When PocketCM keyboard 9 was done installing, I tried to load it and it says" This version of pcmKeyboard can't be run after 09/15/2007. Please go to http://www.pocketcm.com to get an updated version."
So I go to the site and re-install the program and I get the same message.
Does any one have the same problem? or
Does anyone know how to fix this problem?
Thanks,
Michael
Yeah Me too..Why?
anyone???
have a solution to this?
thanks.
I change the date to solve it..
There
Must be another way to do fix. Changing the date wold be annoying.=/
Yeah it would be anoying
Did you completely uninstall previous version before installing it?
I uninstalled the previous version and reinstaled v0.9 and still the same message. On the PCM site it says "Please note however: it's currently a time limited test release, you'll have to update after 10/01/2007 with a newer version." Looks like the kill date might have been programed in wrong? I even tried installing v0.8 and got the same message however.
I don't think so, as quite a few people are using it absolutely OK (including me). Maybe you'd be better off posting this on the developer's website forum?
http://pocketcm.com/phorum/index.php?9
or in the PCM Keyboard thread here
http://forum.xda-developers.com/showthread.php?t=321712
just in case this thread doesn't catch Tene's attention
Hope you get this sorted out.
just a quick fix... temporary only!
set your date before 9/15/07 or day 15 or 14. then install sipchange. select pocketcm keyboard from sipchange. set date to present.
nesty24 said:
just a quick fix... temporary only!
set your date before 9/15/07 or day 15 or 14. then install sipchange. select pocketcm keyboard from sipchange. set date to present.
Click to expand...
Click to collapse
Uninstall, soft reset, check that pcmkeyboard.dll doesn't exist.
Install 0.9b (just published), to make sure you're running 0.9b check in the option dialog the version number. (if no version number appear, it's not 0.9b)
Should be fine until 10/01/07
If you're limited to 09/15 it's definitely that you got a previous release.
tene said:
Uninstall, soft reset, check that pcmkeyboard.dll doesn't exist.
Install 0.9b (just published), to make sure you're running 0.9b check in the option dialog the version number. (if no version number appear, it's not 0.9b)
Should be fine until 10/01/07
If you're limited to 09/15 it's definitely that you got a previous release.
Click to expand...
Click to collapse
I tried this, but can't remove the pcmkeyboard.dll file....
well after reset, and installing 0.9b it apperently wasn't needed. It works again now!
thanks
Patrick
I wonder, why all versions of PCM Keyboard apparently are timebombed in the first place. I haven't seen this very often - if at all - here at xda-developers. I think, updating should be an option, not forced.
paranoid2007 said:
I wonder, why all versions of PCM Keyboard apparently are timebombed in the first place. I haven't seen this very often - if at all - here at xda-developers. I think, updating should be an option, not forced.
Click to expand...
Click to collapse
Yeah, this is right!
Related
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
just for info... thread exists already in the "applications area"
regards jan
Edit: This opera version seems to have other severe issues thought (see next two posts), so be careful/do a backup before installing.... especially as it seems to be not un-installable
I have the problem, that the screen does not auto-rotate in this version!?
Is there any setting for that? Or another version, that works with screen-rotation on the HD?
bill340 said:
I have the problem, that the screen does not auto-rotate in this version!?
Is there any setting for that? Or another version, that works with screen-rotation on the HD?
Click to expand...
Click to collapse
I have more than one issue with that build... first of all, the installation finished with "unsuccessful" report, but the new version was installed anyway (but maybe not correctly (?))... i've got the following issues:
1.) The one above, auto screen rotation doesn't work... could be solved with gsen or gyrator however, i suppose
2.) Opera always starts automatically after each soft reset, I haven't found any registry or autostart entries on that
3.) I don't know how to uninstall it, as it's not listed in the "installed programs" list...
Any solutions for these issues?
regards jan
hausen said:
I have more than one issue with that build... first
2.) Opera always starts automatically after each soft reset, I haven't found any registry or autostart entries on that
Click to expand...
Click to collapse
Solved: Just go into the registry and delete the folder: HKCU\Software\HTC\BootLauncher\Apps\Opera9
Good morning
I've installed Swype 3.9.10.10.5032 and when I go into settings, input and select swype instead of touch input it won't stay selected. Is there a way round this as I just can't get Swype to work?
rom version: 1.66.405.2 (76641)WWE (HTC Official)
OS: 5.2.21869
Manila: 2.5.19211619.0
Network: Vodafone UK (phone is not specific to network operator)
Will appreciate any advice/help
Regards
Have you selected it from the keyboard screen? I have both Swype and SlideIT installed and I just choose between which one I want to use via the keyboard button when texting/e-mailing/web browsing. And it stays selected, give it a go.
If not, try to uninstal and reinstall?
pridefc said:
Good morning
I've installed Swype 3.9.10.10.5032 and when I go into settings, input and select swype instead of touch input it won't stay selected. Is there a way round this as I just can't get Swype to work?
rom version: 1.66.405.2 (76641)WWE (HTC Official)
OS: 5.2.21869
Manila: 2.5.19211619.0
Network: Vodafone UK (phone is not specific to network operator)
Will appreciate any advice/help
Regards
Click to expand...
Click to collapse
try this it is working for me, just select in the program and it should be good for you...
Kalavere said:
Have you selected it from the keyboard screen? I have both Swype and SlideIT installed and I just choose between which one I want to use via the keyboard button when texting/e-mailing/web browsing. And it stays selected, give it a go.
If not, try to uninstal and reinstall?
Click to expand...
Click to collapse
Ah never noticed the upwards facing arrow before to select different keyboards (stupid me). Once I select swype it says "Open of English US failed!". Once i click on okay the phone goes really slow and the swype logo is in the bottom but no keyboard is shown. If I press on the swype logo nothing appears. Any suggestions on how to load the US keyboard or preferably the UK one?
pridefc said:
Ah never noticed the upwards facing arrow before to select different keyboards (stupid me). Once I select swype it says "Open of English US failed!". Once i click on okay the phone goes really slow and the swype logo is in the bottom but no keyboard is shown. If I press on the swype logo nothing appears. Any suggestions on how to load the US keyboard or preferably the UK one?
Click to expand...
Click to collapse
That happened when I deleted Swype from my Energy ROM, I am guessing it is displaying it because it doesn't have the language pack installed.
Uninstall and reinstall see if it helps.
I uninstalled and reinstalled and still getting the same issue. Any thoughts? I really appreciate the help
pridefc said:
I uninstalled and reinstalled and still getting the same issue. Any thoughts? I really appreciate the help
Click to expand...
Click to collapse
Do you get an error when you soft reset? I had an issue about a language pack pop up before WM had even loaded when I managed to mangle my copy of Swype.
yeah still getting the error when I soft reset. I'm assuming that a hard reset is in order then?
pridefc said:
yeah still getting the error when I soft reset. I'm assuming that a hard reset is in order then?
Click to expand...
Click to collapse
It shouldn't be, as you're on an offcial ROM, if it was cooked in as mine was that would be the way to go. You should be able to uninstall and you're good to go. But I suppose if you can't seem to get rid of it it might be the only suggestion I have.
However don't just take my word for it, I am sure someone else must be able to help you.
I would however suggest giving Dasur SlideIT a go, you can try the demo or buy the full version for $8/£5. http://www.dasur.co.il/Product/SlideIT/WindowsMobile/download.php Imo it's a much better keyboard, takes a bit if getting used to but I love it now.
well I've been putting off trying new roms because I needed to backup, so I think I will backup and try a cooked rom and see if I can get swype to work and will also try SlideIT
pridefc said:
well I've been putting off trying new roms because I needed to backup, so I think I will backup and try a cooked rom and see if I can get swype to work and will also try SlideIT
Click to expand...
Click to collapse
If you're gonna hardreset you might as well flash a custom ROM while you're at it for sure.
If youre using swype from a cooked rom i would of thought it would run ok but Swype as good as it is does have probs (v2.0, 3.9 that is). Its a common prob in regards to the us dictionary error and functions not running properly like pressing a key for the alternate character not working.
I use slideIT and swype from the Omnia, works much better, faster, sure they keys are a bit smaller but the press for alternate character always works etc.
Proportionally scaled
http://www.multiupload.com/JLYJXGUV0O - multilanguage
http://www.multiupload.com/W3DN2G8UY6 - only english en/us
More info on my blog:
http://marurban.netii.net/?p=95
I tested it on my HTC Wildfire. If someone test, please write if it works.
Isn't this warez?
EDIT: Tested, works for a few seconds, then FCes. Would be great if it worked, as I don't think the official Swype supports QVGA. What is LS fix?
Tattoo has a QVGA resolution, I tested it on Wildfire in the official version does not work landscape mode.
LS = Landscape
If on (tattoo) the official version works in landscape mode please delete the topic.
Well, your version doesn't appear to work at all...
Where can I get the original version to test? From market?
sadly i tried it and it force closes
Maby this help:
1. Delete current ver
2. Reboot phone
3. Install SWYPE
Marurban said:
Maby this help:
1. Delete current ver
2. Reboot phone
3. Install SWYPE
Click to expand...
Click to collapse
I'm trying this right now. I also tried the version without LS fix (with PT fix) and that FC as well, so the problem isn't in the LS fix.
EDIT: No luck Would be great if someone got this going...!
Hi. I have a problem.
I installed swype, then I went to settins> regional settins & text> In text settins check SWYPE box, but when I need the keyboard always is showed the native one.
What is it wrong?
osvaldoll said:
Hi. I have a problem.
I installed swype, then I went to settins> regional settins & text> In text settins check SWYPE box, but when I need the keyboard always is showed the native one.
What is it wrong?
Click to expand...
Click to collapse
tap and hold on any text field and tap on "input method". Then choose swype.
_david_94 said:
tap and hold on any text field and tap on "input method". Then choose swype.
Click to expand...
Click to collapse
Thanks. But I have an other problem. I choose Swype, then the Keyboard is diplayed during a second, suddenly some swype help boxes are displayed and at last Android say that the program must be closed.
osvaldoll said:
Thanks. But I have an other problem. I choose Swype, then the Keyboard is diplayed during a second, suddenly some swype help boxes are displayed and at last Android say that the program must be closed.
Click to expand...
Click to collapse
We all have the same problem: read the rest of the thread.
Install this ver. http://www.multiupload.com/HF7FGXI5HT if it will work i add ls fix.
This one just gives me wrong resolution error, doesn't even start.
I have the same problem with the resolution
Worked _____ on my U8100. Are you sure this isn't w___z? Is this time trialed? It's unbelievable. Landscape works great too.
Edit: This isn't the Tattoo so don't hold your breadth.
work on htc wildfire
IMPORTANT:
If you are having issues with the lockscreen settings or selecting the theme color, make sure all your language cabs have been updated.
This is usually caused by missing a langauge cab
Click to expand...
Click to collapse
Like title says: WP7.8 is out, has anyone gotten an update, without installing via cabsender?
The important question is if there are any oem updates out, and if there are if anyone can capture their urls.
Edit: my install history: shipped with 7720 -> manually updated to 8773 -> manually updated to 8858, it installs and seems to be working fine with 7720 drivers.
Need to test more thoroughly though, but it installed and boots.
TheManii said:
Like title says: WP7.8 is out, has anyone gotten an update, without installing via cabsender?
The important question is if there are any oem updates out, and if there are if anyone can capture their urls.
Edit: my install history: shipped with 7720 -> manually updated to 8773 -> manually updated to 8858, it installs and seems to be working fine with 7720 drivers.
Need to test more thoroughly though, but it installed and boots.
Click to expand...
Click to collapse
Kid1988 mentions that hi has updated his here:
http://forum.xda-developers.com/showthread.php?p=37391016#post37391016
Will update here if i find any info you ask for when trying with mine DVP.
unubtanium said:
Kid1988 mentions that hi has updated his here:
http://forum.xda-developers.com/showthread.php?p=37391016#post37391016
Will update here if i find any info you ask for when trying with mine DVP.
Click to expand...
Click to collapse
Tried updating using the force update method, Zune came back with "Update ready for 7.10.8779.8", which I tried to update to, but then during the backup the update failed. I'm pretty sure the 7.10.8779.8 is a Nokia only update, but I am not sure.
Will try updating again over the next few days, see what happens.
MrAdelphi02 said:
force update method
Click to expand...
Click to collapse
Let me know how and i will try on my one, have an extra with broken touch input that I am more than happy to use to test on even if it was a "nokia" only update
8779 is a generic update, and it always has been.
It was simply not released widely and noone bothered to leak the update urls.
You have to upgrade though 8779 to get to 8858, everyone that recieved updates to 8858 did so
TheManii said:
8779 is a generic update, and it always has been.
It was simply not released widely and noone bothered to leak the update urls.
You have to upgrade though 8779 to get to 8858, everyone that recieved updates to 8858 did so
Click to expand...
Click to collapse
HUmm. what about my one stuck on 8773.98 if yo know?
And also something about to be able to check your DVP "version" you mentioned 00EU/00US is the no branded ones in this thread:
http://forum.xda-developers.com/showpost.php?p=35565456&postcount=5
Now where is this one the phone??
ive updated it half an hour back...seems faster than 7.5...
unubtanium said:
Let me know how and i will try on my one, have an extra with broken touch input that I am more than happy to use to test on even if it was a "nokia" only update
Click to expand...
Click to collapse
"Simply open Zune and go to the Settings. Now instead of just clicking on the 'Update' button and waiting, what you need to do is disconnect your computer from the internet while Zune is still checking for the update. You need to do this about 3-4 seconds after you see the 'Checking for Updates' progress bar pop up. It may take a few tries, but eventually it should work."
http://www.windowsphonedaily.com/20...s-phone-78-update-yet-plus-how-to-get-it.html
Just updated unlocked T-Mobile Dell Venue Pro using Cab Sender method. Worked like a charm!
IT WORKED!!!!
My backup was taking too long on the force update method, so I deleted all my music and videos and some of the apps, then had to perform the force update method 3 times, and the last update was 7.8!!
MrAdelphi02 said:
IT WORKED!!!!
My backup was taking too long on the force update method, so I deleted all my music and videos and some of the apps, then had to perform the force update method 3 times, and the last update was 7.8!!
Click to expand...
Click to collapse
I updated using cab sender method, and it worked like a charm. However, as I notice, a contact still miss the entry of "Mobile 2" (unlike Windows Phone 8). Do all of you think it's as intended to miss this entry?
chacona said:
I updated using cab sender method, and it worked like a charm. However, as I notice, a contact still miss the entry of "Mobile 2" (unlike Windows Phone 8). Do all of you think it's as intended to miss this entry?
Click to expand...
Click to collapse
What does that mean? I dont use my VP as a primary.
Do you mean that for a contact with 2 stored phone numbers it doesnt allow you to enter it/it doesnt pick it up when searching/something else?
TheManii said:
What does that mean? I dont use my VP as a primary.
Do you mean that for a contact with 2 stored phone numbers it doesnt allow you to enter it/it doesnt pick it up when searching/something else?
Click to expand...
Click to collapse
Hi Manii, in Windows Phone 7.8, you're able to save a contact with
Mobile
Home
Home 2
Work
Work 2
Company
Pager
Home fax
Work fax
However, on Windows 8 you have one more field: Mobile 2. The shortcoming from Windows 7.8 is, once one of my friend has more than 1 number, I will have to store the second one as "Home", not "Mobile 2" and this number can not be texted directly (SMS).
We can workaround it, however stock support is better for sure!
RReverser said:
Just updated unlocked T-Mobile Dell Venue Pro using Cab Sender method. Worked like a charm!
Click to expand...
Click to collapse
Hey Rreverse can you explain how you do the cab method? I'd love to force update my phone.
Thanks
chacona said:
Hi Manii, in Windows Phone 7.8, you're able to save a contact with
Mobile
Home
Home 2
Work
Work 2
Company
Pager
Home fax
Work fax
However, on Windows 8 you have one more field: Mobile 2. The shortcoming from Windows 7.8 is, once one of my friend has more than 1 number, I will have to store the second one as "Home", not "Mobile 2" and this number can not be texted directly (SMS).
We can workaround it, however stock support is better for sure!
Click to expand...
Click to collapse
You're right about that: I can confirm that mobile 2 is strangely missing, WP7 itself simply does not support it.
You can add "mobile 2" via the win8 people app or the the people section of live.com and it simply does not appear.
MS/Live accounts simply are not able to handle custom labels on fields period, if you're like me and use gApps as your primary account source and have custom labels: they simply do not appear at all via live connected apps (wp7/win8/live.com).
You would need either to be less descriptive or have multiple entries to replicate the same thing via live accounts.
You cant even manually create a "mobile 2" label and expect it to show up under wp7.
You would need to completely bypass live accounts to add custom fields, it's an inherent limitation of live.
That or live with the fact you would simply have no way of syncing at least that to live.
MrAdelphi02 said:
"Simply open Zune and go to the Settings. Now instead of just clicking on the 'Update' button and waiting, what you need to do is disconnect your computer from the internet while Zune is still checking for the update. You need to do this about 3-4 seconds after you see the 'Checking for Updates' progress bar pop up. It may take a few tries, but eventually it should work."
http://www.windowsphonedaily.com/20...s-phone-78-update-yet-plus-how-to-get-it.html
Click to expand...
Click to collapse
Aha, so the good old pull the cable trick strikes again.. :fingers-crossed:
Will try now
Plazma1 said:
Hey Rreverse can you explain how you do the cab method? I'd love to force update my phone.
Thanks
Click to expand...
Click to collapse
If you're already on Tango (8773), just download these CABs: http://forum.xda-developers.com/showpost.php?p=37384687&postcount=1478, repeating procedure separately for each update pack. Actually, I always used English (US) language, so downloaded only corresponding packages:
For first update downloaded:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8773.98-7.10.8779.8-armv7-retail-microsoft.pks_b9598a098a3a4e902d043cef778a79ff3e6b0869.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8773.98-7.10.8779.8-armv7-retail-microsoft.lang_0409.pks_4d87f62a11c7898a516df7563a9333e1082fad57.cab
And installed using CAB Sender (for instructions on using it, look at this post).
Then, did the same for two other update packs.
Second one:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/10/diff-iucorefixed-7.10.8779.8-7.10.8783.12-armv7-retail-microsoft.pks_8a50b92b21951c7baf9f3600cea8c77e0918021f.cab
Third one:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.pks_d6fb2a271eed6a5d1187b17aba60806753d0ffce.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.dpi_262.pks_39b9cc884c90d83c0df50ed5623166e9257d1162.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.lang_0409.pks_653898f93f54d951992766d317db1b846ca71e36.cab
Of course, if you use other language than English (US), you will need other lang packs from each update as well (notice *lang_0409* in package names here).
After installing 3rd update pack, you will be successfully running Windows Phone 7.8.
Good luck!
RReverser said:
If you're already on Tango (8773), just download these CABs: http://forum.xda-developers.com/showpost.php?p=37384687&postcount=1478, repeating procedure separately for each update pack. Actually, I always used English (US) language, so downloaded only corresponding packages:
For first update downloaded:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8773.98-7.10.8779.8-armv7-retail-microsoft.pks_b9598a098a3a4e902d043cef778a79ff3e6b0869.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8773.98-7.10.8779.8-armv7-retail-microsoft.lang_0409.pks_4d87f62a11c7898a516df7563a9333e1082fad57.cab
And installed using CAB Sender (for instructions on using it, look at this post).
Then, did the same for two other update packs.
Second one:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/10/diff-iucorefixed-7.10.8779.8-7.10.8783.12-armv7-retail-microsoft.pks_8a50b92b21951c7baf9f3600cea8c77e0918021f.cab
Third one:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.pks_d6fb2a271eed6a5d1187b17aba60806753d0ffce.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.dpi_262.pks_39b9cc884c90d83c0df50ed5623166e9257d1162.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/11/diff-7.10.8783.12-7.10.8858.136-armv7-retail-microsoft.lang_0409.pks_653898f93f54d951992766d317db1b846ca71e36.cab
Of course, if you use other language than English (US), you will need other lang packs from each update as well (notice *lang_0409* in package names here).
After installing 3rd update pack, you will be successfully running Windows Phone 7.8.
Good luck!
Click to expand...
Click to collapse
Will this work for DVP TMO-US. I am currently at 7.10.7720.68? Thanks
TheManii said:
You would need either to be less descriptive or have multiple entries to replicate the same thing via live accounts.
You cant even manually create a "mobile 2" label and expect it to show up under wp7.
You would need to completely bypass live accounts to add custom fields, it's an inherent limitation of live.
That or live with the fact you would simply have no way of syncing at least that to live.
Click to expand...
Click to collapse
Sadly said, it's true! :crying:
JurajD said:
Will this work for DVP TMO-US. I am currently at 7.10.7720.68? Thanks
Click to expand...
Click to collapse
ya it works, I got my Tmobile DVP up using the cab sender method to 7.8.
Someone wanna comment on the firmware for the bootloader/radio etc?
Here are my Specs:
OS: 7.10.8858.136
Firmware: 2250.1800.7720.219
Hardware: 112.576.2.0
Radio: 2.2.50.18
Bootloader: 7.27.1.0
To be honest I feel that 7.8 made the device slower for me. 7.5 Mango was much faster. Just my experience.