Related
First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.
Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!
hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse
English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html
i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.
http://blogs.msdn.com/windowsmobile/archive/2006/04/28/586453.aspx
On the WM Team Blog they address the reaction to the nearly worthless battery icon replacing the clock. Good news is that ROMs using AKU2.2 and later will allow you to add the clock back in, bad news is that the current JasJar ROM (1.30.76) doesn't seem to have the 2.2 release of AKU.
Can people with other carrier's ROMs check to see if the registry edit they provide works with your ROM?
The egistry edit is to add a DWORD titled ShowTitleBarClock with the value of 1 in the HKEYLM/SOFTWARE/Microsoft/Shell location.
Didn't work for me
Doesn't work in the latest dopod rom 1.30.111 either...
The message on the MS site is from yesterday, and the guy is speaking of a "further release", i think AKU 2.2 don't exist yet
btw: isn't working on my wizard too
AKU 2.2.1 exists...
this is the nessesery file, you need to replace the existing one with this one (windows directory)
and add
[HKEYLM/SOFTWARE/Microsoft/Shell]
"ShowTitleBarClock"=dword:1
this is only for AKU 2.0!
!!!Attention: Make a backup and read through this tropic!!!
Problems with Universal roms!!!!
Perhaps related to the certification. Plz someone with removed certification try this... and post the results.
RE
The shell32.exe file in my QTEK 9000 is located in ROM something which you cannot copy out.
Does a soft reset reverts back to original battery icon if I'll to replace with the attached shell32.exe file?
After the battery icon is replaced by the clock icon, can I add a date to it also using any known method to put a date on top of the clock?
I believe a hard reset will definitely reverts back to the original battery icon, right?
Thanks
only a hard reset reverts back to the original.
add a date: I think so... not tested, but it should work.
I have a special rom where it is possible to overwrite system files, but It could be difficult to replase shell32.exe on a normal rom and I cant make a cab, because I dont know how to sign that.
plz someone with the knowledge about that make a cab.
don't bother, because even if you replace the shell32.dll, it wont restart, displaying the keyboard and getting stuck there.
You will have to hard reset and restore from a backup to get back your device.
A word of warning - back up before trying this. It hosed my universal. It would not even finish booting, and I had to hard reset.
Surur
Ok, I realy sorry.
It works for me...
Himalaya (rom based on 2.00a)
On my ROM (Qtek latest) in \Shell\Taskbar there's a regkey LimitedClock set to 1. If I set that to 0, the clock will at least display everywhere except Today, both in landscape and portrait modes. With it set to 0 as per standard, the clock only shows up while in apps *and* landscape, apps/portrait it doesn't. As long as the Today screen time&date plugin is switched on, this means you've always got the clock. BTW, needs a softreset to activate, Taskbar settings apparently are only read on first startup.
bepe said:
Ok, I realy sorry.
It works for me...
Himalaya (rom based on 2.00a)
Click to expand...
Click to collapse
I'm sure you realise this is a universal forum? You should edit your post to remove your file before somebody else zaps it's unit.
I dont think so, because the os is the same.
My rom is not realy Himalaya, it is a ported wizard os and only the drivers of Himalaya.
So the file should work on all WM5 devices, perhaps the problem is related to the removed certification on Him 2.0 rom's.
(This file is from an Atom rom not Himalaya)
But you are right, I edited the post.
Disablesecurity.cab, replace shell32.exe with new, softreset
Hangs at boot with the soft keyboard superimposed over the boot screen. Hard reset to fix.
Basically, avoid this for a while.
......or use Wisbar Advance 2 and you have your clock back on the Today screen....
Cheers
hrb
JasperJanssen said:
Disablesecurity.cab, replace shell32.exe with new, softreset
Hangs at boot with the soft keyboard superimposed over the boot screen. Hard reset to fix.
Basically, avoid this for a while.
Click to expand...
Click to collapse
I can confirm this - same result on the latest O2 AKU2 Rom.
Cheers,
Steve.
Same on the Dutch SPV M3000 AKU2 ROM. Phone doesn't reboot.. ..had to hard reset...
JasperJanssen said:
On my ROM (Qtek latest) in \Shell\Taskbar there's a regkey LimitedClock set to 1. *zap*
Click to expand...
Click to collapse
You can access that feature simply by going to the date/time settings and enabling "Display the clock on the title bar in all programs" on the |More| tab.
O2 xda Atom have AKU2.2.1 and it really works no more battery icon.
bepe said:
AKU 2.2.1 exists...
this is the nessesery file, you need to replace the existing one with this one (windows directory)
and add
[HKEYLM/SOFTWARE/Microsoft/Shell]
"ShowTitleBarClock"=dword:1
this is only for AKU 2.0!
!!!Attention: Make a backup and read through this tropic!!!
Problems with Universal roms!!!!
Perhaps related to the certification. Plz someone with removed certification try this... and post the results.
Click to expand...
Click to collapse
Hello,
It is my first post on this forum.
Yesterday, I unlocked my frensh SPVM3000 (Wizard) and tried to replace my "shell32.exe" by the "shell32.exe" downloadable on this post.
It was a BAD idea! My SPV starting crashed because it was for Universal smartphone. I used the button sequence to re-install the original software.
Have you an address where I can download the "shell32.exe" of the Wizard AKU 2.2 software?
Thanks for your help.
Seb...
hi, i have managed to change the splash screen using buzz tools (t-mobile logo in my case) but how do u change or get rid of the other splash screen or what ever it it..in my case windows mobile logo ?? can i replace it or just have nothing.. i have read that it is welcomehead.192 which is in /windows but when i copy it to my PC i cannot see it anywhere. can anyone help with doing this ?? cheers
cudo
OK, i have sorted it out:
/windows/welcomehead.192.png - just make your own *.png file and replace the exisiting one. it must be 640x480 pix.
bye, and thanks for your help !
thanks for your finding. I will have a try
sorry i didnt find the post sooner CUDO, great of you to work this out, Keep up the good work
Hi, guys. I'm new for universal. I use O2 Exec and up Rom to Dopod 900. I like to use O2 splash screen but cannot find the pic of it.
Anyone can share the pic? Or where can I get it.
Thanks in advance.
hi there,
i'm looking forawrd to have the same original o2 splash screen on my dopod 900 too......any1 out there could guide us to do that?
regards
Hi,
how did you replace it? Active Sync can't replace it, he always tells me about an error that there would not be enough space...
Damn, would really like to have my own picture there....
MfG
MPW
@MPW: replace it by overwriting with another file with the same name!
You can even take a jpg with less quality and size and rename it to png file type, still works!
so all you need is a o2 wallpaper like on the start up.easy done i will see wot i can do.
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
Hi All
Im looking for Xperia logo animation on the startup, I dont really know the name of the file, but it is the screen that comes after the sony ericsson logo If i recall.
Thanks in advance
theres a cab with it i posted here, the cab just sticks the file in windows and makes sure the reg is pointing to the right place
http://forum.xda-developers.com/attachment.php?attachmentid=140838&d=1230499556
fards said:
theres a cab with it i posted here, the cab just sticks the file in windows and makes sure the reg is pointing to the right place
http://forum.xda-developers.com/attachment.php?attachmentid=140838&d=1230499556
Click to expand...
Click to collapse
Thank you very much, ill test it when I get back home
just thought, the gif is on my x1, :doh
zipped to overcome the gif file limit
unzip and stick in the windows folder
fards said:
just thought, the gif is on my x1, :doh
zipped to overcome the gif file limit
unzip and stick in the windows folder
Click to expand...
Click to collapse
oh cool thanks man, how does this differ from the cab file?
its just the gif file, you can change the setting with advanced config or manually editing the registry
to point to the file
hklm/software/htc/htc animation startupgif /windows/semc1904.gif
Apologies for hijacking the thread slightly (it looks nicely resolved to me though), does anyone know where the initial Sony Ericsson image is stored - i.e. the one that greets you when you first fire up the Xperia?
I found SEMC2904.bmp in the Wndows folder which is exactly what the startup screen looks like, but even if I change that file the startup image stays the same.
Any ideas? Or failing that, is there a registry setting to change the path for the initial startup image?
Mr Anderson said:
Apologies for hijacking the thread slightly (it looks nicely resolved to me though), does anyone know where the initial Sony Ericsson image is stored - i.e. the one that greets you when you first fire up the Xperia?
I found SEMC2904.bmp in the Wndows folder which is exactly what the startup screen looks like, but even if I change that file the startup image stays the same.
Any ideas? Or failing that, is there a registry setting to change the path for the initial startup image?
Click to expand...
Click to collapse
That's a bootsplash, not so easy to change, best done with a rom kitchen.
fards said:
That's a bootsplash, not so easy to change, best done with a rom kitchen.
Click to expand...
Click to collapse
Okey dokey - thanks for a helpful answer. I'll leave it be.
As a former Palm and Symbian user I still have much to learn about Windows Mobile, so I'm grateful for your assistance.
Can't restore xperia animated logo
Hi there,
been trying to get back xperia animated logo but no luck, seems that registry keys are not enough.
I've messed witk Mainsplash and Subsplash and successfully changed both by modifying htc rom tool settings and playing with nbimg, but xperia animated logo doesn't have anything to do with bootsplash, it's managed bt registry and no need to mess with reflashing inital splashes.
Here's what occurs at wm boot:
1. Display Mainsplash
2. Display Subsplash
3. Display Animated logo
4. Display Welcomehead*.png
I 've also tried playing with registry keys which were used successflly by HTC prophet users to display boot animation (see : http://forum.xda-developers.com/showpost.php?p=1719336&postcount=19)
but still no luck...
Has anyone succesfully restored Xperia boot logo ?
EDIT: Solved!
Hi there,
been trying to get back xperia animated logo but no luck, seems that registry keys are not enough.
I've messed witk Mainsplash and Subsplash and successfully changed both by modifying htc rom tool settings and playing with nbimg, but xperia animated logo doesn't have anything to do with bootsplash, it's managed bt registry and no need to mess with reflashing inital splashes.
Here's what occurs at wm boot:
1. Display Mainsplash
2. Display Subsplash
3. Display Animated logo
4. Display Welcomehead*.png
I 've also tried playing with registry keys which were used successflly by HTC prophet users to display boot animation (see : http://forum.xda-developers.com/showpost.php?p=1719336&postcount=19)
but still no luck...
Has anyone succesfully restored Xperia boot logo ?
EDIT (14/01/2009):
Finally managed to get this stuff back, registry keys were not correct.
Here is a link for all those who want to get back their Xperia Boot Logo.
Unzip this file in your kitchen's OEM folder, it is ready to be cooked:
http://www.4shared.com/file/80625819/778c01d2/Xperia_stock_startup.html
(if you want to get it back without cooking anything, just put the file in \windows
on your device and edit your registry according to included keys in .rgu file)
Hope someone will find this usefull.
Cheers.
the reg key works prefectly in mine and on several other wwe roms are you on a french rom? that may be the problem..
you dont need to start playing with cooking roms just to get the htc animated startup working.
of course the easy way is to use advanced config to choose the gif you want to use.. and thats where i got the reg key from
Thank you for the answer fards, the problem was that at the beginning i was trying to put the wrong reg key which was included in archive posted some posts above.
First reg key i've tried was:
HKLM/software/htc/htcanimation
Tried also with a space between "htc" and "animation" but none worked.
By searching a little i found some htc prophet related posts with registry settings that put me on the right path.
After some unsuccessful tries i found that the following keys did the trick - at least for me -:
"Volumn"=dword:00000000
"WAVFile"="dummy"
"Enabled"=dword:00000001
"GIFFile"="\\Windows\\SEMC1904.gif"
"Priority"=dword:000000C8
As you can see, the keys for playing a wave file when dislaying animation are here too.
Since i'm beginning in cooking stuff - and also in the whole ppc world - and wanted to make an ultralight ROM from my stock french one, i wanted to do everything at hand, in order to improve my understanding of the whole stuff, including little "cosmetic" details as well as critical system tweaks to fit my needs without using a single piece of additional software.
I've edited my previous post according to how i resolved this and included a zip archive to replace the one posted previously, which was including wrong registry settings.
Nice to see what we can achieve by working on various things and exchanging ideas, techniques and advises.
I've learned many thing since i began last week, but still a lot to learn...
Now i can go to the next level...
Cheers and thanks again.
ragnascroutch said:
Thank you for the answer fards, the problem was that at the beginning i was trying to put the wrong reg key which was included in archive posted some posts above.
First reg key i've tried was:
HKLM/software/htc/htcanimation
Tried also with a space between "htc" and "animation" but none worked.
By searching a little i found some htc prophet related posts with registry settings that put me on the right path.
After some unsuccessful tries i found that the following keys did the trick - at least for me -:
"Volumn"=dword:00000000
"WAVFile"="dummy"
"Enabled"=dword:00000001
"GIFFile"="\\Windows\\SEMC1904.gif"
"Priority"=dword:000000C8
As you can see, the keys for playing a wave file when dislaying animation are here too.
Since i'm beginning in cooking stuff - and also in the whole ppc world - and wanted to make an ultralight ROM from my stock french one, i wanted to do everything at hand, in order to improve my understanding of the whole stuff, including little "cosmetic" details as well as critical system tweaks to fit my needs without using a single piece of additional software.
I've edited my previous post according to how i resolved this and included a zip archive to replace the one posted previously, which was including wrong registry settings.
Nice to see what we can achieve by working on various things and exchanging ideas, techniques and advises.
I've learned many thing since i began last week, but still a lot to learn...
Now i can go to the next level...
Cheers and thanks again.
Click to expand...
Click to collapse
i tried all the methods posted on this thread...and is til cant get the animation back up. are there any other ideas?
bknewtype said:
i tried all the methods posted on this thread...and is til cant get the animation back up. are there any other ideas?
Click to expand...
Click to collapse
What is your rom version ? is it a stock one or a cooked one ?
ragnascroutch said:
What is your rom version ? is it a stock one or a cooked one ?
Click to expand...
Click to collapse
stock rom, 1.02.931.3. im not ready to try cooked yet lol
how about edit the startup sound file?
boot logo
ragnascroutch said:
Hi there,
been trying to get back xperia animated logo but no luck, seems that registry keys are not enough.
I've messed witk Mainsplash and Subsplash and successfully changed both by modifying htc rom tool settings and playing with nbimg, but xperia animated logo doesn't have anything to do with bootsplash, it's managed bt registry and no need to mess with reflashing inital splashes.
Here's what occurs at wm boot:
1. Display Mainsplash
2. Display Subsplash
3. Display Animated logo
4. Display Welcomehead*.png
I 've also tried playing with registry keys which were used successflly by HTC prophet users to display boot animation (see : http://forum.xda-developers.com/showpost.php?p=1719336&postcount=19)
but still no luck...
Has anyone succesfully restored Xperia boot logo ?
EDIT: Solved!
Hi there,
been trying to get back xperia animated logo but no luck, seems that registry keys are not enough.
I've messed witk Mainsplash and Subsplash and successfully changed both by modifying htc rom tool settings and playing with nbimg, but xperia animated logo doesn't have anything to do with bootsplash, it's managed bt registry and no need to mess with reflashing inital splashes.
Here's what occurs at wm boot:
1. Display Mainsplash
2. Display Subsplash
3. Display Animated logo
4. Display Welcomehead*.png
I 've also tried playing with registry keys which were used successflly by HTC prophet users to display boot animation (see : http://forum.xda-developers.com/showpost.php?p=1719336&postcount=19)
but still no luck...
Has anyone succesfully restored Xperia boot logo ?
EDIT (14/01/2009):
Finally managed to get this stuff back, registry keys were not correct.
Here is a link for all those who want to get back their Xperia Boot Logo.
Unzip this file in your kitchen's OEM folder, it is ready to be cooked:
http://www.4shared.com/file/80625819/778c01d2/Xperia_stock_startup.html
(if you want to get it back without cooking anything, just put the file in \windows
on your device and edit your registry according to included keys in .rgu file)
Hope someone will find this usefull.
Cheers.
Click to expand...
Click to collapse
how did u change the boot logo using htc tools? can you show me the steps?
I had the same isue
ragnascroutch said:
Thank you for the answer fards, the problem was that at the beginning i was trying to put the wrong reg key which was included in archive posted some posts above.
First reg key i've tried was:
HKLM/software/htc/htcanimation
Tried also with a space between "htc" and "animation" but none worked.
By searching a little i found some htc prophet related posts with registry settings that put me on the right path.
After some unsuccessful tries i found that the following keys did the trick - at least for me -:
"Volumn"=dword:00000000
"WAVFile"="dummy"
"Enabled"=dword:00000001
"GIFFile"="\\Windows\\SEMC1904.gif"
"Priority"=dword:000000C8
As you can see, the keys for playing a wave file when dislaying animation are here too.
Since i'm beginning in cooking stuff - and also in the whole ppc world - and wanted to make an ultralight ROM from my stock french one, i wanted to do everything at hand, in order to improve my understanding of the whole stuff, including little "cosmetic" details as well as critical system tweaks to fit my needs without using a single piece of additional software.
I've edited my previous post according to how i resolved this and included a zip archive to replace the one posted previously, which was including wrong registry settings.
Nice to see what we can achieve by working on various things and exchanging ideas, techniques and advises.
I've learned many thing since i began last week, but still a lot to learn...
Now i can go to the next level...
Cheers and thanks again.
Click to expand...
Click to collapse
Hi all....
ragnascroutch:
I had the same isue
I followed your instructions (modifying de Reg Key only) With all the Keys exactly like you except in the Key
"GIFFile"="\\Windows\\SEMC1904.gif"
Just worked with
"GIFFile"="\Windows\SEMC1904.gif" (only one back slah)
thanks Budie......