After installing a lot of roms and enjoying those I reinstalled the factory rom, which actually works fine (without gps tho). Now when I try to reinstall a new rom with ruu it stops at 2-3& saying I have either the wrong ruu or not the right rom.
Starting with uspl gets me a restart with a white screen, then ruu starts but can't reconnect.
I can still activate bootloader, but the same happens there, too.
Any ideas what I can do??
Thanks
Related
Hi I have an AT&T 8525 that I have flashed with Schap's WM6 pro 4.31 lite rom. I am trying to flash back to AT&T wm6 rom but every time I run the RUU it goes to the bootloader then the next screen is a white screen that says "loading..." so I wait to see if it loads slowly but it times out and returns to the bootloader screen. I have tried flashing from the SD card but it does the same thing. I have tried to soft reset then I tried to hard reset but I still get the same message. The utility goes to an error screen saying connection error. Is there anything that I can do to get this to work?
take out your sd card and run the RUU
THANK YOU!!! The fix worked perfectly. Outstanding!!!!!!
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always
I have a cingular 8525 (Herm100) that I was running windows 6.5 on from Scotty 93.
This ROM the HTC Home version.
Recently it started hard resetting randomly and finally the last time it hard reset on its own, it became stuck in bootloader mode. Whenever I try to flash a Rom on it everything works fine and the progress bar comes up until the very end. As soon as the progress bar disappears, the Rom should boot but the bootloader just comes back up. I have HardSPL 2.10 from Olipro on it.
I looked at common bricked hermes cases and it didnt fit any of them. I have run out of ideas of what to do. Any help would be greatly appreciated.
Nevermind
wow. nevermind. I think I may have fixed it It seems like it has an internal battery or something because I had to remove the battery and let it sit for an extended period of time before it would start to boot up normally. Then when it did, I just flashed the old prerequisite ROM as soon as I could establish a connection with my computer. It seems to be working totally fine now.
my hd2 shut down twice by it self today but after second shut down the phone is not booting completely it stays on after the two boot screens, it stays on the orange windows page and not finish boot. ( 2.13 stock rom)
i did like 10 hard resets and nothing
maybe or my only solution is to flash another ROM, im thinking the 3.14 upgrade cuz i was on 2.13.
i did upgrade from 2.10 to 2.13 but my phone was on and sync with my pc (this was like 7 months ago)
i just want to know if i can upgrade to 3.14 with the phone in the three color screen boot screen or i have to do the whole hspl thing and flash a custom rom??
Flashing from bootloader is how ANY ROM flashes. Put your device in bootloader, connect via USB, and flash away!
ashasaur said:
Flashing from bootloader is how ANY ROM flashes. Put your device in bootloader, connect via USB, and flash away!
Click to expand...
Click to collapse
Big THANKS
i did flash my phone before but it was up and running but because it was an upgrade form the tmobile site the phone went to bootloader by it self and not by me so i was confused if i do it directly been on bootloader it will work but now i know
thanks again
ok, so i flashed the stock upgrade 3.14 ROM from TMOUS site but problem didn't go away, it crashed, it shutdown by it self and not turning on, not even vibrate or went to boot page it just didn't do anything , so i waited almost a day to turn it back on and the phone did turn on but i tried it in bootloader and flashed a custom ROM (BlueTopia 1.0.2 by cmylxgo) and it was working like a charm with android
BUT silly me i took the storage card out without turning the phone off and android running so when i realize i did it i put it back but phone was off and now it don't want to turn on. I'll wait like 15 min to try turn it back on and see what happens...
could it be a software thing?? i'm starting to think is hardware problem because it happened with 3 different ROMs?
does anyone had this problem before??
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!