Hey guys, I just got an 818 pro, may I know my dopod is G3 or G4?
IPL 2.15
SPL 2.15.000
GSM 02.19.21
OS 2.15.1327
It's G3.
If you had SPL 2.15.0001 then your's PDA was G4
Look at Wiki
So you want to know if you have a G3 or a G4 Model of your Prophet ?
Basiclly what G3/G4 means it the type of DOC used (Disk On Chip)
Soft reset your Prophet (insert the stylus into the little hole on the bottom of your Prophet (to the left of the mini-USB connector)
When your prophet boots up, it will show you a number of things in red text.
For Example:
IPL: 2.09.000
SPL: 2.20.000
GSM: 02.47.21
OS: 2.20.7.34
If you look at the IPL and SPL numbers, you'll see they end in .000 in this case your phone in a G3 model.
So, in short:
IPL/SPL: ending in .000 = G3 model
IPL/SPL: ending in .0001 = G4 model
P.S.
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
Flashed and it rox, thanks
IPL/SPL: ending in .000 = G3 model
IPL/SPL: ending in .0001 = G4 model
CHECK IT
Related
hiya folks,
how do i tell if my xda mini s is a G3 or G4?
best regards,
--me
nitr8 said:
hiya folks,
how do i tell if my xda mini s is a G3 or G4?
best regards,
--me
Click to expand...
Click to collapse
when you boot up it will give you an IPL/SPL... if its a G4 your phone will have .0001 at the end of it, example IPL 2.26.0001 SPL 2.26.0001.. a G3 will not have those, example IPL 2.26
thanks shogunmark,
--me
now a better question, what is the difference between G4 and G3 units?
what's funny is that before i upgraded my ROM to the current 2.26, i could have sworn i would always see a .0001 attached to the first and second line. After the upgrade, it doesn't show like that anymore.
Also, what if my unit says IPL 2.13.0000 instead of 0001? Is this a G4 or G3
laca4025 said:
Also, what if my unit says IPL 2.13.0000 instead of 0001? Is this a G4 or G3
Click to expand...
Click to collapse
i believe that if you have any kind of .0000 or .0001 etc that its a G4, none of the G3's have that..
Excuse me if in wrong section, but I have a QTEK S200 (Prophet) with the following bootsplash data:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.29
I guess it's a G3 version, as IPL doesn't have any trailing zeroes, but could you please confirm that ?
I have a bootsplash lockup problem with the sonar single pulse noise, and afaik the first thing to know is the "G" level.
Thanks for any further hint, btw
Val3r10 said:
Excuse me if in wrong section, but I have a QTEK S200 (Prophet) with the following bootsplash data:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.29
I guess it's a G3 version, as IPL doesn't have any trailing zeroes, but could you please confirm that ?
I have a bootsplash lockup problem with the sonar single pulse noise, and afaik the first thing to know is the "G" level.
Thanks for any further hint, btw
Click to expand...
Click to collapse
G3 is x.xx or x.xx.0000
G4 is x.xx.0001
--M
IPL 2.21.0001
SPL 2.21.0lip
GSM 02.25.11
OS 6.0.0.1
http://wiki.xda-developers.com/index.php?pagename=Wizard_Versions
Next time, please do a search FIRST.
i just find it out later thanks
Hey,
I want to flash WM6 on my Wizard, I have read a lot of this now here in the board but I still have the question what my wizard is. (sry for my bad english -> german)
IPL and SPL are 3.08. Is it a G3 or G4?
greetz kM
g3 or g4?
im pretty sure if your ipl / spl is just 3.08 then its a g3 if however it has .0001 and then end of your ipl / spl then its a g4
for example,
3.08 = g3
3.08.0001 =g4
Looks like a G3 to me my friend, but to be sure, go ahead and download the Wizard Service Tool and run it...let it do its thing, and it will tell you if its a G3 or G4.
Hey, i tested Wizard Service Tool and you are right - its a G3.
Now I want to unlock the CID with Lokiwiz0.2. First I had downgraded the IPL an d SPL - ok, I tryed. Now my IPL is 1.5 and my SPL is 3.08. -.-
What happend?
edit:Now I tried the Guide from Dr Puttingham with Buttons 1.05-Rom. The self - IPL: 1.05 and SPL still 3.08.
edit2: OK,NOW I HAVE IPL AND SPL at 1.01!!! Now I can flash. YEAH! ^^
g3 or g4
my ipl 2.26
my spl 2.6
it is g3 or g4
need helpppppp
thanks
use wizard service tool..
hi,
i wonder how is different between G3 and G4?
how can i notice whether my ppc is G3 or G4?
thanks!!!!
my spl and ipl is 1.08 os 6.5.0.0
mengly said:
hi,
i wonder how is different between G3 and G4?
how can i notice whether my ppc is G3 or G4?
thanks!!!!
my spl and ipl is 1.08 os 6.5.0.0
Click to expand...
Click to collapse
Read the tutorials that are sticky.
They explain how you can tell the difference by the IPL/SPL versions.
Yours appears to be G3, but judge for yourself.
A good starting place:
http://forum.xda-developers.com/showthread.php?t=285435
pls help me if this is g3 or g4
wiza 200
ipl 2.21.0001
spl 2.21.olip
is this g3 or g4 pls help me
eseosa said:
pls help me if this is g3 or g4
wiza 200
ipl 2.21.0001
spl 2.21.olip
is this g3 or g4 pls help me
Click to expand...
Click to collapse
your device is Htc Wizard G4 because the IPL / SPL it consists of three zeros {2.21.0001/2.21.olip}
for more details you should refer to this thread http://forum.xda-developers.com/showthread.php?t=305225