Related
hi all,
i've got the problem that my jam doesn't ring the bell by incoming calls. After incoming call ends, i can see on my jam unsanswered call sign.
After unsinstall wisbar advanced 2, the ring bells by incoming calls. Can anbody help?
wis BAR!!!
so... here is the solution! REMOVE THIS PROGRAM.. this program is designed for standar pocket pc's and PDA's. Not for ppc Phone editions!!! i had the same problem with my O2 xda 2 mini
I'm not sure how relevant this is but I use the XDaIIi which I think is the same model as yours, if so you need to get the beta version of WA2. I would suggest 2.0.1.17 beta, this is because it was designed to work with this generation of PPC/phones. There are other versions available but I,m not sure of their stability. I have tried the very latest and it kept losing my today screen shortcuts SPB etc..
Anyway hope this wasn't too long a ramble. WA is an excellent piece of software highly recommended.
Pete
i use wisbar advanced 2.2017 version. so i'm wondering why the new version doesn't work. ok i will look for the 2.0.1.17 beta. i hope it will work. thx.
Re: wis BAR!!!
vaggelis said:
so... here is the solution! REMOVE THIS PROGRAM.. this program is designed for standar pocket pc's and PDA's. Not for ppc Phone editions!!! i had the same problem with my O2 xda 2 mini
Click to expand...
Click to collapse
I have it on my Imate Jam and it works fine. You have to use the latest version which can be found at Lakeridge Software Forums.
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=3077
@ vaggelis:
It seems you are not up to date with Wisbar Advanced 2 so i think you shouldn't say such things, when you don't have full information, cause this is misleading for others.
same problem with 2.0.17 beta version. now i will look for the newest version in the link that xcilion gave. thx. xcilion.
heureka ,it works.
thanks xcilion
serhataga said:
heureka ,it works.
thanks xcilion
Click to expand...
Click to collapse
Glad to hear that . Your welcome.
hi all,
i have done the clean install, without the O2 cabs
but i need to install smart dialer as i use my exec turned with the screen facing outwards..
any suggestions on how to get smart dial workin??
thanx,
frz
Sorry for slightly drifting from your real question but do give Imaginet-Fingerclix a try. Though slightly sluggish it provides nice large keys both in Landscape and portrait for convenient finger tapping as well as the ability to send SMS from the same screen.
Regards
thanx smrz,
but i have a large contact database and need to find the numbers of different contacts as it would be really difficult to remember all
thus i need smartdial
i have another program called
quick contacts
Click to expand...
Click to collapse
but it needs smart dialing installed to work..
thanx,
frz
Just install this CAB in Extended_ROM
Enable_VT_RTPlugin_0727_2_signed.CAB
I had managed with this problem within 1 week!
thanx, pocket
will the intellidialer also work?
regards,
frz
Do you mean Smart dialing? Smart dialing is intergrated in this CAB
Hi!
When I upgraded to the new HTC Artemis I let my wife inherit my Magician, but she is not that in to PPC, so the question is:
Is there a skin suit (WisBar Adv Desktop or something) available that could make the phone more like a "normal" cell phone? She does not realy need all the fancy suff, but she uses tomtom, media player, SMS, MMS, Phone, Contacts, Calendar, IE, phonealarm profiles and phonealarm MMS, SMS, missed call notifications.
Preferably all functions should be available from today screen as large icons.
PK
Seach for the Orange today plugin. Make it looks very much like a normal phone (that's why I don't use it )
Link here
http://forum.xda-developers.com/showthread.php?t=276425
I've tested it on my WM5, not sure if (it should) work on WM2003
hanmin said:
Seach for the Orange today plugin. Make it looks very much like a normal phone (that's why I don't use it )
Link here
http://forum.xda-developers.com/showthread.php?t=276425
I've tested it on my WM5, not sure if (it should) work on WM2003
Click to expand...
Click to collapse
Thanks!
This is just what I'm looking for, sadly it does not run on PPC2003SE :-(
I guess the same thing could be made as a WisBar theme, maybe it already is, but just hard to find ;-)
PK
You might just want to look around for any old thread/forum/post that has this Orange plugin. As Orange does have a Magician release that has that today plug-in (eg they DO have a plugin for 2003). Good luck.
paalkr said:
Is there a skin suit (WisBar Adv Desktop or something) available that could make the phone more like a "normal" cell phone?
Click to expand...
Click to collapse
The answer to your question is in your question itselft - Wisbar Adv Desktop.
zerimar said:
The answer to your question is in your question itselft - Wisbar Adv Desktop.
Click to expand...
Click to collapse
Hi!
Yes I know, but I'm looking for a skin to the WisBar adv desktop software pack.
PK
I'm not sure if this helps, but if you were to use cLaunch to set up the Today screen .. 'nicely', you may able to make it looks simplier. Take a look at the iPhone cLaunch skin here. Note: cLaunch maybe a bit troublesome to setup.
hanmin said:
You might just want to look around for any old thread/forum/post that has this Orange plugin. As Orange does have a Magician release that has that today plug-in (eg they DO have a plugin for 2003). Good luck.
Click to expand...
Click to collapse
Hi!
I have looked all over XDA and used Google, but don't mange to find it! Can anyone pleas post the CAB? I can’t find the ROM on the FTP either.
PK
I've found this wonderful plugin...
but I cann't test it now cause I'm not at home....
please test and "feedback" ....
The Atom V is a device, not a today plugin
http://www.pdadb.net/index.php?m=specs&id=1020
The plugin doesn't work on non atom V devices. If someone owns an atom V and can get me either a dump or a registry backup, I may be able to work out what it checks the device name against, and so patch it, or the devices for it to work.
It works on my qtek 2020, but seems not be a plugin.
Install and run GBCShell.WMobile.exe.
But i'm not able to personalize it.
hmmzz, i tought i already saw that pic somewhere else.
http://forum.xda-developers.com/showpost.php?p=2131605&postcount=84
in the Gsmart touch thread a "new" today plugin.
/me wonders wich one was first
Greetz.
I think they both have the same today button launcher. I will try this and see if it wotks...
Works Perfect on the sprint mogul its Fkin sick. Thanks so much to whoever post this best today ever besides like 4 others.
Thanks it is good
Has anybody tried it to install on Touch Elfin?
Quicklist.exe
i think we need a *.exe called quicklist.exe, because some icons are linked to this *.exe placed in windows
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.