Hi Guys,
I just bought imate Jam or Magician if you like I noticed that I can't set my ring tone to play more than few seconds.
How Do I extend the length of my ring tone to play longer ?
35 people viewed the the topic no single comment
It was the call forward to the voice mail causing the ring time to be short.
Related
Well, it's been a while and everyone's been tweaking their universal, so, have you tried calling yourself and see how many rings it takes before your universal really rings ?
After all the tweaking, it still takes about 2 rings before my Exec actually plays the ring tone. Has anyone been able to shorten this lag time further ?
When my Jasjar is still powered On it rings while I am still hearing the 1st call tone through the receiver of the telephone I have used to call up my Jasjar.
When the Jasjar has powered itself Off, then it is no later than the mid of the 2nd call tone and most of the time just before the 2nd call tone has started playing.
By the way I have done no tweaking in this regard.
Kind regards
Same here, before the 2nd call, acceptable for me.
I am using a device flashed to Jasjar ROM 1.13.53 WWE, Radio 1.04.02 and no extended Rom installed.
regards,
Ruud
You guys seem to get the ringing quite fast
I read somewhere that having many contacts can slow down the phone and therefore increase the number of rings before the exec actually plays the ring tone. I have about 230 contacts with average of 2 tel numbers per contact. Can I ask how many contacts you guys have ?
I'm just trying to figure how to make my exec ring sooner ...
I copied the choice of ringtone directly to my Device/Windows/Rings.
so far it has been ringing almost immeidately.
I have about 100 contacts with an average of 2 telephone numbers per contact.
Regards
Gave an answer on the nr. of rings above, I have about 1.300 contacts with average 2-3 numbers, mail, address.
Calendar is sync with ALL meetings, so also between 1000-2000 entries, I do not recall. I further sync notes and files, but have no tasks.
Hope this helps.
Thanks for sharing the info guys ...
Just found something odd after some testing ... if I use the "Ringer.wav" that comes default with the Exec, it rings just before the second ring starts ... but if I select the "Fantasy.wma" (also default on Exec), the ring only starts after the second ring ... If i use the "Windows Default.wav", the ring also starts at the end of the second ring ...
It appears the more complicated the ring tone, the longer it takes to start ringing ...
mine's varied...i've been using the same ringtone and it can take anywhere from 1 ring to 6 or 7... the varying in lag times has totally lost me. i'm on an old ROM however. could be the issue?
My Dopod 900 rings after 1st call tone when it is ON and on standby mode it rings after 2nd call tone.
My Dopod 900 exactly the same.
golfaholic said:
My Dopod 900 rings after 1st call tone when it is ON and on standby mode it rings after 2nd call tone.
Click to expand...
Click to collapse
my imate (no extended rom features whatsoever), spb pp, diary and weather, using msvc, about 20 meg ram standard boot up.
exactly on the second ring when opened up and screen active.
immediately when i called again the second time to type this email with the lid closed. i assume this is cause the phone and everything was still active cause all i did was close it which really only deactivates the screen.
on the second ring when i turned the device and closed the lid.
so in summary, and i generally dont have much of a problem in this area is at the beginning of the second ring.
I dont have memory card readers running and somebody indicated that this is also a cause of lags.
HI Everytime somebody calls I've to run after phone as the ringtone plays for very short time( 1 min i guess no matter the length of tones). How to make it play for very very long time so that I can receive call at my leisure.
And Everybody what's your average play time of Ringtones? Thanks.
i don't think its the phone that controls the ring time
Its your provider, I get 5 or 6 rings before it goes into voicemail
Am i missing something here,..?? I have set a MP3 as my incoming ring tone and the file lasts for just over 1 minute but when it is assigned as my incoming ring tone it will only ring for no more 12 seconds before registering a missed call, is there a way to increace the ring tone time before going to missed call, the damm thing has me running like mad around the house to answer before it rings off
I am sure there is a simple answer to this,,,??
As part of the phone settings there are settings for what happens after your phone rings for a length of time and also for how long your phone should ring before being diverted.
Take a look there and see if it solves your problem!!
Matt
The only options in here are "Answer incoming calls without pressing" which is not ticked and "Talk after" and i have set it for 10 rings. But because the tone is a mp3 song, it does not seem to go on for more than 10 seconds, is there another way or am i looking in the wrong place
Start->Settings->Phone->Services->Call Forwarding->"Forward phone calls only if"-> "No answer: voicemail number, Forward after: 30 seconds"
ahh man, thats great...sorted out fine..but what a daft place to put it. Would have thought it would be something obvious....must be my age..hehe Cheers
If youre device has video calling/receiving - theres a similar option accessed from the phone pad, under video call settings.
Matt
Hi !
Has somebody found some solution to reduce the delay for the ringtones for blackstone ?
I've installed the second cab here (http://forum.xda-developers.com/showthread.php?t=258109) as well as write in the registery (av0pw0r), but i can't reduce the delay under (almost) 2 ring tones, eventough i use a *.wma file.
I've also tried to play on HD tweak (1.7 option), but this does not change anything...
This is very annoying me, i've already lost some calls.
I haven"t tried yet a cooked ROM, but i wonder if this would change something
Please help
make sure the ringtone is on the phone and not card. That helped me a lot.
tks for your answer.
But well, i use (for the moment) the "Alarm-Classic.wav" under windows\rings, so i think it's ok from this side
How much delay do u have ?
hi.
using wma ringtones I get a response on my HD in about 1 ring after a soft reset. From the second call on the HD rings at about half a ring to the caller.
three rings from to wake from soft off.
but i forgot to say that if the phone is already "on", the delay is about 1/2 half ringtone, which is acceptable ! .
It seems that the additionnal delay (about 1 sec.) comes from the phone to go from "standby" to "on"
I've always had a delay with every HTC I've had (C500, C600. E650, Touch HD) using standard and custom ROMs with ringtones as WAV's and MP3's on the device and the storage card. I got used to it ages ago and if the phones on my desk can now predict an incoming call before it rings
Hi,
I was also searching for a solution on the ring tone delay issue. Guess that is a winmobile thing.
However there is no delay if you switch off the ring-tone and enable vibration mode only. That is weired behavior of the phone cause why cannot the ring-tone sound as fast as the vibration comes in vibmode only? And why does the vibration comes as late as the ring-tone when in combi-mode?
I am afraid there is no solution so far...
Regs!
this delay is something you'll have to learn to live with, unfortunately. at least in europe people seem to be finding loud and/or dodgy ringtones not very nice, and when dealing with the wiindows mobile vibrate mode is the one to go for.
another suggestion is to set up a caller tune, people are more likely to wait longer when they're listening to music.
ive found i can get it to ring at 1 ring if i turn off caller id pictures on s2u2
Yeah, the operating system does all the checks and clearing up before handling the call to prevent dropping, the way WM handles things, you can't get way from the delay, slowing the CPU with app like a nuedynamicclock worsens it. Well I notice a call before it rings if it is on
SlakerBoi said:
this delay is something you'll have to learn to live with, unfortunately
Click to expand...
Click to collapse
All my wm devices have had this issue. My blackstone lights up from sleep a good 2 to 3 sec. before the first ring. I use the old phone ring tone and have four fairly well spaced rings before vm kicks in. I just count the rings as I get to the phone and it has become a non issue. The hd tweek for it seemed not to have an effect btw. Also I'm with t-mo usa and using their code I have my ringtime set to max rings. which is 30 sec. before vm.
hi im on energy rom and set my own ringtone but problem is when someone rings it rings for about 5 seconds then the tone stops for a bit then starts again is they a tweak that can set it to just play right through thanks