): pim contacts, emails, system and my document. These you can restore customized.
I backup everytime after i installed some goods.
With PHM register editor i create also backups, only register though...
...sd card backups i won't create because i save the cabs on the pc...
Thanks for your answer.
I always backup everything with Sprite Backup 5.1 (WM5), but when it restores data, everything come back to my actual status.
How could I save ONLY the user profile (inside the registry, I guess) and the most important configs ?
I'll restore (reinstall) the app programs later
P.S.: all programs are installed on my SD card. I noticed most of them, even moved across directories, keep working. This case, should I re-install them, or could I use them as is, simply linking the executable in the storage card directory ?
Thanks again
...i'm sorry to say but you had to create a good working backup earlier. A register is filled with thousends of keys and you can't find a sort of userprofile.
If you've got an up-to-date backup then you can start from zero: you've got already everything by hand.
Perfom hard reset and create backup with minimun install like pim contacts, emails and internet settings. Then install next thing etc. If you need something immediately you can restore backup from before hard reset.
Every program with is installed on SD card won't be executeted before you accept it (that means that shareware could be used unendlessly instead of b.e. 5 times) but you don't have to install them again. So after reset they are immeditate accessable. Best to have made a copy of startpage\programs so you can copy them after hardreset back so you don't have to seek through all the folders on SDcard.
Only all the programs installed on the ppc you've got to install after hard reset again
You can also schedule backups, i.e. daily, which create a backup with only the changes compare to last one. I've got fullbackups of ±12Mb and incrementel of ±8Mb.
So I perform always fullbackups which i delete weekly...
I encountered the following problems all at once,and I think they are related to the same cause.
A) While trying to install an application, I got a message saying that the CAB installation was not successful,
B) when I try to uninstall any application via start>setting>system>remove program, none of no applications are listed.
C) I have an error message 'Make sure the disk is not full or write-protected and the file is not in use' is I try to delete file/folder or to move or rename them. This is so for microdrive, SD, and main memory.
I've done a hard reset. But as soon as I use Sprite Restore, the above problems come back.
Has anyone come across this problem before? I think some unknown processes is locking up my device. In desktop environment, when we have this problem, there is a utility called UNLOCK to solve the problem. Is there an equivalent tool in WM5 environment?
Appreciate any help you guy can give on this.
I have another issue with memory. Sometimes it will show me that the Mini SD is full even if it is empty or i will not show the files in the Mini so i have to reset and then it will be fine. has anybody had this ptoblem before.
I solve the problem by restoring from a day old backup copy using Sprite restore. Initially I tried to restore only the system data and leave the document etc unchanged. However it didn't work. The problem went away after I did a complete restore.
Looks like there is an invisible lock places in the unit, making it looks as is all files and folders are being used by another program. We definitely need a utility program to deal with this because while my approach did solve the problem,I also lost a day's data.
Resco releases its brand new application – Resco Backup
After big success of its backup application for Palm OS, Resco announced today the availability of Resco Backup for the PocketPC platform.
In addition to the standard functionality such as manual or scheduled backup, partial backup/ restore, compression or encryption, Resco Backup offers many superior features such as:
• Incremental (differential) backup beats any other backup product in terms of speed.
• Backup profiles (called projects) enable backups of selected data such as messages, contacts etc.
• Ability to verify backup or check backup set integrity
• Tools for backup analysis, e.g. performing a comparison between the device and stored backup set or between any two backup sets.
• Backup sets can have comments, icons or can be pinned - excluded from the update cycle.
It is highly recommended for anyone who does not like to lose precious data.
http://www.resco.net/pocketpc/backup/
You spelled "lose" wrong on the Website
Just a suggestion:
"Never loose your data again"
Where are we loosing it to? The wild?
The word is "lose"
Thanks,
already fixed
good. will try. hope it will become a classic like resco explorer
resco said:
Resco releases its brand new application – Resco Backup
After big success of its backup application for Palm OS, Resco announced today the availability of Resco Backup for the PocketPC platform.
In addition to the standard functionality such as manual or scheduled backup, partial backup/ restore, compression or encryption, Resco Backup offers many superior features such as:
• Incremental (differential) backup beats any other backup product in terms of speed.
• Backup profiles (called projects) enable backups of selected data such as messages, contacts etc.
• Ability to verify backup or check backup set integrity
• Tools for backup analysis, e.g. performing a comparison between the device and stored backup set or between any two backup sets.
• Backup sets can have comments, icons or can be pinned - excluded from the update cycle.
It is highly recommended for anyone who does not like to lose precious data.
http://www.resco.net/pocketpc/backup/
Click to expand...
Click to collapse
xxza said:
good. will try. hope it will become a classic like resco explorer
Click to expand...
Click to collapse
Yesterday we released next version with the desktop unpack tool and couple of other improvements. There is also a nice speed increase, mainly in the restore phase.
We consider this version a milestone as a lot of functionality covering the needs of a vast majority of users is included and the qualitative parameters are more than satisfactory.
Milestone means we are considering things that could be improved - exclusion rules, FTP, registry-related tools etc. We shall be glad if you have any ideas that could help in this respect.
Best regards,
Michal Sartoris
I'm not sure if I'm in the right place, but I have a question about this application.
Yesterday I used Resco Backup v1.11 to create a backup of my messages because I wanted to flash my device (T-Mobile MDA Vario III, a.k.a. HTC TyTN II/HTC Kaiser) and I wanted to keep the SMS messages I had received.
So I unchecked everything but "Messages (E-mail, SMS, MMS)" and did a backup. I then flashed my device and tried to restore the backup, but failed. After that I couldn't even see the SMS/MMS part on my device anymore, and I was unable to send/receive any SMS. The email settings had also been reset and I had to set up my email account again.
I checked the integrity of the backup and I get the popup "Backup Set Integrity. Valid backup set". Then I checked the error log, and got the popup "Backup set. Valid backup set". So I don't think there's anything wrong there.
About the error, when the restoration was finished I got the popup "Error. Restore competed with errors. Try Restore -> Verify to restore just the differences.". At verify it shows the status "OK" at all files except the file "pmailFolders", where the status is "The system cannot read from the specified device."
When I go to Restore -> Verify, most of the files (about 60) show as "Not in device" and about 15 files show as "!=". When I try to restore single files with the status "Not in device" it shows the restore status view and appears to restore several files and then returns to the verify view. However the file still shows up in the verify screen and remains with the status "Not in device". It then requests a reset, and after that reset I have the same problem: The SMS/MMS part on my device has disappeard, and the email account had been removed.
I tried to remove some files from the backup, as I don't really care about the emails since those can be easily retrieved from my email account, however I had no luck there. If there is a way to remove the emails part and only keep the SMS part from the backup I would be willing to try that, as maybe I would have more luck restoring the backup then.
On a side note, I flashed my device with the exact same ROM I had when making the backup, so it can't be an error caused because there are 2 different ROM versions either. The ROM I used was: RUU_Kaiser_VF_UK_3.08.161.0_radio_sign_25.74.40.02_1.64.08.21
I also had a look at the desktop unpack tool, however I have no idea what I should do with the extracted files (which look the same as when you just extract the .zip files of the backup). I can open the files with notepad and read some of the emails/SMS, but as I said, besides that I wouldn't know what to do with them.
Any help would be greatly appriceated. Thanks in advance!
// ScarS
ScarS said:
I'm not sure if I'm in the right place, but I have a question about this application.
Yesterday I used Resco Backup v1.11 to create a backup of my messages because I wanted to flash my device (T-Mobile MDA Vario III, a.k.a. HTC TyTN II/HTC Kaiser) and I wanted to keep the SMS messages I had received.
So I unchecked everything but "Messages (E-mail, SMS, MMS)" and did a backup. I then flashed my device and tried to restore the backup, but failed. After that I couldn't even see the SMS/MMS part on my device anymore, and I was unable to send/receive any SMS. The email settings had also been reset and I had to set up my email account again.
I checked the integrity of the backup and I get the popup "Backup Set Integrity. Valid backup set". Then I checked the error log, and got the popup "Backup set. Valid backup set". So I don't think there's anything wrong there.
About the error, when the restoration was finished I got the popup "Error. Restore competed with errors. Try Restore -> Verify to restore just the differences.". At verify it shows the status "OK" at all files except the file "pmailFolders", where the status is "The system cannot read from the specified device."
When I go to Restore -> Verify, most of the files (about 60) show as "Not in device" and about 15 files show as "!=". When I try to restore single files with the status "Not in device" it shows the restore status view and appears to restore several files and then returns to the verify view. However the file still shows up in the verify screen and remains with the status "Not in device". It then requests a reset, and after that reset I have the same problem: The SMS/MMS part on my device has disappeard, and the email account had been removed.
I tried to remove some files from the backup, as I don't really care about the emails since those can be easily retrieved from my email account, however I had no luck there. If there is a way to remove the emails part and only keep the SMS part from the backup I would be willing to try that, as maybe I would have more luck restoring the backup then.
On a side note, I flashed my device with the exact same ROM I had when making the backup, so it can't be an error caused because there are 2 different ROM versions either. The ROM I used was: RUU_Kaiser_VF_UK_3.08.161.0_radio_sign_25.74.40.02_1.64.08.21
I also had a look at the desktop unpack tool, however I have no idea what I should do with the extracted files (which look the same as when you just extract the .zip files of the backup). I can open the files with notepad and read some of the emails/SMS, but as I said, besides that I wouldn't know what to do with them.
Any help would be greatly appriceated. Thanks in advance!
// ScarS
Click to expand...
Click to collapse
Hi ScarS,
Unfortunately, we have found a bug in restoring emails in v1.11. Have you tried the latest v1.20? If you will still have the problems, please let me know and we will try to find a solution.
Resco Backup makes copy of massages using database API. This means enumerating all databases in volume file (for massages it is cemail.vol), then enumerating records in the database and write it to backup. Restore will create database which is stored in the backup or if it already exists removes all its records. Then it writes stored records back to database. Unfortunately, creating new records in the databases will create new IDs of these records and mail databases have relations based on this IDs. At the end of restore, Resco Backup tries to replace these relations with newly generated IDs (they are generated by system and cannot be changed). This is the reason, why backup is different after restore.
Deleting some files from backup set to leave just SMS/MMS will not help util you know the structure of these databases. E.g. database with name pMailFolders contains information about all accounts (ActiveSync mail account, SMS/MMS accounts, other mail accounts) with all their settings and folders (e.g. Inbox, Outbox, etc.). Each of this folder has related database calld fldrXXXXXXXX where XXXXXXXX is ID of the folder stored in the pMailFolders database. Each of these folder databases have records pointing to pMailMsgs database where information about messages is stored. Names of files, where message bodies and attachments are stored are made from IDs of records of that messages so when ID of message in the database change during restore, name of the file must be changed as well.
Currently information about databases extracted from backup using desktop unpack tool is useless and is there just for information.
Best regards,
Michal Sartoris
Thanks for the quick reply with detailed information I have just tried v1.20 and tried to restore the backup made with v1.11, however I got the same problem.
Was the bug in v1.11 in the backing up part, or in the restoring part? Because if it is in the backing up part it would make sense that it wouldn't work because then the backup is corrupt.
Before I restored the backup made with v1.11 I made a backup of the current data with v1.20 and also made clone (with another application). After the restoring of the old backup failed I tried to restore the new backup however that failed aswell. Maybe because due to the previous restore (the backup made with v1.11) some settings were 'messed up'? I then used the clone I made to restore my device to the way it was before I installed v1.20.
Eventhough it would be nice to have the data back, it were only about 25-30 SMS that were backed up which I would like to restore and they arn't too important, so if I would end up not being able to it wouldn't be a complete disaster. So if it would take up a lot of your time and you have not had similar problems I wouldn't mind if you discard my problem. I am using a trial version, so I havn't paid for support either.
Thanks for the reply so far, I really appriciate it
// ScarS
resco please read the mail that I have sent to you through private message..Thanks
Backup sussefully done but restoration always gave error. It wont return to the original stage , so I continue using Spb backup which is more accurate for backup and restoration after hardreset.
theme freak said:
resco please read the mail that I have sent to you through private message..Thanks
Click to expand...
Click to collapse
Hi,
your problem has been sent to the right person.
Best regards,
Michal Sartoris
edywanwan said:
Backup sussefully done but restoration always gave error. It wont return to the original stage , so I continue using Spb backup which is more accurate for backup and restoration after hardreset.
Click to expand...
Click to collapse
Hi,
Could you please specify, what error it is?
Best regards,
Michal Sartoris
ScarS said:
Thanks for the quick reply with detailed information I have just tried v1.20 and tried to restore the backup made with v1.11, however I got the same problem.
Was the bug in v1.11 in the backing up part, or in the restoring part? Because if it is in the backing up part it would make sense that it wouldn't work because then the backup is corrupt.
Before I restored the backup made with v1.11 I made a backup of the current data with v1.20 and also made clone (with another application). After the restoring of the old backup failed I tried to restore the new backup however that failed aswell. Maybe because due to the previous restore (the backup made with v1.11) some settings were 'messed up'? I then used the clone I made to restore my device to the way it was before I installed v1.20.
Eventhough it would be nice to have the data back, it were only about 25-30 SMS that were backed up which I would like to restore and they arn't too important, so if I would end up not being able to it wouldn't be a complete disaster. So if it would take up a lot of your time and you have not had similar problems I wouldn't mind if you discard my problem. I am using a trial version, so I havn't paid for support either.
Thanks for the reply so far, I really appriciate it
// ScarS
Click to expand...
Click to collapse
Hi ScarS,
The bug was in the restoration part.
Have you noticed the error description immediately after restore? When restore ends it displays a list of all restored items with a short description. Errors have red text and are listed first.
The error you had after verify means that read (probably from zip) failed. Are you able to copy the files stored in the backup somewhere else using file browser?
Unfortunately current integrity check will not catch all problems. It just reads crcs from all zip files and compares them with one stored in separate file.
Would it be possible for you to send me your backup? I understand if not as such data are very sensitive.
Best regards,
Michal Sartoris
For Rom Junkies?
Hi there resco, I currently use "sprite backup" because it has the ability to restore after a rom upgrade and also to a new device. I can't say that it is without bugs, can you tell us how your product performs in theese actions please?
uniqueboy said:
Hi there resco, I currently use "sprite backup" because it has the ability to restore after a rom upgrade and also to a new device. I can't say that it is without bugs, can you tell us how your product performs in theese actions please?
Click to expand...
Click to collapse
Hi,
Currently, Resco Backup does not have such a feature. When you try to restore on different device/ROM, you will be warned, but you can continue to do so.
Personally I have tried a few times to restore backup from one device to another and it looked ok. But I did not check it into details. E.g. I have succeeded to restore SMS on device without phone
Best regards,
Michal Sartoris