I have successfully made my ANYCOM stereo Bluetooth headphones ( http://tuxtops.com/node/464 ) to work wtih my HTC Wizard using the "wireless stereo" instructions that were posted the other day on this forum.
When you set it as "wireless stereo", is it supposed to also switch to handsfree functionality automatically? You see, over here this doesn't happen. The music stops when I get an incoming call, but I don't get the person's voice through my headset. The headset does not switch to handsfree mode.
Is this normal? Or something else is wrong?
I connected to my headset by clicking "set as a wireless stereo". If I also click "set as a handsfree", I don't get any music you see. So, why my headphones don't automatically change mode to handsfree on an incomming call? Anyone else with this problem?
i have the same problem but it doesn't bother me.
but if there is a fix then this would be cool and easier.
A2DP support for HTC Wizard can be obtained by using this hack/tweak: http://forum.xda-developers.com/viewtopic.php?p=275506#275506
didn't try it myself, but has been reported to work on HTC Wizard and other Windows Mobile 5 devices.
CIAO!
VOODOOS!L
Any solution so far?? I will receive my Anycom BSH-100 within the next days...
I don't think there is a solution apart from praying for a new ROM.
it might be a problem with the headset and rom
did you try repairing it?
because i know everything works fine for me using itech stereo
when a call comes in, it switches no problem
Hope someone can help me with my problem (Nothing found on XDA search).
I have a BT620s headset and it works great, both for stereo music and as a handsfree set.
The problem is, if I disconnect the bluetooth or answer a call I always loose the Wireless stereo. Under the BT devices is it still shows as selected but I always have to do a refresh reselect "wireless stereo" and save it again to get it working each time.
Is there something I can do to make it stick ie: registry setting?
Thanks
confirmed
Hi to All,
i have exactly the same problem. Actually, in my case even an alarm or a reminder switches the A2DP to mono and i am not able to go back to stereo without a soft reset....
Anyone have an idea?
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
Hi there,
I'm using a Jabra BT 8040 headset with my Touch Diamond. Whenever the headset gets connected, the stereo headphones profile is activated and all the sounds from my device are routed to the headset.
I used Mortscript and a2dptoggle to create a script which activates the sound profile whenever I start the music player and deactivates it when I close the player.
This part is all working nice, BUT whenever i turn on my headset (I'm turning it off when in pocket, to avoid calling someone by accidentially double pressing the button on the headset) the headphones profile is activated again. I made a shortcut to deactivate it, but would be nice if the "auto-connect" could just be disabled somehow.
Any ideas?
- Sixfold
ps: another solution to the problem would be to deactivate the redial functionality, but I did not find any thread solving this situation. If someone knows how to stop it, please tell me
Hi all
does anyone know if there is a app that while in bluetooth sync mode with a bluetooth handsfree device could launch a switch when a incomming call comes in to give the option to select the call by bluetooth or phone or phones speakerphone? i saw this option on a iphone. if this app is not available could some maybe create one? this would be a great function for windows mobile device. i do know that there is a option after you answer the call to turn off the bluetooth but its in the menu option and not as accessable...
thanks for you help..
J
It should work simply like this on WM phones (at least on all the WM phones I have). When a call comes in:
1. If you press talk button on your Bluetooth handsfree, the call should get picked up through the handsfree.
2. If you answer the call on the phone by pressing either software or hardware button, the call is picked up on the phone.
Thank you for your reply i just have another question
will that be the same for if the phone was synced to a car bluetooth kit as well? i just want to know if so as maybe the rom i have has problems doing this...
I tried to do what is posted and it did not work for the car i answered from the hardware keys as well as the software keys and still picked up in the car. i jave to click menu then turn off hands free. is there some other option i need to select in some settings to change the way the hands free works? I will try with a blue tooth ear piece to see if there is a difference..
In looking more into this there are 2 profiles 1 is headset and the other is handsfree i believe ear pieces use the headset profile and car kits use handsfree profile i did check the earpiece and it worked as described above does anyone know how to change the handset profile? is this a reg setting or can someone tell me how these profiles are stored in winmo 6.5?