So i've tryed to do a hard reset on wm6, with no success . Now what i have is none functional unit , when i turn it on it hangs wouldn't respond to any clicks wouldn't even sync with a pc.
Please HELP
maybe this in the bootloader
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
sorry didn't really understand,
so what does it mean is it fixable or i'm fcked
Rudegar said:
maybe this in the bootloader
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Click to expand...
Click to collapse
ve39 said:
sorry didn't really understand,
so what does it mean is it fixable or i'm fcked
Click to expand...
Click to collapse
It means it'll wipe the Memory clean, giving you a fresh copy of WM6.
how do i wipe it clean if the screen of the iis gets frozen right after it's restarted and it wont sync with the PC because of that reason
Steve123456 said:
It means it'll wipe the Memory clean, giving you a fresh copy of WM6.
Click to expand...
Click to collapse
Same as WM5 RTFW
Midget_1990 said:
Same as WM5 RTFW
Click to expand...
Click to collapse
----
thank you
Related
Hello everybody,
Is there any backdoor possibility to run "Uncertified" CAB files on JasJar WM2K5 ?
Thank you for the answer,
Best regards,
Baudy.
From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V
vijay555 said:
From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V
Click to expand...
Click to collapse
Did not help, still says "Unable to install. Uncertified system software detected."
Baudy.
Try this:
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Snagged this from the Apache (Sprint PPC-6700).
BeyondtheTech said:
Try this:
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Snagged this from the Apache (Sprint PPC-6700).
Click to expand...
Click to collapse
No, did not help. Thanx anyway !
Uncertified system software problem, still a problem
Anyone have an update on this problem? I"m trying to install the Blackberry Connect software ( Not the TMO one) on a Cingular Wizard.
Thanks
Uncertified system software problem, still a problem
Anyone have an update on this problem? I"m trying to install the Blackberry Connect software ( Not the TMO one) on a Cingular Wizard.
Thanks
baudy2 said:
vijay555 said:
From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V
Click to expand...
Click to collapse
Did not help, still says "Unable to install. Uncertified system software detected."
Baudy.
Click to expand...
Click to collapse
Hey,
When you did a soft reset, did you do it using the hole or software?
I was told that if you use the hole the settings don't activate, you need to make the registry changes, and use software to restart the phone, like psShutXP.
Any help?
Regards.
Unfortunately Not
I've did a hard reset, hit the reset hole for 3 seconds when it starts to load software so I can boot up without the ROM loading ( as I have read you need to do ). I still can't install the Blackberry software. It still says that it's uncertified software.
Any other ideas?
Thanks for the patience.
You don't have to hold the reset pin in for 3 seconds, you have a window of three seconds in which to tap it.
OK, once you have done the hard reset you can then try the registry edit or the .CAB file to get rid of the security check.
Once you have edited the registry and installed the .CAB you will have to do a soft reset, not a hard one.
A hard one will make the changed that you just made go away.
If you have a copy of psShutXP you can use that to reboot rather than the reset pin, or you can make the changes then wait 5 minutes before you reset.
baudy2 said:
Hello everybody,
Is there any backdoor possibility to run "Uncertified" CAB files on JasJar WM2K5 ?
...
Click to expand...
Click to collapse
try this, I don`t know author, but it helped
By mistake I associated the exe file type on my hermes to a steup.exe file and now I cannot get anything to work , any ideas on fixing this. I cannot start up any programmes and cannot get into the system setting to fix this
Thanks I am running Schaps_WM6Pro_WWE_3.60a-0823_Full.exe
stgordon said:
By mistake I associated the exe file type on my hermes to a steup.exe file and now I cannot get anything to work , any ideas on fixing this. I cannot start up any programmes and cannot get into the system setting to fix this
Thanks I am running Schaps_WM6Pro_WWE_3.60a-0823_Full.exe
Click to expand...
Click to collapse
Hard reset?
Reflash?
Hi cannot reflash as it wont load activsync and I have tried a hard rest but to no avail. All the programmes the phone tries to load try to assocate to the .exe file I asscociated it with
thanks anyway
stgordon said:
Hi cannot reflash as it wont load activsync and I have tried a hard rest but to no avail. All the programmes the phone tries to load try to assocate to the .exe file I asscociated it with
thanks anyway
Click to expand...
Click to collapse
Hmmm... surprised the hard reset did not work.
Try a reflash, but start with the phone in Bootloader mode.
Works the same as a regular flash EXCEPT... put the phone in BL mode BEFORE plugging into the USB cable. Then run the update.
I apologise I had done the hard reset correctu, its fine now Thanks
stgordon said:
I apologise I had done the hard reset correctu, its fine now Thanks
Click to expand...
Click to collapse
Excellent. Glad it is working.
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G
hard reset
The only solution that always works
funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset
he just told you m8 perform a hard reset on the device
I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G
Format Your sdcard. the file must be on there if youve reflashed
Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.
lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G
You got rid of it. I edit out the post
Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.
got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:
hi, do u mind sharing how u got rid of it?
I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak
Hello
I was wondering what happend after using the hard reset method 'camera - volume down + power button".
"Then press Windows button twice to confirm."
What happens after this?
The device will be back on 7004 build (the one it came with) / i'll have to flash a rom on it / ...
I don't know what happens at this point so I want to be sure.
Jensveraa said:
Hello
I was wondering what happend after using the hard reset method 'camera - volume down + power button".
"Then press Windows button twice to confirm."
What happens after this?
The device will be back on 7004 build (the one it came with) / i'll have to flash a rom on it / ...
I don't know what happens at this point so I want to be sure.
Click to expand...
Click to collapse
no, it erase your Isolate Storage with all your personal settings and erase all installed apps. after reebot you still on your last build, like 8107.
mirolg said:
no, it erase your Isolate Storage with all your personal settings and erase all installed apps. after reebot you still on your last build, like 8107.
Click to expand...
Click to collapse
Really? Because it asks me to format.. So format seems a bit more than just erasing personal info.
I always though hard reset would bring the device back to original state (incl build)
So there's no way to go back before mango, besides flashing?
Jensveraa said:
Really? Because it asks me to format.. So format seems a bit more than just erasing personal info.
I always though hard reset would bring the device back to original state (incl build)
So there's no way to go back before mango, besides flashing?
Click to expand...
Click to collapse
why to go back before mango? no you still on your latest build.
mirolg said:
why to go back before mango? no you still on your latest build.
Click to expand...
Click to collapse
Had nokia drive xap on it, by using Samsung tools it messed up the whole thing and i had again maximum unsigned apps on it so it wouldn't start anymore (incl samsung tools, advanced config, registry editor etc..)
I want to be able to have all of that back, but at the moment that's not possible with current setup.
Jensveraa said:
Had nokia drive xap on it, by using Samsung tools it messed up the whole thing and i had again maximum unsigned apps on it so it wouldn't start anymore (incl samsung tools, advanced config, registry editor etc..)
I want to be able to have all of that back, but at the moment that's not possible with current setup.
Click to expand...
Click to collapse
a hard reset erase your interop- unlock also! the best flash a full unlock custom ROM, like my or from cees ....
mirolg said:
a hard reset erase your interop- unlock also! the best flash a full unlock custom ROM, like my or from cees ....
Click to expand...
Click to collapse
Yeah I noticed (the hard way) And for some strange reason the button to click 'restore' was not present in zune.. stupid thing
What do you think of this one?
http://forum.xda-developers.com/showthread.php?t=1571068
Can I just flash it like other roms?
Or do you advice another one? If you could help me with that ?
I have a samsung omnia 7, location: belgium, not provider linked (i read all the time something about providers en locations so I thought it would be useful to mention it.
Jensveraa said:
Yeah I noticed (the hard way) And for some strange reason the button to click 'restore' was not present in zune.. stupid thing
What do you think of this one?
http://forum.xda-developers.com/showthread.php?t=1571068
Can I just flash it like other roms?
Or do you advice another one? If you could help me with that ?
I have a samsung omnia 7, location: belgium, not provider linked (i read all the time something about providers en locations so I thought it would be useful to mention it.
Click to expand...
Click to collapse
not tested- but i think is good. limitation is only 0809 uk engl. works.
if you not like it- 2 minutes to flash a new .....
Step by step flash guide
mirolg said:
not tested- but i think is good. limitation is only 0809 uk engl. works.
if you not like it- 2 minutes to flash a new .....
Step by step flash guide
Click to expand...
Click to collapse
Thank you. I have flashed it with tango V3, works great and love the full unlocked features like "download from IE", change search key to open another app etc.
And now all of my interop apps, nokia drive 2.0 especially, are working again
Hi,
First of all thanks for this great ROM, i have one problem with it is, I can't change the OEM marketplace with MarketPlace config.
When I change it or try to restore the default values, I have an error message in the market place saying there is no results... do you have any idea of what I'm doing wrong?
Kind regards!
swellfr said:
Hi,
First of all thanks for this great ROM, i have one problem with it is, I can't change the OEM marketplace with MarketPlace config.
When I change it or try to restore the default values, I have an error message in the market place saying there is no results... do you have any idea of what I'm doing wrong?
Kind regards!
Click to expand...
Click to collapse
Hi
it works with me
http://forum.xda-developers.com/showthread.php?t=1624890
it is also
http://forum.xda-developers.com/showthread.php?t=1587986
or use this WHP Tweaks the link can not be shared
MTom said:
Hi
it works with me
http://forum.xda-developers.com/showthread.php?t=1624890
it is also
http://forum.xda-developers.com/showthread.php?t=1587986
or use this WHP Tweaks the link can not be shared
Click to expand...
Click to collapse
Thanks MTom, I already tried these two apps without success. I'm using the ROM in french, in which language are you running it?
swellfr said:
Thanks MTom, I already tried these two apps without success. I'm using the ROM in french, in which language are you running it?
Click to expand...
Click to collapse
Hungarian.
First there is an error message on startup, but works after
MTom said:
Hungarian.
First there is an error message on startup, but works after
Click to expand...
Click to collapse
Still no luck, I have the right Marketplace configured in the marketplace but when I open it, I still have no result...
Any idea on where should I start to look to troubleshoot the problem?
TIA
swellfr said:
Still no luck, I have the right Marketplace configured in the marketplace but when I open it, I still have no result...
Any idea on where should I start to look to troubleshoot the problem?
TIA
Click to expand...
Click to collapse
if you change the phone must be restarted
MTom said:
if you change the phone must be restarted
Click to expand...
Click to collapse
I restarted the phone after each modification...
Do you know how to change it by hand?
I will check the values to see if everything is fine...
swellfr said:
I restarted the phone after each modification...
Do you know how to change it by hand?
I will check the values to see if everything is fine...
Click to expand...
Click to collapse
165 post
http://forum.xda-developers.com/showthread.php?p=31348414#post31348414
MTom said:
165 post
http://forum.xda-developers.com/showthread.php?p=31348414#post31348414
Click to expand...
Click to collapse
Things looks right on my phone...
If I start from the beginning,
I update my phone's rom with vanilla -> format everything -> configure my live account -> install bazaar -> install marketplace config -> give root to marketplace config -> change OEM marketplace -> turn off / turn on.
Am I missing a step?
swellfr said:
Things looks right on my phone...
If I start from the beginning,
I update my phone's rom with vanilla -> format everything -> configure my live account -> install bazaar -> install marketplace config -> give root to marketplace config -> change OEM marketplace -> turn off / turn on.
Am I missing a step?
Click to expand...
Click to collapse
Well, it works... no idea why... but it works!
Thanks MTom!