Database Users

GPRS Monitor

I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?

Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.

No problem thanks for your help

dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz

Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.

Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.

It works a treat. Thanks muchly!

Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:

I also managed to 'locate' another copy and it works fine, thanks for all the help.

astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.

Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?

Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!

sorry ignore that post! Work computer blocked the file out

I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.

Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob

Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.

Tried it. Still get the problem :-(

My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.

Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.

I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.

Can't Install

Pls pls pls help
can't install anything anymore on my VArio II
can't sync with activesync either, whatsup

If you want help then something a little more detailed might help.... does it produce errors?!? what are the error messages, etc... it would be like telling your docter over the phone that you dont fell good... unless your doctor is psychic then he cant diagnose your problem without more information..

More Info As Req
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!

rickyjune said:
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!
Click to expand...
Click to collapse
Hi Rickyjune
I don't know anything about security wallet - perhaps it's one of those things that locks up your files and applications, but without knowing about it I cannot guide you through a fix.
I assume you do not have a backup taken before you installed it? or even whether you can access them if you have? (This would be a solution perhaps if you have)
I'm not sure whether your applications are all working or disappeared or locked or what exactly. Sadly if it's in a real mess, I can only suggest a hard reset that obviously will remove everything back to the way you first got the device Would obviosly mean re-installing all your customisations and programmes you've added. It's either that or wait to see if anyone with security wallet helps out. Does security wallet have a help line or e-mail support etc.
Mike

more info
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list

rickyjune said:
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list
Click to expand...
Click to collapse
Ok I'll do some checking but I may not get far. See if you can get in touch with them.
Mike

Hi
I'm not sure this is the right one Flexwallet without an "i":
if it's the right one I see you can contact them or use the webis forum:
http://www.pocketinformant.com/Forums/index.php?showtopic=10016
http://www.webis.net/support.php
http://www.webis.net/whatsnew.php?type=FW2006&version=509&Product_Version=FlexWallet%202006%20Rev%203
Mike

Its The Right One But
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything

rickyjune said:
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything
Click to expand...
Click to collapse
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike

mikechannon said:
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike
Click to expand...
Click to collapse
I can attest from experience that the only solution (at least that I've found) is a hard reset and rebuild or restore from backup.
My program list frequently disappears, recently twice in one day. I'm still looking for a solution to the problem, which is how I discovered this thread. I can't find a pattern and tips that I have received (my list is under a supposed limit of 50 and all of my Today screen programs are now moved to main memory) haven't panned out.

yep hard reset was the only way
Your rite DonB, i had to hard reset and install everything
wasn't pretty, but I have sprite backup now but I've had no problems and i've installed Flexiwallett
cant understand what went wrong

Urgent Problem, Blue Angel Freezes

I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP

read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri

baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin

I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...

Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?

joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...

it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.

well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all

xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz

Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5

thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz

KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....

OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )

BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.

Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas

OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$

I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.

remove program problem from mogul

damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution

I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org

I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck

I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help

There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....

Me too.
I just hard reset. After reading everywhere, this was the only option.

i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.

saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.

JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks

No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!

[Q] Blue screen, HTC sence crashed.

Good evening.
My HTC crashed. this is the six time now..
So let me tell you what's the problem, hopefully you guy's can help me.
This happend last time:
I was typing an sms and after a while i tilt my mobile to landscape mode.
After doing this my mobile wouldn't return in normal screen mode.
so i soft rest my mobile.. not so smart move.
the text sounds: "tap here for loading HTC sence".
If i tap this it says: "HTC sence loading" but it will return to: "tap here for loading HTC sence".
I cant go into my startscreen so doing anything isn't an option.
Well i soft reset like 5 times and 3 times i yank the battery out while booting but it will ceep telling me the same thing...
My phone: HTC touch HD.
The rom i use: kwbr topix version 3.6
mmm i can't put an link in this post so the thread is: showthread.php?t=460640
So if anyone has an idea for me. that would be great!
I haven't done a hardrest before and I instald my ROM 5 times before now..
Thanks anyway.
Leek.

if just sense isn't working there's no problem, just backup your pim data and any other important files (pictures...) and hard reset the phone.

So if I take all my files from my SD-card and copy them to my PC (or take my SD-card out of my phone) and preform a hard-reset, then is there a chance that my phone will be alive again?
And a question:
A hard rest can be done by: pressing both volume button's and the powerbutton?
Thank you very much!

a hard reset does not affect the contents of the sd card, but the entire internal storage, meaning the space, where "\My Documents" and other folders are located, including all your contacts, messages...
you should sync your pim data (contacts, tasks, appointments...) either with outlook (that does not save your sms!) or with MS myphone (saves all) or pimbackup (saves all) and save your ringtones and possible photos stored internally, you can backup those files either with ms myphone as well or just copy and paste them to the storage card.
also, remember, a hard reset will delete all the programs installed and their respective settings, so keep your needed cab files present.
setting up the device after the hard reset will take some time, keep that in mind, but if you actually never performed one before, you will realise a huge improvement in speed.

Ok thank you very much.
I will preform a hard reset tonight so I can use it soon again ^^.
The data standing on my internal storage isn't usefull anymore. It's already on my pc so when I get home, I'll hard reset it right away!
Speed improvement is alway's welcome!
I'll let you know if my phone works again.
Thanks.

Wauw it worked perfectly!
The hard rest of my phone took only a minut, so that was far much better then installing the ROM over and over again!
Thanks for your advice.

yes, reflashing the rom does not really change anything, as long as you don't hard reset after flashing. to keep ypur phone clean and fast and not pollute it with old trash, always perform a hard reset after flashing. it is highly recommended when changing roms, and when staying on the same one, a hard reset can solve nearly any software related issues that appear over time

New problem...
My phone is acting weird again..
The problem is the startup now.
It takes around 5 min to get to the home screen.
but when you think its finaly started, then there appears an error:
Run FILEOP
\windows\Menu_FILEOP_Operator.txt
faild.
What can i do about this?
Hardreset again?
(this would be my 13th time that my phone crashed... i'm becomming crazy..)
can anyone help me with this?
Greets,
Leek1001

1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun

dilqnski said:
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
Click to expand...
Click to collapse
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001

Task 29 format the main memory of the PPC. Read the topic for more info. From my experience it make wonders

leek1001 said:
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Click to expand...
Click to collapse
Follow the f***ing link and read the thread. You'll find all the answers there!

motionz said:
Follow the f***ing link and read the thread. You'll find all the answers there!
Click to expand...
Click to collapse
Thank you for reading my entire post instead of the first line....
I say that I don't know what the problem is and nobody gave me an answer. task29 could fix my problem but I still don't know the exact problem...

motionz said:
Follow the f***ing blah blah blah
Click to expand...
Click to collapse
Pr1k...
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..

raving_nanza said:
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
Click to expand...
Click to collapse
I've tried a reflash and afterwards a hardreset but didn't workout.
I'm following the topic about task29 now
I'm going to try it this weekend. thanks.

Well it worked out perfectly!
for everyone having troubles with the ROM's of Kwbr try to update your radio rom version!
I had 1.09 and now I've version 1.17.
men.. if I had done that earlier!
Greets,
Leek1001

...
glad you got yourself sorted dude..