Related
hi everyone , i am looking for an application to turn on flash light at the of wizard so i can use it for example to see key hole of the my main door in the dark
any one has any info? i belive vijay555 can create one?
nolovelust: man, you have to check if anyone has asked this question before, and you really shouldn't say stuff like that about me!
I believe I can make one as well, but there's a lot of incredible guys on here, and I'm an insignificant beginner, so it's disrespectful to the others :wink:
I have done some work on the flash. I'll be posting some info shortly, most likely failure, but with a way to achieve success. I'll clarify soon.
V
sory about that i didn't mean to be rude to anyone and search option of phpBB is a bit unusefull when you search more than one words you need to know almost exact topic name ( or am i doing something wrong? )
Yeah, it's useless with boolean searches. I've found it more helpful if you tell it to show posts, not topics.
Basically, AFAIK, it's not been achieved yet. But I know it can be, and I've done some work on it. But being nearly there isn't the same as being there, so no, I haven't done it yet. But...
V
Guys, as of 3am yesterday I managed to control the flash, so I've made the torch app for the Universal.
http://forum.xda-developers.com/viewtopic.php?p=226383#226383
I'll report back shortly, but there is flash light on the back of the wizard, right? I will start checking if I can write this for the wizard as well.
<cheeky mode>
If anyone has a spare Wizard available (IMEI blocked is fine, I need the hardware only), a donation would aid development immensly :wink:
</cheeky mode>
V
Yep, there is a flashlight on the back of the Wizard.
John
vijay555 - you could just have a Wizard owner try the code you're using on the Exec? Chances are it's the same driver/etc. (IA Camera)
ZeBoxx: I'm sure it's likely to be the same code, but curiously the hard reset code wasn't the same between these devices. There's different mechanisms required to hard reset a Universal and a Wizard. I'm going to try to rip a rom from the FTP and have a look. There are several apps I need to investigate for several slightly overlapping hacks I'm working on.
Also, the different processors require a different treatment with some of these hacks... but if I get to that position, I'll shout out for a wizard beta tester. I'll have to try to get hold of one briefly to try out an app or two... off to the O2 shop to "demo" one
V
Guys, on my website I've posted VJCandelaLite 0.2 beta. This is hopefully Wizard compatible, but I can't test it since I don't have one. Someone brave, please give it a go and report back
Thanks!
V
No go on wizard - details in:
VJCandela - torch/flashlight on HTC Phones - http://forum.xda-developers.com/viewtopic.php?t=41642
*THIS "PROJECT" IS CLOSED ON MY PART!*
If you wish to still follow this, please visit the below link, I believe alquimista and some other folks are still giving this a try.
http://pdaphonehome.com/forums/samsung-sch-i760/108112-sch-i760-rom-r-d.html
Samsung SCH-i760 ROM
**UPDATE 03/10/08**
I have found some useful tools to help me accomplish this, but still have some things left to find. Any help would be awesome, first I need a way to find what I can remove (useless files that take up space) and most importantly where I should to start to make this work. I'm pretty sure the forums will be closed later today, so if you could email if your able to assist me I would appreciate it!
What do you think?
Hey everybody, I've been browsing this forum numerous times in the past couple of weeks looking to customize my i760 and haven't found much on it for upgrading it's performance. It seems that not many users have this phone, so I'm thinking of creating a ROM for this device.
It will probably take me some time, being this will be my first time creating anything for a PPC.
I'm asking for some help for this:
a) From fellow i760 users to get some input on what might be the best items for the ROM.
b) Also from advanced users on the best way to approach this creation.
All help will be very much appreciated.
I'd like to have some contribution to this forum, seeing how my phone has been completely customized from developers on this site. Big Thanks to all of you out there whos software I am using! You all have done a great job, I appreciate your time and hard work for it.
What are your all's thoughts on this?
Thanks in advance.
Any question you can email me @ jtisr241 @ aim dot com.
TheChampJT said:
Samsung SCH-i760 ROM
What do you think?
Hey everybody, I've been browsing this forum numerous times in the past couple of weeks looking to customize my i760 and haven't found much on it for upgrading it's performance. It seems that not many users have this phone, so I'm thinking of creating a ROM for this device.
It will probably take me some time, being this will be my first time creating anything for a PPC.
I'm asking for some help for this:
a) From fellow i760 users to get some input on what might be the best items for the ROM.
b) Also from advanced users on the best way to approach this creation.
All help will be very much appreciated.
I'd like to have some contribution to this forum, seeing how my phone has been completely customized from developers on this site. Big Thanks to all of you out there whos software I am using! You all have done a great job, I appreciate your time and hard work for it.
What are your all's thoughts on this?
Thanks in advance.
Any question you can email me @ jtisr241 @ aim dot com.
Click to expand...
Click to collapse
I had the i760. I got rid of it because of the lack or roms.
And Your are right there are no roms out there, its not because people dont have it, but its something with the way Samsung makes their roms. It's not as flexible with as the HTC devices.
Thanks for the info, I still have a ton of research to do before I look into the development, I'll keep that in mind hopefully I can find a way around it.
hey help for all phones would be cool
spring777 said:
hey help for all phones would be cool
Click to expand...
Click to collapse
I'm not sure what compatibility the ROM will have, another thing I'm learning.
I would love to see a rom that does not include the d-day and all the get it now and vzw branded software there under WM6.1 with the threaded MMS of 6.1 and the Palm threaded SMS. But, that is just a pipe dream, so I will settle for just a software update.
Thank you for your effort sir.
spring777 said:
I would love to see a rom that does not include the d-day and all the get it now and vzw branded software there under WM6.1 with the threaded MMS of 6.1 and the Palm threaded SMS. But, that is just a pipe dream, so I will settle for just a software update.
Thank you for your effort sir.
Click to expand...
Click to collapse
Any idea on when the update wil be available? Hopefully I can incorporate this with the new files on the update.
i have the i760 and yeah I think this would be a good thing but samsung just does stuff differently with ROMs
here to help
byrnsey88 said:
i have the i760 and yeah I think this would be a good thing but samsung just does stuff differently with ROMs
here to help
Click to expand...
Click to collapse
Thanks, that's what I hear, hopefully once I figure out all the odds and ends to ROM's I can better understand how this is configured.
I second the vote for a rom that does not have the "extra" garbage including that useless picsel browser thing. An end button deactivator (comes in handy to "accidentally" hang up on the wife, but most of the time it's a pain in the ass), a built-in S2U2-like app, built-in touchscreen inteface (ifonz-like I guess). Overclocking.
Overall better memory use, power use, touchscreen use, end deactivator (tried AE, it hated my i760!!)
Update: Oh you know what I'd really like to see - one touch access to contacts, then particular category. The thing I miss most from my cell phone is pressing one button which calls up MY contact list, not the thousands of contact in Outlook. So to recap press a soft key, get the personal contacts list category.
what is the good word?
yea there's def. not a ton of support for the i760; but i've heard that there will be an update to wm6.1 for it so that should satisfy alot of us owners if its true
I hope theres a 6.1 Rom!!
I hear there is and Verizon will have it for download for the i760 on there web site when they finish there part of it.
JASTECH said:
I hear there is and Verizon will have it for download for the i760 on there web site when they finish there part of it.
Click to expand...
Click to collapse
Do you know when it will be completed?
760 for High speed Internet Bluetooth connection
Hey does anyone have any luck using the 760 as a celluar modem? I am using PDANet to open the profile and I connect without issue but I can only stay connected for a very short time usually less then one minute.
I have also been all over this site and I am looking for a ROM and there does not seem to be much of anything available for this device. Has anyone had any success with the ROM or any update that would let me use this device reliably with my laptop. I am not sure if it is Verizon or a setting on the phone but it is killing me.
Thanks for any suggestions.
Todd
I just ordered a i760 so i can help.
i say no iphone interface, its not that good i dont see why people want to copy it.
Alright, it seems there won't be an update anytime soon from Verizon, so I'll try to get something accomplished here, it seems all I do is work sometimes. Anyways, I'm still messing with apps and plugins to see what I want to build here. As soon as I can figure which I want I'll post the news.
Any suggestions on what should be included?
**SEE FIRST POST**
i760 Rom Dump
@ TheChampJT
I've been watching this thread for a bit now. At the same time I have been digging deep into my i760.
I was finally able to use itsutils (from here: http://www.xs4all.nl/~itsme/projects/xda/tools.html ) to run the following commands without errors:
pdocread
pmemmap
pmemdump 0x80000000 0x02000000 rom.nb
That last one gave me a 32Mb file obviously titled "rom.nb". I was feeling all uber l33t until I realized I have no clue what to do now. I am trying to decompile the file I dumped with the perl script that Willem (aka itsme) posted on his RAPI tools site. I am trying to compile the perl script in WinXP, because that's the OS I dumped the rom.nb file with. Should I boot into linux (fedora 8 or Backtrack3beta is all I got) to run the perl script? I haven't tried much of anything with it yet because I just dumped the rom.nb file late last night. However, any advice would be much appreciated.
I think my i760 is CID unlocked, because the first time I tried to run pdocread I got an error that said "Have you CID or application unlocked your device?". When I was able to run pdocread, I assumed I had somehow CID unlocked my device. But I have no way to tell for sure whether its CID unlocked or not. Its not like there's a popup window on the i760 that says "You've CID unlocked you device!!" So that's my second question, how do I know if I CID unlocked my device?
I've been hacking away at this for a solid 12days now Well, more like a month or so. I always peek into my new toy's registry as soon as I get it and make a few changes here and there to see what happens. I've run the Windows Mobile Security Configuration Tool and set my profile's security to "off". I made some changes to the reg entries under the policies entry. I've also done the whole **33284 then set to DM then reboot and set data connection to Modem Through USB, connected my i760 and installed the drivers for the Samsung modem in that mode (they are different from the MCCI drivers and modem set up). As you can probably tell, I operate on a "try a small hack, then see what happens, repeat" basis.
So that's where I'm at right now. Probably TMI for you, or anyone else reading this, but I am trying to put out as much info/knowledge as I can.
Obviously I am willing to help get a working, easy to use, cooked rom. Let me know if you want any of the files I have pulled off my device or any of the tools or dll's that I have found on the web, or any of the print outs I got from the itsutils cmd line tools.
Ta Then,
Alqui
You can PM me here at XDA or over at PDAPhoneHome, that is unless you think I'm a total ****tard, then don't PM me anywhere.
T9 for the front.
Hey guys I just want to say to ND4SPD, Shadowmike and the rest of you who have help in the wm6.1 ROM development, GREAT WORK. I just wanted to throw this thread up to get a response from everyone with edits. I know when I flash my phone to try new ROMs I have to search for all the registry edits. It would be easier if i could just go to one thread. So I hope this helps (plus the same questions wont get ask on every other thread).Thanks again.
suasp0nte said:
Hey guys I just want to say to ND4SPD, Shadowmike and the rest of you who have help in the wm6.1 ROM development, GREAT WORK. I just wanted to throw this thread up to get a response from everyone with edits. I know when I flash my phone to try new ROMs I have to search for all the registry edits. It would be easier if i could just go to one thread. So I hope this helps (plus the same questions wont get ask on every other thread).Thanks again.
Click to expand...
Click to collapse
http://www.allshadow.com/forum/viewtopic.php?f=3&t=1214
AllShadow is possbily the best website for the Shadow/Juno. No offense to XDA They just have everything covered there quite well.
ajb303 said:
http://www.allshadow.com/forum/viewtopic.php?f=3&t=1214
AllShadow is possbily the best website for the Shadow/Juno. No offense to XDA They just have everything covered there quite well.
Click to expand...
Click to collapse
Hey thanks for that it really help. But I know there is more out there I just can't remember were I found them. But that is definitely a good find. Thanks again
Freddyreyes.com is also another great site for the sahddow as well. I am still new to this, have had success customizing my shaddow, but still am lost when it comes to registery edits. Can anyone please tell me how to explore my device files using a registery editer?? That seems to be something that has really held me back from the things I still need done on my phone. Future thanks!! Excuse my ignorance in this matter. . .
CERegistryEditor
johnnyeoneal said:
Freddyreyes.com is also another great site for the sahddow as well. I am still new to this, have had success customizing my shaddow, but still am lost when it comes to registery edits. Can anyone please tell me how to explore my device files using a registery editer?? That seems to be something that has really held me back from the things I still need done on my phone. Future thanks!! Excuse my ignorance in this matter. . .
Click to expand...
Click to collapse
You can't explore your phone using the registry editor....a registry editor is intended to help you make modifications to the system registry in order to make certain changes to the system.
A very useful tool I use is the CERegistryEditor by mdSoft (http://ceregeditor.mdsoft.pl/).
It is very powerful & I can perform backups of the whole ssytem registry into the PC directly & even compare registry backups with the current active system registry to check for changes or modifications made by certain applications or settings.
Another advantage is that you can make use of the full QWERTY keyboard of your computer thus avoiding mistakes when modifying the registry on the phone/device using device-side registry editors (PHM RegEdit or dotFred's Task Manager).
This tool should give you a lot of mileage with whatever modifications you need to make.
Attention:
The Release is Here
I do alot of skinning but finally decided to jump in and try and actually create my own program, and i need a little help
Some of you may be familiar with trinket softwares "fake call." If not you can do a quick read up with this link.....
http://www.trinketsoftware.com/FakeCall/
I am in the middle of developing something similar but a freeware version (if you didn't know the software isn't freeware any longer) I had put a very basic but working program together in basic4ppc, i then found out i had to buy the software to compile the program. Since i already own visual studio 2008 i decided i would go ahead and try to rewrite my program in vs.
I have completed my design, but i need help with the code....
i need a help with-
"sound" - i obviously need to be able to play sound, i have looked in ms help in vs and they provide some keywords but i am getting errors when i debug.....
-how to load images from an xml file- (in need code for the call)
These will all get me rolling and allow me to release a beta......
I'm getting closer and closer
Because everyone has a different dialer or "incoming call screen," i have decided the best way to go about your fake call is to allow people to select a screen shot and a sound of their choice, creating a very customized realistic experience for every phone (as it would look just like the dialer on your phone) without having to input an obsessive amount of information. (caller name, picture, ect..)
thanks for your help in advanced
THANKS TO-
MRABIE
Attention:
The Release is Here
Wow, this is great. Ya, since fake call is no longer free this is a very amazing idea. I know a lot of people here will help you. We just have to wait. =)
Great idea, I downloaded that app a while ago when it was posted and was rather disappointed to find out it was fake freeware. A couple of suggestions, the aforementioned app would use the default ringer. The suggestion seems pretty simple from a logistics point of view but may be more difficult to program than I would imagine, when selecting a person with a ringer other than default associated use that one. Maybe have a call timer that will stay up and count until the end button is tapped. Hope this helps.
I didn't realize that the other software had gone commercial. Thanks for stepping up!!
bump............
What programming language are you using, considering Visual Studio supports several.
In vb.net your Wait method could be replaced by Sleep(milliseconds). Documentation. I am not sure, however, it this method is included in the compact framework, assuming that's the one you are using. Hope this helps somehow.
Full .Net documentation can be found here.
I am using .net but may consider rewriting again later after getting a release to rid the program of dependacy on the .net framework.
I Have updated the list, as i have gotten some stuff already figured out thanks to different people on the forums, THANK YOU
If you guys can help me out with this other stuff it would be greatly appreciated
Whoa!
Trinket Software is practically giving away their apps!
http://www.trinketsoftware.com/xdadevoffer.aspx
selfdestrct said:
Trinket Software is practically giving away their apps!
http://www.trinketsoftware.com/xdadevoffer.aspx
Click to expand...
Click to collapse
thanks for posting.
just as a reference, there's something called DOWNCALL which is free and simple.
edit: my bad, this calls someone at a scheduled time.. doesn't fake a call.
this is nice of trinket but will only last until the 24, and is really only supposed to be for our webpage.
UPDATE:
i'm working on xml now
still need help with sound
did this die out or is it still in development?
jhw549 said:
did this die out or is it still in development?
Click to expand...
Click to collapse
Yeah, I'm curious to know as well. Thanks.
Heres an app I use called PhoneyCall
http://www.aimproductions.be/titleview_comingsoon.php?title=PhoneyCall
Hi peoples,
I have had a windows mobile phone for years, mostly thanks to the support of people on here who have been able to answer virtually every question about tweaks, enhancements etc and therefore stopped me throwing it out of the window. I currently have an HD2 and, again thanks to the people on here, I love it.
The only problem I've had is being able to find the tweaks and CABs without trawling through pages and pages of forum speak.
so, I've created a site call the cabcache.
The idea is to make it easy to find the cabs and tweaks, through a simple search.
it's in its early form as it's going to take me a while to collate all the tweaks and cabs available, but I'm adding more and more every day. If you would like to help me build the site, please get in touch.
I've tried (and will strive to) give credit to everyone who owns the cabs and tweaks. If you see something on the site that isn't giving you the credit you deserve, please get in touch. Similarly, please get in touch if you see one of your offerings that you would like removed.
At the moment, you cannot upload your own cabs (removed due to previous abuse) but this will be re-instated shortly (about a week I think once I've reconfigured the code)
so, if you want to help me out, please PM me, or get in touch through the site.
many thanks.
very good idea
Have just checked out the site and it is looking very good so far. Clear, concise and easy to use, perfect.
A cracking idea which will save a lot of time.
Keep up the good work and I hope you get the support the site deserves.
this is a great idea, hope it realy takes off.
stemoneymonkey said:
this is a great idea, hope it realy takes off.
Click to expand...
Click to collapse
thanks guys. It's going to take a while to gather everything and get it on the site, but I'm working hard on it.
I don't mean to be a ****, but what's the difference between an offsite compared to a thread that beat you to the point already: http://forum.xda-developers.com/showthread.php?t=584415
lemonspeakers said:
I don't mean to be a ****, but what's the difference between an offsite compared to a thread that beat you to the point already: http://forum.xda-developers.com/showthread.php?t=584415
Click to expand...
Click to collapse
The only difference is that thread is currently 67 pages, making it difficult to search.
I just wanted to make it easier was all.
If you'd make use of some PHP + a database and integrate rate systems/upload features this could be pretty good.. Then it could also display screenshots, be categorized, reviewed, etc..
You could also make it device-specific categorized. Then you can ask the XdaMarketplace developers to integrate it into their app by creating an API and not only offer apps but also tweaks/sense mods for their phones directly.
Hi , even if you don't add loads of features as mentioned above, which would be great, as it it its very useful as a searchable portal to all the adjustments that can be made. I picked up on one already swype, that I hadn't seen listed thanks for that.
Hi,
firstly, many thanks for all the positive comments (and the couple of negative ones I've had lol)
All feedback is appreciated.
Logins are back!!
so you can now create a login and add your own CABs and Tweaks.
As before, if you have any problems, or notice anything that shouldn't be happening, please let me know.
Hi Thanks, just tried to register and got the following . I will keep trying. Many Thanks.
-2147467259
There was a problem submitting this form, please try again or email us directly --
Oooops...an error has occured. Details of this error have been sent to me and I will investigate, and hopefully implement a solution.
Please click HERE to return to the homepage
Si607 said:
Hi Thanks, just tried to register and got the following . I will keep trying. Many Thanks.
-2147467259
There was a problem submitting this form, please try again or email us directly --
Oooops...an error has occured. Details of this error have been sent to me and I will investigate, and hopefully implement a solution.
Please click HERE to return to the homepage
Click to expand...
Click to collapse
Hi,
I've been getting the emails advising me of the error. The issue seems to be that you haven't entered an email address in the registration form. This is needed so that I can ensure the registration is from an actual person. Your email address is encrypted in the db and is quite secure.
Microsoft JET Database Engine error '80004005'
Operation must use an updateable query.
/header.asp, line 30
Click to expand...
Click to collapse
I guess I can't access the site, can I
Grtz,
Degake
bugger,
apologies..I'll go investigate.
twisted-pixel said:
bugger,
apologies..I'll go investigate.
Click to expand...
Click to collapse
No problem man
I just wanted to let you know
Keep up the good work!!
Grtz,
Degake
degake said:
No problem man
I just wanted to let you know
Keep up the good work!!
Grtz,
Degake
Click to expand...
Click to collapse
ok..so it's not my bad coding!! the site has crashed...bloody hosting company!!
I'm really sorry to anyone who tried to register and got errors. I will have it back up and running soon.
twisted-pixel said:
ok..so it's not my bad coding!! the site has crashed...bloody hosting company!!
I'm really sorry to anyone who tried to register and got errors. I will have it back up and running soon.
Click to expand...
Click to collapse
That's bad news
I'm looking forward to see the site online again
Grtz,
Degake
ok..
working again now. Had to get hosting company to reset permissions on the site as for some reason they had reverted to read only, meaning the DB couldn't be written to.
great idea, would be great if this thread is notified of updates as and when they are added as i/we will receive a notification
It would be really useful if there was some way to see which phones the cabs are compatible with. Some clearly don't work with the HD2, though they probably to work with other handsets.