Related
Is there a registry key where we could change the green led to a blue led? I don't use blutooth much anyways so I thought I could have it flashing blue instead of green; just looks cooler imo.
Thnx=)
I don;t think this can be done; So sar no-one has been able to find a hack to disable the blue led for those who don't want it, so if we can't turn it off I suspect we won't be able to hack it to operate for anything else either - I suspect the Blue LEd is hard wired into the BT radio unit and not controlled by software at all. THat way, when the BT radio is on, so is the LED.
This certainly seems to be the situation. It is notable that when BT is enabled, the blue light flashes independently of the green/orange light.
The only solution would be to replace the LEDs, which although tricky should be quite possible.
Skip
This is funny. I'm exactly looking for the opposite: i.e. to restore my flashing led.
I don't know why and which program caused it, but my led is not flashing at all and I don't wanna hard reset.
what do those lights mean?
blue blinking = bluetooth?
orange blinking = recieved a message or call?
green blinking = radio on?
permanent blue = ?
permanent green = ?
permanent blue = ?
and whith indicator for battery and power?
thanx
well permanent orange is charging
and permanent green is fully charged
that's about all, haven't played w/ bt yet
where do we need that blink if phone is working properly?
if there is message or low bat, bt or wifi connection, thats nice to know, but no need for green light to show that there is power.
so, how to disable that? registry hack or something i suppose.
thanks,
first time posting here...
My flashing light seems to do what it want's. If it flashes the right thing at the right time it's just coincidence...
Mat.. I think he's referring to e.g. the right-side green LED flash that pops up every 2 seconds when the radio is on. It can be a wee bit annoying when you've got the thing on your nightstand - some people simply can't fall asleep ( even though they should close their eyes, after which they can't see it anymore )
What does the orange light mean? It seems to change to orange whenever it wants!
afaik...
Left LED:
Green, Flashing slow (2s): WiFi on
Blue, Flashing slow (2s): BlueTooth on
Right LED
Red, Flashing quickly (1s): Battery nearly empty
Green, Flashing slow (2s): Radio on
Green, On: Fully recharged
Amber (orange), On: Recharging
Amber (orange), Flashing quickly (1s): Notifications (Alarm, SMS, MMS, etc. depending on settings)
Can you please tell me how many LED's are on Trinity and what kind of missing calls, messages notifications are present, hopefuly via LED which rapidly changing colors?
In the manual it says:
Left LED:
This LED shows the following:
• A blinking Blue light for Bluetooth system
notification of powered-up and ready to transmit
radio frequency signal.
• A blinking Green light for Wi-Fi status.
• When both Bluetooth and Wi-Fi are enabled, their
lights blink alternately.
Right LED:
This (bi-color) LED shows Green and Amber lights
for UMTS/GSM standby, UMTS/GSM message,
UMTS/GSM network status, notification, and battery
charging status.
Click to expand...
Click to collapse
so, when I miss phonecall or sms this right LED will notify me by changing lights all the time until I confirm event, how visible it is? It is very important to me that just by looking at phone I know I have something to check.
Took me a while to check, but here it is:
When charging, the right LED will show a steady amber light, it turns steady green when fully charged. When not charging, the right LED will blink green to indicate GSM reception.
When you have recived a sms, or a call, which you didn't answer, the right LED will, whether it is charging or not, start to blink amber until you have read the sms, or have seen the incoming number.
So in short, blinking amber right LED is either a missed call, or sms.(probably mms too)
That's it, I'm planing to buy this wonder and your input is very helpful, thank you very much!
I used to have on my old iPAQ a BT indicator next to the G/U sign on the top line. Now I only have a dark, barely seen indicator in phone screen (which is so dark it self I can't see the indicator). Any ideas for a more visible indicator on the today screen?
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck