hello friends.
i have qtek1010 and i was upgrade wm2002 to wm2003 final,but i want wm2003se.
i try to upgrade my pda,its run error,it's say "cannot execute the remote communication program.please make sure that usb/serial cable is properly connected"
my rom version 4.02.04ENG
rom date 8/24/05
radio version 3.25.00
please somebody help me,i want wm2003se,what i do now?thanks for all and sorry my english.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
sorry friends but i don't understand somethings in this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
for example:
"xda os image tool" is want "source" and "destination"..
my source is "installer.exe" from the http://www.romkitchen.de/ ,it isn't .nb1
which m i choosen?wm2003final(there is nb.1) or wm2003se(there isn't nb.1 but i want this version)
and "destination section" is wanted .nb1 , my sd card there isn't anyone.
what m i do?m i download the wm2003final.cb1 and its copy to sd card??
poffff,what m i do now?
thank you again.
if you rename the exe to zip you can copy out the nb1 or nbf file or what ever
one can only use the tool to get the rom to the sd card windows copy dont work
i flashed many times using this guide to the step
Related
Hello
I have a serious problem with my XDA Qtek 1010 on the radio part.
In the bootloader i got " GSM ERROR" due to an error in flashing procedure.
I can back-up my ROM and bootloader and GSM part as well.
The problem is that I have found a lot of files to flash my ROM part bu nothing for the RADIO part.
Is there anyone so kind to help me and send a file ( or a link to download from ) from the radio part ( in SD format ) ?
Thanks,
Silviu C.
It would help if we knew what Radio stack you were running before the upgrade?
radio version before upgrade
I am not sure about initial radio version. It was an upgrade that is for sure.
please help me
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Qman said:
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Click to expand...
Click to collapse
Thanks for your advice
Still not working
Hanging to 1%.
Please advice
Silviu C.
Ok locate and copy the below files to your devices windows folder and run RSUpgrade.exe to restart the upgrade. (note this is an old method but it might still work).
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
also take a look at the below thread:
http://forum.xda-developers.com/viewtopic.php?t=4123
HTH
I want one
I Syncronized the XDAUNLOCK to my AT&T SX56 but when I tried to run it I got "error getting unlock code" can you help...
Thanks :roll:
Backup your existing rom to sd card, install developers rom special edition, this will unlock the phone, then flash original rom from sd using bootloader method.
need to unlock sx56
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it
2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
from this new kitchen http://xda.weblink.net/ i was able to create a nk[1].nb1 rom made by chosing my current rom version does anyone know if it will unlock my phone
we getting ready to move to an area where att has no signal so i will need to stop my service with them and sign up with another provider ...
thanks in advance
Re: need to unlock sx56
les said:
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it 2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
Click to expand...
Click to collapse
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file! :wink:
HTH
thanks for the reply
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file!
Click to expand...
Click to collapse
i extracted the exe file to a new folder but there was not an .nbf file or at least i couldn't find one :?: :!: :?:
thanks
there is a subfolder named english. The NK lives there.
i found the nbf file i had to extract onto itself
i'm using the bootloader to do flash the new rom to my phone
i'm at the step where the device is suppose to recognize a new rom on my sd card
i copied the nbf file using xdarit
i plugged the card back into the pda
now i start the wallaby bootloader im running v5.15 it supposedly should recognize the new rom well the instructions say to copy the .nb1 file on the card but with the extraction method i could only get a .nbf is that why it's not being recognized
thanks
thanks guys my phone is free .... free as in unlocked
these are the steps i took
someone can do in 30 mn what i did in 1 day
-backed up my rom onto a sd card with wallaby bootloader v5.15
-using the xdarit i downloaded my old rom on my PC
-cooked a new rom with xdaunlock at yorch.net
-couldn't create a .nb1 or .nbf file so i took the .exe rom
-with winzip extracted the newly dowloaded rom onto itself to get the nk.nbf file to be flashed (when i extracted it on a new folder there was no nk file listed, so i went back to the kitchen cooked another rom saved the exe "et voila")
-i couldn't get the newly upgraded rom to be recognized when using the bootloader
-downloaded the xdatools to copy the nk file on sd card (i was unable to pick my sd card reader as a destination -weird stuff) so i did this
-from the english folder Abbas is talking about above i right click the nk file to copy it to SD card and xdatools was launched automatically
-plugged the sd card in the phone and started the bootloader v5.15 and instantly the rom on the sd card was recognized
-press action to download it
-cold reboot ( the battery on/off, erase all)
Re: thanks guys my phone is free .... free as in unlocked
hi less
i have siemens sx56 too (it arrived just today)
model : PW10B1
platform : Pocket PC
IMEI : 350314010468370
ROM v. : A.30.09 ENG
Radio v. : A.33.02
Protocol v. : 1.3.3
i want to unlock at&t wireless in order to use another provider.
im new here.
can u explain more about how to unlock the sx56. i'm still confused with your explanation. detail?? (like how to backed up your rom onto a sd card with wallaby bootloader v5.15 ... etc)
make astep by step... please
here you are
http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=bootloader
unlock simens sx56
thanks for reply les
i still afraid to try it. is that realy save?
sorry for my bad english
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them.
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them
Click to expand...
Click to collapse
Maybe they should downgrade their radio, then unlock and then upgrade the radio and rom again. I think that is the new tool cgigate developed!
I am a newbie,can you kindly tell me how to flash rom by SD card in detail. because my bootloader is 5.17. i can't go back to 2002 rom use the xdatool.
thanks!
Hi mate,
plz check this thread ... let me know if you still have problems
note: XDAtools replaced XDrit tool ... so you can follow the same steps.
Thanks you very much, before I flashed the T-M 401.16 rom, I have backup my 2002 rom as .NB1 file, is it possible to copy it to my sd card directly, and then follow the steps?
can it work?
Yes, it should work ... but if your final target is WM2003 ROM, that would be an unnecessary step ... cook your WM2003 ROM from the kitchen as .nbf file and go ahead ... of course unless you need the wmodem.exe which is found only on PPC2002 ROMs
should i downgrade the radio version when i want take my o2 mini to warranty?IF so,how to downgrade the radio version,i have try upgrade the rom and downgrade back,but it's there a way to downgrade the radion version? i am newbie so hope can learn more thing here sorry for my poor english. Have a nice day!
no one can help?
I can help!
The reason why the radio is not downgraded is because the ROM backup actually doesn't downgrade radio at all.
Now, the way to do it properly is to first grab whatever ROM package you want (I grabbed an Imate JAM v 1.01 ship). Then you extract the files in the .exe file to a folder. Delete all the nbf files except "radio.nbf" then use MaUpgradeUt_noID.
Basically, by deleting the other nbf files, you are only upgrading/downgrading the ROM.
TQ 4 Da Tips !
thanks friend!cheers!!
Extracting files from .exe
Hi HighPingBastard,
Call me blone ... how do you extract the files inside a .exe (rom .exe) file.
thanks
<KK>
right click on the ROM file and select extract ......
hth
jim
i have downloaded the portuguese rom FROM FTP for the wizard ,it has 2 file radio.nba and os.nba,now when a try to write them to an sd card with ntrw.exe i get thi error,{could not lock xxx.nba---access is denied}
or is there any other way of installing this rom in my machine?
i also have noticed that everyone refers to files extencions like nb1 where this rom comes with nba.could someone please help thank you