Related
Hello,
I know this is mostly a personal tastes dilemma, but I am looking to add a few specific functions to my Wizard and I just can't find some solutions to very simple issues. Of course I already searched through several boards and freeware sites, but most of the times I am stumbling on overcomplicated, unreliable, unstable or just plain not-working apps even for the most trivial tasks. Other times they work fine... unless you have any other app installed, in which case they bork up the system royally.
So, what are your freewares of choice for the following functions?
1) ALARM CLOCK
Yes, just a damn simple alarm clock to wake me up in the morning. No fancy tricks: just set it (possibly even on a week's advance), select the sound/Mp3 to be played and be sure it rings up when the time is right. If you want to get luxurious, a snooze function initiated by any hardware button would be nice.
I used M.Toda's AlarmClock 0.04, but it seems to be impossible to select a specific sound or buzzing mode (it's always an ear-splitting MEEEEEEEEEEEEEEEP!!!), nor to keep using the Wiz when the alarm is set.
[Update: following Pat12's advice (see below) I downloaded the latest AlarmClock version (ARM version) and it works smoothly. No Mp3 alarms yet, though]
2) MP3 PLAYER
Just the very basic player functions: play the whole folder, add Mp3 to playlist, previous/play/pause/next buttons and a Mute function. What's the problem, you say? Well, all the players I found either blocked the phone functions (a player going on auto-hold on incoming calls would be wonderful), or would keep the touchscreen always active, making it impossible to put the Wiz in a pocket while listening to music.
[Update: The current best candidate seems to be Tcpmp, although it lacks a full graphic interface (meaning Previous/Next song buttons)]
3) WARDRIVER
Yes, I know. But WiFiFoFum hasn't any user-friendly way to select which available AP to hook to. HitchHiker does, but any time I launched it after the first one it made the Wiz unstable. That was on a non-updated ROM, though... I admit I have to check it again... unless you suggest anything better.
4) LAUNCHBAR
Nonononono... no l33t, gigacustomizable stuff, please. I simply need a self-starting thingie to have the icons for the Office apps and maybe the latest X opened apps always on my Today screen. If you've seen the "green" UK ad campaign for WM5 - that's exactly what I'm looking for.
5) ANTITHEFT APP
[edited: the correct name happens to be EyeOnThief, see below]
I used to use LockOnThief, which supposedly sends tracking SMSs to a hidden number list whenever a non-approved SIM card is inserted in the device. Great. Just one more thing would make it perfect: the ability to remotely wipe the device via SMS.
I know this is an AKU2 trick, but I've got no Exchange server so I'd like a simpler approach. Do you know any solution encompassing both the tracking and the wiping functions?
And, by the way, has anyone of you actually field-tested LockOnThief tracking abilities?
6) WI-FI "G" ENABLER
I'd simply like to enable the 802.11g protocol on my Wizard. The problem is: the Djvw Wizard Optimizer 2 seems to make my Wiz unstable, and Registry Wizard crashes on start (yes, I installed the other Cab too). What other layman's solution would you suggest?
[Update: thanks to Meschle (see below) now there is an optimal Cab-tweak for enabling the protocol!]
To give a little contribution, I can only give my undivided suggestions for four softwares I fully endorse:
SCROLLING - You guessed right, it's Smartskey! [And not "softkeys" as per my initial post...]
PERSONAL INFO MANAGER - EWallet. Not a freeware, but great in the way it synchs up with its desktop counterpart.
GAMES - PpcAtaxx (a much more interesting variant on the Othello/Reversi theme which is perfect while commuting) and PocketScumm, to play the old LucasArts graphic adventures
Thank you in advance for your help, I'll really appreciate it!
Hi I'll answer a couple of those
For an alarm see 'Wizard reliable alarm project' WRAPhere http://forum.xda-developers.com/viewtopic.php?t=43692
where there is an english version of pocket wakeup
Enable 802.11G reg tweak
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS: dot11SupportedRateMask=1
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS: dot11SupportedRateMaskG=8
All values are decimal
What does this green WM5 ad campaign look like? We yankees have been hearing all about it.
http://www.microsoft.com/windowsmobile/default.mspx
V
Can you provide a link for LockOnThief?
SCROLLING - You guessed right, it's Softkeys!
What is this? I'm having issues scrolling in PIE Plus since upgrading to AKU 2.3 and if this is an app i can try it may help. Do you happen to have a link to it?. TIA
Thanks for the first answers. Here are my first replies:
Meschle: I did check that thread, and it seems that Pocket Wakeup isn't very reliable at all... Also (but this is just an aside), the Italian translation of Pocket Wakeup was one of the worst apps I ever tried, totally borking the Wiz.
And about the registry tweak... I'm just a retarded farmgirl... no hacking tricks for me, please... I just can't believe there is no "download, run, forget" apps to enable the G protocol...
Mattucd & vijay555: Yup, that's it!
Romp: http://www.mycnknow.com/LockAppen.htm (My bad: the actual app name is EyeOnThief... I was confused by the actual filename)
Xandermac: Gah! I misquoted the name again! That would be Smartskey! I don't know if Smartskey will do anything for your problem, but it's right on this board, at http://forum.xda-developers.com/viewtopic.php?t=41060
Any more takers, please?
Alarm Clock: AlarmClockE is the only alarm clock software that is reliable for me, at least for the time being...(until it fails, like all the other I tried including Pocket WakeUp)
MP3 Player: TCMP, it does pause the song or video currently playing upon incoming phone calls
bubism said:
Thanks for the first answers. Here are my first replies:
Meschle: I did check that thread, and it seems that Pocket Wakeup isn't very reliable at all... Also (but this is just an aside), the Italian translation of Pocket Wakeup was one of the worst apps I ever tried, totally borking the Wiz.
And about the registry tweak... I'm just a retarded farmgirl...
Click to expand...
Click to collapse
Try mobialarm 3.2 then - I find this reliable and like it because it plays wma's http://guillaume.tristant.free.fr/
btw are you really a farmgirl? :wink:
Meschle: I am actually quite a bit of an IT girl, but sometimes I'd much rather go back to the farm. Case in point: MobiAlarm. To witness:
Installation notes :
- Uncompress the ZIP file in any directory in your PocketPC
- Run the CAB file, it will install a "runtime"
- Run the file called "install.app", it will install MobiAlarm[/url]
MobiAlarm link is located in \Windows\Start Menu\ or \Windows\Menu Démarrer\
The program himself is installed in \Program Files\MobiAlarm\
WHY?!? Why, I ask, should anybody need TWO installations for one godawful simple ALARM CLOCK, forchrissakes? And why does it end up tucked in a forsaken folder, with no icon anywhere? How should I be supposed to remind myself to browse up the Wizard to find a lone file among hundreds... just to get awaken on time?!?
And the punchline? I followed this guy's installation instructions: the runtime went smoothly, and his app simply never appeared anywhere. (my two cents: it found localized foldernames and aborted without any warning message).
Pat12: AlarmClock does the trick!!! No chance to get it playing Mp3s, apparently, but the ARM flavour gets the fade-in working. Thanks!
bubism said:
Meschle: I am actually quite a bit of an IT girl, but sometimes I'd much rather go back to the farm. Case in point: MobiAlarm. To witness:
Installation notes :
- Uncompress the ZIP file in any directory in your PocketPC
- Run the CAB file, it will install a "runtime"
- Run the file called "install.app", it will install MobiAlarm[/url]
MobiAlarm link is located in \Windows\Start Menu\ or \Windows\Menu Démarrer\
The program himself is installed in \Program Files\MobiAlarm\
WHY?!? Why, I ask, should anybody need TWO installations for one godawful simple ALARM CLOCK, forchrissakes? And why does it end up tucked in a forsaken folder, with no icon anywhere? How should I be supposed to remind myself to browse up the Wizard to find a lone file among hundreds... just to get awaken on time?!?
And the punchline? I followed this guy's installation instructions: the runtime went smoothly, and his app simply never appeared anywhere. (my two cents: it found localized foldernames and aborted without any warning
Click to expand...
Click to collapse
LOL I gather you liked the program :lol:
bubism said:
And about the registry tweak... I'm just a retarded farmgirl... no hacking tricks for me, please... I just can't believe there is no "download, run, forget" apps to enable the G protocol...
Click to expand...
Click to collapse
I put together a wlan g registry tweak cab and also a wlan b tweak for anybody who wants to revert back to b mode.
Install to device and softreset after.
2) MP3 / video player:
TCPMP, www.tcpmp.org
I doubt better could be made
Thanks for the auto-tweak, meschle!
If only things were always so straightforward...
Kilrah: The link you provided ain't working, but I found this download page for other interested people: http://corecodec.org/frs/?group_id=53&release_id=224#r224 (the version you want is the "Windows Mobile Smartphone" one).
In fact Tcpmp is very close to perfect. I only found it strangely lacks Previous/Next buttons on the main screen... or is there a plugin or something to get it?
Just a little update to say I recently needed a tool to fix a storage card, and I was pointed to the non-free but very good SK Tools... yay for it!
By the way, any more suggestions for my initial search?
about TCMP, you are right:no next/prev button. But it's highly customizable and you can assign the otherwise useless softkeys to it. I did it and I can operate TCMP without getting the stylus out or using my greasy fingers on my clean screen
Well..I find it's much easier to have clean fingers
Just kidding. TCMP is a true gem.
Mortplayer is a pretty good free mp3 player. Also there is an alarm clock built in, so you can use ur mp3's to wake you up, and it's been pretty reliable for me. Good interface and not very processor intensive.
http://www.sto-helit.de/modules/edito/content.php?id=28
Thank you all! I'm treasuring your suggestions... and continuing my search for the remaining apps!
For launchbar try http://forum.xda-developers.com/viewtopic.php?t=42913
Look also http://forum.xda-developers.com/viewtopic.php?t=39725 for more registry tweaks.
Ciao
*** CLICK HERE FOR A WORKING CAB VERSION ***
REQUEST (for better version):
Hi all coders! I have a request for a new Diamond app to fulfil my geek fantasies! Here is what I would like it to do:
Flicking the Diamond (like Kirk flicking open a Star Trek original series communicator) will perform the following actions:
1) Play attached .WAV file (or make it configurable)
2) Come out of standby (if in standby or backlight was off)
3) Go to configurable location (e.g. Home, Phone, Notes etc.)
I wouldn’t normally make such a request but considering some of the great apps appearing on this board I thought it would be worth a try
Cheers!
I like this
nice idea
Nice idea!
As a Trekker and sci-fi geekette myself would love this to go with the wonderful Star Wars lightsaber app
EDIT: Ignore this.
Sorry, I misread your post
This is a Great idea! please someone help us out here
Very interested to see how this works! I wonder how easy it is to develope for this phone...any pointers anybody?
yeah. this sounds like an awesome idea.
I noticed other threads saying that it would not be possible to wake up from standby as the g-sen doesn't poll then.
shame.
But I think it would still be fun, when on, to flick/flip the phone and get the wav sound and jump to the phone/dialer screen...
am i geeking out a little too much??
redman99 said:
I noticed other threads saying that it would not be possible to wake up from standby as the g-sen doesn't poll then.
shame.
But I think it would still be fun, when on, to flick/flip the phone and get the wav sound and jump to the phone/dialer screen...
am i geeking out a little too much??
Click to expand...
Click to collapse
That is a shame but understandable as the battery life would be even worse than it currently is.
Maybe tapping one of the volume keys to wake up the G-Sensor will be a possible solution?
And no, you can never be too geeky!
I vote for this. Great idea.
Working Trek communicator sound!
As is it is unlikey that someone will write an app to do this, I have created a little something with the little knowledge I have!
The attached file will allow you to get the classic Star Trek communicator sound everytime you come out of standby by pressing the Power Button.
Requirements:
You will need to install MortScript available from here:
http://www.sto-helit.de/index.php?module=download&action=view&entry=65
Installation:
- Once MortScript has been installed, create a folder in Internal Storage called 'Trek'
- Copy all files in the attached zip to this folder
- Using File Explorer on your device, click on 'TrekEnable'
Options:
There are no options per se, but you can do the following:
- Using Notepad on your PC, modify the file 'TrekPlay.mscr' to play a different WAV file of your choice. I have included two versions of the Star Trek communicator sound, a quiet version (enabled by default) and a loud version
- If you would like the files in another location, you must modify all the .mscr files and change the path
Uninstall:
- Using File Explorer on your device, click on 'TrekDisable'
- Delete the 'Trek' folder
NOTES: I have noticed that if you quickly power off then on again it will not play the sound. If you power off and leave it for about 10 seconds or more before powering on again it should work
Enjoy!
Works good man Thx
Edited: But for some reason time to time it plays the sound twice or three times..
New Cab Version
OK, I managed to get an easy to install and uninstall CAB working for this. You no longer need to install MortScript either.
The attached file will allow you to get the classic Star Trek communicator sound everytime you come out of standby by pressing the Power Button.
Installation:
- Copy the attached CAB to your phone and run it
- Select where you want to install it: Device or Internal Storage (I recommend Device as it is only 120Kb and should work faster)
Options:
NOTE: Default install directory is \Program Files\Wired Trek Communicator
There are no options per se, but you can do the following:
- Modify the file 'TrekPlay.mscr' to play a different WAV file of your choice. I have included two versions of the Star Trek communicator sound, a quiet version (enabled by default) and a loud version
Uninstall:
- Go to Settings > Remove Programs and select 'Wired Trek Communicator' then click 'Remove'
KNOWN ISSUES:
- If you quickly power off then on again it will not play the sound. If you power off and leave it for about 10 seconds or more before powering on again it should work
- Sometimes it will not sound after powering on but you may find that certain events cause it to sound afterwards, such as certain notifications
- It will also play the sound when removing the stylus if the phone comes out of standby
- If phone is in standby and you have set an alarm, the sound will play before your alarm sound
Some of these issues are down to Windows Mobile, others I may be able to workaround at some point.
Found another issue: Doesn't work properly with S2U2. Makes only sounds if I put in the USB cable which is attached to my PC.
Came across this post yesterday and thought to myself, that's a cool idea!
So I gave it a go, let me know what you think.
Download here: http://trueeddie.com/?p=49
PS: I haven't done extensive testing, so if there are issues just tell me.
It requires .net 3.5. You can install that with out your carrier though.
The app brings up the dialer and plays the communicator sound when you flick your wrist
10/16/08--
It is 12:00 central time (17:00 GMT I think) and I will close voting at 5:00pm Central Time (22:00 GMT) today. So that leaves you just 5 Hours to make your vote. I will try and post the winner up here later tonight, or you can check yourself at www.gudensoft.com.
Thanks!!
10/14/08--
First, thanks for all the great ideas. I would love to develop all of these if I could, but we have to decide on just one of the programs! So, Since I couldn't add a poll to this thread, I added it to HERE.
CLICK HERE TO VOTE!
I bet I know which will win, but who knows? The poll will end Thursday or Friday (depending on if it is a close race or not).
Thanks
Gudy
10/10/08--
Hey guys,
I want to know what cool program, functionality, or software you would like to see created. I am a .net programmer (among others) and would like some ideas of projects you would like to see. I would like to stay away from a graphic intense program and involved games, so think functionality, usefulness, fun, etc. If I get some good ideas, I will then add a poll, vote on the best one, then build it. I will release it under my donationware license which means it will be free. Right now I am finishing up my Golf Gps program (and will continue to support), but will start this project once we get it deceided. So Shoot me your ideas!
Gudy
cool a programmer who need ideas
I have proposed something here: http://forum.xda-developers.com/showthread.php?t=434925
though it would maybe not appear as a grateful program for a developper ( a toolkit for other programs), it could be a good way to have a large diffusion through many config panels in different programs
it was just an idea
Wishlist
Hi,
Maybe simple for .NET, but for me impossible to do (without performance/battery penaulty) with basic4ppc or mortscript. And thats all I can handle.
What I would like to have is a program that enables me to execute programs when specific events occur. I'd like to know when AC power gets connected/disconnected, when there is a change in screen orientation, and when a headset gets connected/disconnected and so on. Maybe even when an internet connection through WIFI is available/unavailable.
Also I'd like to know is a specific BT device is connectable/conneted. I'd like to know if a specific WIFI network is connectable/connected. I'd like to know if I'm at a specific location. All event driven, without a performance consuming programing loop or battery drain.
Yeah, all or even some of those options would make my digital mobile life so much easier
Good luck huntig for input, if you ever get bored contact me and make me happy
Cheers,
Cacti
le_cactus said:
Hi,
Maybe simple for .NET, but for me impossible to do (without performance/battery penaulty) with basic4ppc or mortscript. And thats all I can handle.
What I would like to have is a program that enables me to execute programs when specific events occur. I'd like to know when AC power gets connected/disconnected, when there is a change in screen orientation, and when a headset gets connected/disconnected and so on. Maybe even when an internet connection through WIFI is available/unavailable.
Also I'd like to know is a specific BT device is connectable/conneted. I'd like to know if a specific WIFI network is connectable/connected. I'd like to know if I'm at a specific location. All event driven, without a performance consuming programing loop or battery drain.
Yeah, all or even some of those options would make my digital mobile life so much easier
Good luck huntig for input, if you ever get bored contact me and make me happy
Cheers,
Cacti
Click to expand...
Click to collapse
Doable, handy, not a massive undertaking, I like it! Not sure I would go the .net route on something like this, as really a GUI is not required (except for settings maybe) and the overhead is large with .net. Certainly will add it to the list. Keep them coming!!
t0k0m0k0 said:
cool a programmer who need ideas
I have proposed something here: http://forum.xda-developers.com/showthread.php?t=434925
though it would maybe not appear as a grateful program for a developper ( a toolkit for other programs), it could be a good way to have a large diffusion through many config panels in different programs
it was just an idea
Click to expand...
Click to collapse
This would be pretty difficult unless all of developers used the same programming langauge/technique. The only real feasable way I see this working would be developers using a common set of graphics. That would be more of a graphic undertaking instead of programming. I do like the idea, but pretty hard to impliment.
Thanks
Gudy
I would love to see something like Launchy for launching apps and files etc. as well as quick search of various types online. I'm guessing the on the fly search would require too much processing power, but if it's doable it would be awesome.
http://www.launchy.net/
I'm interested in new ideas too. I also use B4PPC.
Here's a few ideas:
-A tamagotchi, really. I was about to try this out tonight but Paint hates me.
-An app launcher like PetitLaunch on PalmOS. It's something that can pop from any app (hardware button) and when you type in extra letters it filters which apps are shown. I got this started and I can give you the files if you want.
-Pursue the development for Tippy. The source is on Nicbou.com/downloads if you want it.
-A time clock. A friend of mine notes down how long he works to make sure he doesn't get screwed and it takes him several minutes every week. He doesn't have a Pocket PC but maybe someone would be interested in something that tracks the hours you work and calculate the salary. I almost did this too.
And don't forget to share the source! If you need any help with B4PPC I'm here
galt said:
I would love to see something like Launchy for launching apps and files etc. as well as quick search of various types online. I'm guessing the on the fly search would require too much processing power, but if it's doable it would be awesome.
http://www.launchy.net/
Click to expand...
Click to collapse
Sounds simular to the app launcher listed in the next post, seems like there is a theme going on here, you all need some sort of good app launcher.
Gudy
I'd like the Launchy features for search-on-the-fly off on board apps and file launching, but ever more for different site searches (google, maps, wikipedia, live, youtube, Amazon, etc).
N1c0_ds said:
I'm interested in new ideas too. I also use B4PPC.
Here's a few ideas:
-A tamagotchi, really. I was about to try this out tonight but Paint hates me.
-An app launcher like PetitLaunch on PalmOS. It's something that can pop from any app (hardware button) and when you type in extra letters it filters which apps are shown. I got this started and I can give you the files if you want.
-Pursue the development for Tippy. The source is on Nicbou.com/downloads if you want it.
-A time clock. A friend of mine notes down how long he works to make sure he doesn't get screwed and it takes him several minutes every week. He doesn't have a Pocket PC but maybe someone would be interested in something that tracks the hours you work and calculate the salary. I almost did this too.
And don't forget to share the source! If you need any help with B4PPC I'm here
Click to expand...
Click to collapse
I had to look up tamagotchi, either I am too old, or just out of the loop to know that 10 million of these things were sold! Wow! That could be fun, but would take a pretty fancy AI type system to really be fun.
A form of Tippy is already out there, 1-calc has some of the features built in already.
A time clock could be cool, maybe a stop watch type thing perhaps?
Never used B4PPC, I mainly use C# and Visual Studio. It looks like the old Visual Basic for desktops. And last but not least, depending on the project, I more than likely will release the source.
Thanks!!! Keep'em comin!
Gudy
File Explorer Needs Help
Has anyone wanted to see a preview image in explorer's folder??
I'm not talking about fexplorerext2. although it is a fantastic enhancement; it takes a long time to load the preview immages.
I have a better idea (well, actualy MS thought of it first)
THUMBS.DB
for every folder that has an image file, this dll is created to replace cache of images. this way ou do not have to load it everytime and scale them down for thumbnail view. it is already there specificaly for each folder.
This alows the explorer to show a preview of the first image in the folder (or last created/accessed)
This is whatt I think WinMo is lacking - windows. lol.
I do not care much for the tabbed browsing. it hurts my head. too much scroling and not enough info. Icons work better I think, and waste less space on an already small screen.
well, that's been on my wishlist for a very long time. a dll that ataches to the already existing explorer making it work better.
Thanks for workin g on something new
program that makes led lights flash when phone rings would be nice
Interesting...I will have to think about how to tackle that. It would basically take a new file explorer (like total commander). This might be a bit larger than I want to tackle, but will research it a bit before ruling it out.
GUdy
bedaweed said:
program that makes led lights flash when phone rings would be nice
Click to expand...
Click to collapse
This would be very difficult as not every device handles the leds the same. Also, not every device has the same leds (color, # of, etc). I think No2Chem has a int. driver, but think it is only for the titan. Would be cool though...
Gudy
a system-wide launcher dock program like that on the velocity 103 PPC..
here's the URL for the review and video of the app (and the phone)
-------------------------------------------------------------
a new top bar replacemeent/notification system much like the "android Notification Drawer" it can replace the bubble (multiple) notifications icon when you got multiple and simultaneous notifications.. and also make it finger friendly (unlike M2D, no need to go back to homescreen to check email/sms previes and also calendar events, calls, etc.. also unlike big taskbar - from the touch phones, this'll have previews)
video: http://www.youtube.com/watch?v=z7qbPa1O8Ys&eur (at the 2 minute mark) , http://www.youtube.com/watch?v=hy-YcGNyJds
mjg7876 said:
Interesting...I will have to think about how to tackle that. It would basically take a new file explorer (like total commander). This might be a bit larger than I want to tackle, but will research it a bit before ruling it out.
GUdy
Click to expand...
Click to collapse
Fexplorer2 is basically a dll that works with the original file explorer context menu. there is a small exe that overwrites the original explorer to make it think that the explorer"s context menu has already been opened.
in a way it maybe possible to write a new dll and two exe
EXE 1 to replace the file explorer
EXE 2 to make thumbs db
DLL (conte4xt menu that alows to view as thumbnails/list etc ; as well as launching the second exe to make a thumbsdb)
maybe you can get some help from Hou Ming, the guy that made that program before.
it would be cool if you could get some of the old emus like pocket gba and pocket snes with window 6.1 I know i would be happy.
le_cactus said:
... when AC power gets connected/disconnected, when there is a change in screen orientation, and when a headset gets connected/disconnected and ...
Click to expand...
Click to collapse
I have been looking for a program that would stop the music (S2P, Audio Manager, or WMP etc...) if during playback of the music the headset is removed. Or for instance, when the device is on vibrate and you connect headset, it automatically changes profile to normal or something.
Another one is when I dock my device (or connect AC basically), I'd like clock program (or home screen, or photo slideshow, etc...) to come up automatically.
A feature that I miss from my older phones is the ability to set them to beep every minute during a phone call.
Now these are very general and not specific features. If you have any questions, don't hesitate to contact me!
Thank you,
SiNAra
ytsejam_ said:
a system-wide launcher dock program like that on the velocity 103 PPC..
here's the URL for the review and video of the app (and the phone)
-------------------------------------------------------------
a new top bar replacemeent/notification system much like the "android Notification Drawer" it can replace the bubble (multiple) notifications icon when you got multiple and simultaneous notifications.. and also make it finger friendly (unlike M2D, no need to go back to homescreen to check email/sms previes and also calendar events, calls, etc.. also unlike big taskbar - from the touch phones, this'll have previews)
video: http://www.youtube.com/watch?v=z7qbPa1O8Ys&eur (at the 2 minute mark) , http://www.youtube.com/watch?v=hy-YcGNyJds
Click to expand...
Click to collapse
The launcher on the 103 looks a lot like manilla, I know it is diff, but to me it seems mainly by presentation, not functionality. I do however like the notification top bar like that on android. Not sure how difficult taking over the top bar would be. I will do some digging.
S.V.I said:
Fexplorer2 is basically a dll that works with the original file explorer context menu. there is a small exe that overwrites the original explorer to make it think that the explorer"s context menu has already been opened.
in a way it maybe possible to write a new dll and two exe
EXE 1 to replace the file explorer
EXE 2 to make thumbs db
DLL (conte4xt menu that alows to view as thumbnails/list etc ; as well as launching the second exe to make a thumbsdb)
maybe you can get some help from Hou Ming, the guy that made that program before.
Click to expand...
Click to collapse
Can you give me a link to this? The only thing I could find (quickly) was sketchy at best. Still seems a bit much, but would like to know more about this Fexplorer2 thing before nuking the idea.
Gudy
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.
Eg, when using Task Manager on PC, i go to the CPU prosess tab and now im able to change the CPU priority of any program to: very high/high/medium/low/very low.
Can we do this with WM?
Rn
You can set the priority level of a thread, not of a process.
The system scheduler works quite different from desktop Windows. A thread with a priority level above normal can lock the entire system. An application must be designed very well if it want to change the priority level of one of its threads.
...
id like to 'trial and error'.
i understand the risk of locking the system = my own fault if it does.
but id still like to know your info about the system scheduler and changing the priorties please.
even if i cant get it to do what i want, ill still learn something new
Rn
ps, thanks for your reply
raving_nanza said:
but id still like to know your info about the system scheduler and changing the priorties please.
Click to expand...
Click to collapse
Here you find to both subjects a very good answer.
Just install dotfred's task manager, and set the priorities with it. If you screw up, it doesn't matter. A soft reset restores them to the stock configuration.
...
cheers dude, ill download and try it now.
Rn
update
i tried dot fred TM, but didnt like it though :/
cant i just add a .reg for each specific program that i want to have a higher cpu priority?
eg, something like this:
Dword="priority256", Value="XXX"
("XXX" = eg: "255" is normal priority)
???
Rn
raving_nanza said:
i tried dot fred TM, but didnt like it though :/
cant i just add a .reg for each specific program that i want to have a higher cpu priority?
eg, something like this:
Dword="priority256", Value="XXX"
("XXX" = eg: "255" is normal priority)
???
Rn
Click to expand...
Click to collapse
Not that I'm aware of; this stuff isn't set in the registry, except for a few thread priorities for the file system that are in the boot.rgu, and aren't user accessible. You can get a program called Speedbooster that will automatically watch for specific processes opening, and will then adjust thread priorities to however you want them. Wait, I'll save you the time and money, because it sucks. It changes all thread priorities for a given process, and most of the time makes things worse instead of better. You're better off just doing it with a task manager manually for a while, and then giving up and realizing it's a waste of time. Lol.
...
Farmer Ted said:
Wait, I'll save you the time and money, because it sucks. It changes all thread priorities for a given process, and most of the time makes things worse instead of better.
Click to expand...
Click to collapse
Yeah i already found SpeedBooster on google but its not freeware, which cant be cooked into roms
I suppose it would be cool if someone develops an app dedicated to do this = no task manager, no nonsense, no nothing, just a simple small app which lets you select a program and set its priority.. Simples!
Farmer Ted said:
and then giving up and realizing it's a waste of time. Lol.
Click to expand...
Click to collapse
Basicly i wanted to increase the priority of Total Commander and Opera10 because their the main two programs i use. (probably the main two programs everyone uses.)
I think your right though dude, ill take your advice and give up now before i do waste my time, my precious ORD time! lol
Cheers dude!
Rn
I tried increasing the priorities of PIE and UCWEB with sppedbooster, and the problem is that it slows down finger-scrolling dramatically, to the point that the browsers were unusable. You can make a sppedbooster package, but just not distribute it. I cooked it in for a while, when I was determined to convince myself I hadn't blown twenty bucks on a piece of crap.
Why do you need to speed up total commander? I use it all the time, too, and it's pretty snappy. I'd suggest limiting the number of processes and not using manila to optimize speed.
...
Farmer Ted said:
I tried increasing the priorities of PIE and UCWEB with sppedbooster, and the problem is that it slows down finger-scrolling dramatically, to the point that the browsers were unusable. You can make a sppedbooster package, but just not distribute it. I cooked it in for a while, when I was determined to convince myself I hadn't blown twenty bucks on a piece of crap. Why do you need to speed up total commander? I use it all the time, too, and it's pretty snappy. I'd suggest limiting the number of processes and not using manila to optimize speed.
Click to expand...
Click to collapse
i wanted to speed up total commander because its slow at accessing some folders eg, accessing the windows folder, there is a lag i dont like waiting for and increasing the cpu priorities for TC would reduce this lag
ive deleted the manila package, it eats up way too much storage/ram, so iv made my own skin for a today screen, which is aprox 1mb.
obviously manila is eye candy but im prepared to loose it for the increase in storage/ram.
i also didnt want manila in my rom due to the fact i dont actually like it, ok some stuff is cool eg, album and audio manager the way they rotate and the slide effect but its so gdam popular so most roms look the same, i wanted my rom to be differant. (i didnt want to be a sheep )
you gave me an idea for increasing the touch velocity of the finger scrolling, could anyone tell me whats the highest velocity were able to use?
(both up and down velocities? )
is there one for left and right?
(obviously there must be, but do you know whats it called so i can find it?)
thanks again dude!
Rn
The easiest way to speed up access to the windows folder is just to select 'hide files in rom' in the settings. Then you can get into it quickly. Looking at rom files is pretty useless most of the time, anyway. The downside is that TC then doesn't show the plugins folder in the device root. You can also set shortcuts on the hotlist to folders you might want to access, like startup or the start menu. Finally, you can just limit the number of rom files during cooking to speed things up; the fewer the better, obviously.
...
Farmer Ted said:
The easiest way to speed up access to the windows folder is just to select 'hide files in rom' in the settings. Then you can get into it quickly. Looking at rom files is pretty useless most of the time, anyway.
The downside is that TC then doesn't show the plugins folder in the device root. You can also set shortcuts on the hotlist to folders you might want to access, like startup or the start menu. Finally, you can just limit the number of rom files during cooking to speed things up; the fewer the better, obviously.
Click to expand...
Click to collapse
id rather have everything viewable in the rom rather than to hide files, useless or not. im sure everyone else would probably do the same, that way you can see exactly what you have got.
i also like to have hidden files always viewable on my pc too. eg, in my kitchen nothing is hidden, ive went through every folder and almost every file has had its hidden properties removed, including the files that dont un-hide when using the hidden files toggle on pc, which was weird
the plugin folder is one of the main functions i use TC for as i dont use regedit.exe or any other registry viewer other than TC. so i wouldnt want to be dissabling that function, if i dissable it i may as well add fexplore.exe back into the rom and use that instead
yeah, thats one of the good things about TC = the ability to create shortcuts with the >>>, however i always make them myself with a good old .txt file with the link wrote inside
agreed, the less files the better, obviously lol
at the moment my rom for blackstone is 103mb ... storage is aprox (18 - 20mb) ... ram is aprox (40 - 50mb) in use after the initial first boot and customisation.
ill search my kitchen for the finger velocity up/down scroll tonight.
if i can improve the scroll ill be nbecause the scroll is really crap!
Rn
btw:
if anyone wants to Alpha test my rom then private message me because i wont be uploading it for public use untill its Beta.
im just finishing the today screen skin but ill start letting people Alpha test it after that.
(basicly to find bugs, recomendations bla bla bla.)
I totally forgot this, but the process manager in sk tools has an option to create shortcuts with a command line that will change priorities. You could create one for total commander, and then use a mortscript that would launch TC, maybe wait a few seconds, then run the shortcut to bump up the priority.