Database Users

Problem after connecting with activesync

When I connect to active sync all works fine and connects and syncs but when I click on 'file', then 'connection settings' nothing happens, I can not get into the connection setting??
I want to tell it to connect to the internet to update weather info on my worldmate program because when I click on update it thinks it isn't connected for some reason and come up with a message stating I must connect with active sync and have an internet connection....which I have?? so I thought the problem must be in connection settings?
I was using activesync 4.0 I tried 4.1 and now I have 4.2 but still it doesn't work?
Any ideas anyone?
Thanks in advance

Bluetooth active sync wont connect

When i try to connect to active sync with bluetooth it opens the port, and then says connecting on both the computer an wizard for a few minutes before just closing the connection. It never connects or syncs. Whats wrong?

Is this the first time you are trying to sync using bluetooth?
If so please disable all VPNs & Anti-virus and then try.
Also give the whole scenario and configuration you are trying to connect. It will be easier to troubleshoot.
~

how to connect my ipaq to the internet via active sync

hi all,
i've been trying unsuccessfully for days now to try to connect my ipaq 114, running on windows mobile 6 to the internet via my desktop connection. someone suggested the internet pass through connection but apparently active sync does not support that anymore. i have absolutely no idea what to do or if i can even connect to the net via my desktop connection. my pda is also bluetooth enabled. would that be an easier option to do or not?
i've trie googling for answers but most times i end up more confused. can someone please help this newbie out . it would be most appreciated.

if your activesync is not set to block it or your firewall is not
then going into settings->connections->connections->advanced select network
and choosing my network or something like that
should force your device to use the ac connection as network

xxxxxxxxxxxxxxx

i'm not sure but i always close my firewall when i active sync as my firewall always interupts my connection
i don't see this advanced select network. so i just click on connections settings in active sync and enable evrything.didn't work. do i have to like set up new modem connection or something really basic i have not done

it's a tab called advanced which have a button called select networks

on ur desktop puter, goto active sync connection settings and have it set to the connect to the internet...mine didn't work if i had it on automatic setting
GL

ok i have set it to this computer is connected to internet but it still says cannot cannot with current connection settings?

anyone got any ideas how i can connect my pocket5 pc to the internet using my desktop connection?

I am having a similar problem. my Windows Mobile 6 device works fine at home via Visa sync, or via Wifi. At work if I try to use activeSyn on Windows XP the sync part works fine, but I can't see the internet on the mobile device. On the palmtop I have tried the USB to PC advanced network functionality both on and off. I have also tried various suggestions on this thread, but not working.
any suggestions would be welcome
Bruce

Mobile device can't see internet via XP activesync
I am having a similar problem. my Windows Mobile 6 device works fine at home via Visa sync, or via Wifi. At work if I try to use activeSyn on Windows XP the sync part works fine, but I can't see the internet on the mobile device. On the palmtop I have tried the USB to PC advanced network functionality both on and off. I have also tried various suggestions on this thread, but not working.
any suggestions would be welcome
Bruce

[solved] Q about settings for internet sharing

I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
EDIT:
So, I got the Internet Sharing to work and just wanted to share what I learned in case it helps someone else. I'm using the HD with stock WM 6.1 and a PC running XP with Active Sync 4.5.
My problem was that even after applying all the correct settings, Internet Sharing was never able to establish a connection (it kept saying "check USB connection"). I noticed in my PC under My Computer>Properties>Hardware>Device Manager that there was an exclamation point beside the phone network adapter, so I updated/uninstalled/reinstalled the driver with no success. This driver is normally automatically installed when you first install Active Sync and create a partnership with your phone, so then I decided to uninstall and reinstall Active Sync and then created a new partnership with my phone (I didn't have to worry about losing any of my synced contacts, notes, calender, texts, etc because I also sync with Microsoft MyPhone, which I highly recommend). Afterwards, I disconnected my phone from the PC and closed Active Sync. Then I used the following settings/steps and Internet Sharing worked flawlessly.
Here are the settings I used:
-in Active Sync: unchecked "allow usb connection", unchecked "allow connections to one of the following", "this computer is connected to" set to automatic, checked "open active sync when my device connects", checked "allow wireless connection on device when connected to the desktop"
-in PC: disable Windows Firewall and all other 3rd party firewalls
-in PC internet explorer: set LAN settings to "automatically detect settings" (in Firefox under Tools>Options>Advanced>Network>Settings set to "auto detect")
-in phone: under Start>Settings>Connections>USB to PC checked "Active Sync", unchecked "enable faster data synchronization", checked "ask me first about UBS connection type when I connect the device to the PC"
With these settings:
-connect your phone to PC (on phone, dialog box should appear showing Active Sync checked, USB unchecked, Internet Sharing unchecked)
-nothing should happen at this point
-then in phone, launch Internet Sharing, set PC Connection to "USB", set Network Connection to whatever data network your phone uses, then press "connect" (the status will change from "disconnected" to "check USB connection"); wait about 15-20 seconds while your PC reacts (it takes this long only the first time you connect because the PC is installing the appropriate drivers)
-the Internet Sharing status should change to "connected" and now you can use the internet on your PC through the data connection on your phone. So simple if everything works properly.
FYI:
-if you go back to PC under My Computer>Properties>Hardware>Device Manager you will see your phone network adapter (no longer with an exclamation point) called "Windows Mobile-based Internet Sharing Device"
-f you go to PC Network Connections you will see your new phone LAN connection
-if your phone falls asleep while connected, the internet connection does NOT get interrupted; I also received a text while it was connected with no problem
To Disconnect Internet Sharing:
-close all browsers, press disconnect on your phone, then unplug your phone from the PC
-you can now turn active sync back on by checking "allow usb connection" and turn your PC firewalls back on
Wow, sorry so long, hope it helps someone.

goldsfool said:
I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
Click to expand...
Click to collapse
If your trying to do this at work, there is most likely a firewall setup so this wouldn't be possible unless your knew access codes etc for firewall
If this is with your home pc, when connecting pc to HD using usb you should automatically be presented with a synchronization screen from activesync for setting up a connection. Ensure you select 'allow wireless data connections on your device while it is connected to your computer' before finishing

And also :-
On the Touch HD
Start - Settings - Connections - USB to PC
Check Activesync and uncheck "enable faster data synchronisation"
Spent a couple of hours trying to connect before I did this.
Hope this works for you.
r
Andrew

Thanks guys for your responses.
I've already tried each one of those things. I'm at home with firewall disabled, have the correct boxes checked in Active Sync, have the correct connection settings on the phone, etc. I've tried all possible combinations.
When I go to My Computer/Properties/Hardware/Device Manager I even see the phone Network Adapter but it has an exclamation point beside it. So I try to update/uninstall/reinstall the driver and it still doesn't work. Do I need to manually install different USD Modem drivers?? This doesn't seem right because these drivers should automatically be installed when I installed Active Sync.
I'm gonna try to update everything e.g. xp service pack and uninstall/reinstall Active Sync, etc. Hopefully after all of that it will work.

Active sync only trough a wifi connection

Hello,
I searched the forum but found nothing...
is there a way that active sync downloads automatically new exchange stuff ONLY from a wireless connection (I disabled data) ?

no, not possible. Activesync only works with a direct cable connection, serial or TCP-IP, or bluetooth. The software is old and cranky and Microsoft has essentially not updated it in years and is stuck in a 2002 timewarp. They do not have anyone actively working on it, now Windows 7 connection manager may allow wi-fi, but I have not seen that to work either, as it is configured to work on with serial ports, USB or bluetooth serial. I have not seen wi-fi able to emulate a serial connection and that is what is required.
Maybe someday, but not soon, I am afraid.

More thoughts, if you mean getting email from your server, through activesync, yes that is possible, as you only need to open activesync connection settings and check the box to allow wireless connection while the device is connected. If this is what you mean, then yes you can.

Sorry, I think you misunderstood me, let me explain more clearly :
I'm speaking from my touch pro 2 mobile device, not from my PC
What I mean is when you have a working data 3G (or whatever) connection on your WM device, you activate push mail and tell active sync in the schedule options to retrieve emails, calendar, contacts whenever "item arrives".
Now, from what I know and from what I was been able to discover, this only works if, like I said, you have a working data connection.
Since I don't have any data connection, i would like to keep the same behavior but with my WM connected to a Wifi, in order that he retrieves stuff only when connected to a Wifi
ms0529 said:
More thoughts, if you mean getting email from your server, through activesync, yes that is possible, as you only need to open activesync connection settings and check the box to allow wireless connection while the device is connected. If this is what you mean, then yes you can.
Click to expand...
Click to collapse
I didn't find that setting (while im connected to a Wifi)
In active sync when I tip "Menu", I get :
Options -> there i can delete the sync profile or edit it
Schedule -> there i can say when to sync stuff
Status -> the status
Configure server -> same menu than "Options", but directly in the edit mode
Connections -> there it says :
When cradled
Synchronize all PCs using this connection:
'BlueToothActiveSync
'USB
Connect via Bluetooth -> bluetooth stuff
so please let me know what you mean with "allow wireless connections"
ho, btw i'm running wm 6.5 (energy rom)
Edit : I forgot to add that what's weird is that if i synchronize manually (also trough wifi) it works..so why isn't there some option to made it work automatically ?

I've seen that happen too - connect via cable with the wifi active and it will start synching, then disconnect the cable and viola - the tilt2 stays connected via wifi. but how to initiate the same connection without the cable, that's the great mystery.

auto connect with wifi?