I Syncronized the XDAUNLOCK to my AT&T SX56 but when I tried to run it I got "error getting unlock code" can you help...
Thanks :roll:
Backup your existing rom to sd card, install developers rom special edition, this will unlock the phone, then flash original rom from sd using bootloader method.
need to unlock sx56
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it
2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
from this new kitchen http://xda.weblink.net/ i was able to create a nk[1].nb1 rom made by chosing my current rom version does anyone know if it will unlock my phone
we getting ready to move to an area where att has no signal so i will need to stop my service with them and sign up with another provider ...
thanks in advance
Re: need to unlock sx56
les said:
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it 2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
Click to expand...
Click to collapse
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file! :wink:
HTH
thanks for the reply
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file!
Click to expand...
Click to collapse
i extracted the exe file to a new folder but there was not an .nbf file or at least i couldn't find one :?: :!: :?:
thanks
there is a subfolder named english. The NK lives there.
i found the nbf file i had to extract onto itself
i'm using the bootloader to do flash the new rom to my phone
i'm at the step where the device is suppose to recognize a new rom on my sd card
i copied the nbf file using xdarit
i plugged the card back into the pda
now i start the wallaby bootloader im running v5.15 it supposedly should recognize the new rom well the instructions say to copy the .nb1 file on the card but with the extraction method i could only get a .nbf is that why it's not being recognized
thanks
thanks guys my phone is free .... free as in unlocked
these are the steps i took
someone can do in 30 mn what i did in 1 day
-backed up my rom onto a sd card with wallaby bootloader v5.15
-using the xdarit i downloaded my old rom on my PC
-cooked a new rom with xdaunlock at yorch.net
-couldn't create a .nb1 or .nbf file so i took the .exe rom
-with winzip extracted the newly dowloaded rom onto itself to get the nk.nbf file to be flashed (when i extracted it on a new folder there was no nk file listed, so i went back to the kitchen cooked another rom saved the exe "et voila")
-i couldn't get the newly upgraded rom to be recognized when using the bootloader
-downloaded the xdatools to copy the nk file on sd card (i was unable to pick my sd card reader as a destination -weird stuff) so i did this
-from the english folder Abbas is talking about above i right click the nk file to copy it to SD card and xdatools was launched automatically
-plugged the sd card in the phone and started the bootloader v5.15 and instantly the rom on the sd card was recognized
-press action to download it
-cold reboot ( the battery on/off, erase all)
Re: thanks guys my phone is free .... free as in unlocked
hi less
i have siemens sx56 too (it arrived just today)
model : PW10B1
platform : Pocket PC
IMEI : 350314010468370
ROM v. : A.30.09 ENG
Radio v. : A.33.02
Protocol v. : 1.3.3
i want to unlock at&t wireless in order to use another provider.
im new here.
can u explain more about how to unlock the sx56. i'm still confused with your explanation. detail?? (like how to backed up your rom onto a sd card with wallaby bootloader v5.15 ... etc)
make astep by step... please
here you are
http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=bootloader
unlock simens sx56
thanks for reply les
i still afraid to try it. is that realy save?
sorry for my bad english
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them.
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them
Click to expand...
Click to collapse
Maybe they should downgrade their radio, then unlock and then upgrade the radio and rom again. I think that is the new tool cgigate developed!
Related
OK. I have extracted the the RSU from a t-mobile xda using the xda manipulator expert mode.
Now if only we could figure out how to convert it to an RSUpgrade.cp64 format, then we should be able to use the RSUpgrade.exe utility to flash the GSM rom with the converted file.
Does anyone know how to do this??? :?
Wade
Hmm.. I have no idea but I am in need of GSM ROM. I tried the usual flash method of RSUpgrade utility without any luck and left my xda useless...
can you share your GSM ROM file?
PLease share your GSM ROM file was readed from yout XDA.
I will tell you if there is any conversion to be made and how to.
thaks,
Silviu C
new ROM upgrade with radio_.nbf file
codectelecom: have you cheked this file: http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
I tried to run the program but as usual got the POWER NOT PLUGGED IN error message due to our devices problems, but was wondering if you could study more as the programs consisted of 3 nbf files: ms.nbf, NK.nbf and radio_.nbf.
I extracted the files but was not able to write any of them to the SD card :? neither xda rit nor OSImage tools would accept the files. Is it because they are meant only for xda2?
HAPPY NEW YEAR, BTW
Hello
I have a serious problem with my XDA Qtek 1010 on the radio part.
In the bootloader i got " GSM ERROR" due to an error in flashing procedure.
I can back-up my ROM and bootloader and GSM part as well.
The problem is that I have found a lot of files to flash my ROM part bu nothing for the RADIO part.
Is there anyone so kind to help me and send a file ( or a link to download from ) from the radio part ( in SD format ) ?
Thanks,
Silviu C.
It would help if we knew what Radio stack you were running before the upgrade?
radio version before upgrade
I am not sure about initial radio version. It was an upgrade that is for sure.
please help me
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Qman said:
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Click to expand...
Click to collapse
Thanks for your advice
Still not working
Hanging to 1%.
Please advice
Silviu C.
Ok locate and copy the below files to your devices windows folder and run RSUpgrade.exe to restart the upgrade. (note this is an old method but it might still work).
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
also take a look at the below thread:
http://forum.xda-developers.com/viewtopic.php?t=4123
HTH
I want one
Is here somebody who can give me original or any ROM whitch is fit in to SX56 U.S.A. AT&T ? Model PW10B1 EN . This PPC is 10 days old. That's all I know about numbers :-( :? Thanks very much ! :!:
I have to reflash ROM with SD card.
www.yorch.net
www.yorch.net
cruisin-thru said:
www.yorch.net
Click to expand...
Click to collapse
Yorch's ROM Kitchen is not working
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
original ROM image for AT&T
pdhenry said:
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
Click to expand...
Click to collapse
Thankx much. Now i have everything i need but i have to go buy bigger SD card. My is only 32MB and that's not a enough Thankx again and i will let you know .
Unlock AT&T to ........
pdhenry said:
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
Click to expand...
Click to collapse
OK I fix the ROM problem and SX56 is like new, but is lock. I can't unlock it with XDAunlock. XDAunlock says : " error getting unlock code "
:-(
Now since you have the NK file of your favorit ROM, goto the kitchen again and upgrade to ROM 3.17 which will unlock your device with the first startup ... then you can reflash your device using the NK file.
Since I am still waiting for T-mobile's release of 2003, and not really jazzed about inhereting all of their bloatware, is it safe to upgrade my US Tmobile phone to this new SX56 Upgrade to Windows Mobile 2003 from Siemens? Is there any particular way it should be installed? Can I just use the executable? How do I backup my address book? Or will all of my personal info be preserved?
Can someone inlighten me?
Thanks
Raymond
Need to upgrade both ROM and RS
Pardon the novice question, but if I unzip the exe file, is there a way to upgrade both the ROM and the RS using xdatools? I know about the method to load the SD card with the .nbf file if you just need the ROM, but I need both.
Any tips?
Re: Need to upgrade both ROM and RS
wendelly said:
Pardon the novice question, but if I unzip the exe file, is there a way to upgrade both the ROM and the RS using xdatools? I know about the method to load the SD card with the .nbf file if you just need the ROM, but I need both.
Any tips?
Click to expand...
Click to collapse
For the Radio upgrade copy the below files in your devices windows root folder and run RSUpgrade.exe from File Explorer:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
Note: this is to be done after you complete the ROM upgrade.
HTH
hello friends.
i have qtek1010 and i was upgrade wm2002 to wm2003 final,but i want wm2003se.
i try to upgrade my pda,its run error,it's say "cannot execute the remote communication program.please make sure that usb/serial cable is properly connected"
my rom version 4.02.04ENG
rom date 8/24/05
radio version 3.25.00
please somebody help me,i want wm2003se,what i do now?thanks for all and sorry my english.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
sorry friends but i don't understand somethings in this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
for example:
"xda os image tool" is want "source" and "destination"..
my source is "installer.exe" from the http://www.romkitchen.de/ ,it isn't .nb1
which m i choosen?wm2003final(there is nb.1) or wm2003se(there isn't nb.1 but i want this version)
and "destination section" is wanted .nb1 , my sd card there isn't anyone.
what m i do?m i download the wm2003final.cb1 and its copy to sd card??
poffff,what m i do now?
thank you again.
if you rename the exe to zip you can copy out the nb1 or nbf file or what ever
one can only use the tool to get the rom to the sd card windows copy dont work
i flashed many times using this guide to the step