HTC Wizard as Bluetooth Headset - 8125, K-JAM, P4300, MDA Vario General

Hi,
I've recently upgraded to a vista laptop which has much better bluetooth ability. My computer shows my phone as having 'Voice Gateway' capability. Also, in Skype etc, one of the audio devices is a bluetooth headset. I tried connected to my phone with the voice gateway, and it connected, resulting in Skype switching over to the bluetooth headset. However, I get no sound in/out of my phone. My guess is it needs some kind of software running on the phone, is anyone able to point me in the right direction?
Essentially I want to be able to use my phone as a bluetooth headset for skype, and from the computer end, it looks like it can do that...
Thanks

Related

Using the imate itself as a bluetooth headset

This may sound weird, but does anyone know how to use the imate/xdaII as a bluetooth headset?
I am using pc to phone software and want to be able to wander round the room/house with my imate talking via bluetooth to the PC and to the pc-to-phone software on the PC.
I have a Sony Ericsson HBH-65 bluetooth headset but the battery life is TERRIBLE on it - talking for 30 mins on that will probably render the battery dead!
Looking forward to your comments!
this is not the answer to your querry but something related. when i bond my xda to my pc via bluetooth; to complete the pairing the xda asks you if you want to use the pc as a headset. out of kicks i pressed "ok" and when my phone rang the speaker of my laptop was the one which sounded. the bond between my xda and my o2 headset was gone. had to rebond the laptop and headset again...bottomline is that you can use the laptop as your "headset"...so from there maybe you can work something on the other way around?
cheers
Interesting!! The PC can be recognised by the phone as being a headset. Thanks for the response anyway - perhaps someone can make use of this.
In the bluetooth toolset that I have installed on my PC I can search for all devices that can be used as a headset - the HBH-65 appears in the search, but my XDAII doesn't.
Wondering whether someone has managed to tweak this to work.
regarding: The PC can be recognised by the phone as being a headset.
i haven't tried plugging in a mike on my laptop; which means that if it does work you can actually use your pc as a loudspeaker for conference calls.
regarding: In the bluetooth toolset that I have installed on my PC I can search for all devices that can be used as a headset - the HBH-65 appears in the search, but my XDAII doesn't. - now that's a little strange. i use a bluetooth dongle and when i search for devices my xda comes up and not the headset...
i don't think you can use your regular bt headsets for laptop / pc use; read it in one of the topics here somewhere.
cheers

Emulate HeadSet?

Dear All,
I have been for the past 3 weeks trying to know if it's possible to write an
application that would send/receive the phone audio conversation to a pc if
the device is places on the cradel?
What i want to do is to use my pc's mic and speaker as a headset. I was
thinking that this can be done, since a friend of mine has bluetooth on his
laptop, i paired my phone with his laptop via bluetooth, and one of the
services provided was Audio Gateway, and used his laptop's mic and speakers
as a bluetooth headset.
I wonder how this is implemented since i want to do something like that over
the Cradel connection. or any other media as a matter of fact
Your help is really appreciated
Mustafa Rabie
You've got the answer in your post. Simply get a bluetooth adapter that preferably has widcomm drivers (I know they work like this). Set it up as an audio gateway and pair with it, hopefully you should now be able to use it as a headset.
Is there any pc program to emulate the functions of a bluetooth headset like answer the call or reject it, display the caller number?
hi all thanks for your replies:
fruitloaf - i think u didnt get my question. I want to emulate that, i want to write an application on the PPC Phone that when i answer i can capture the audio convo (mic/speaker) and transfere it to the PC maybe via the pass through when the device is on the cradel.
jacusi1980 - i will write an application on the PC that will handel the answering, dialing, rejecting etc. Which also i would like to know how can i control the answering rejecting etc remotely.
Thanks

Making And Recieving Calls with Computer

Hi all,
I've been trying to figure out a way of using my computers speakers/headset as the headset for my phone.
Basically I work in a shared office and tend to listen to music all day with a closed cup headset and find it quite annoying to take off my headset to receive a call.
I've managed to get my music played form my trinity via A2DP (bluesoleil's audio sink service) to my computers headset, but calls are still left on my device
Is it possible that my computer can act as a headset too? can this be done via USB cable rather then Bluetooth?
Any ideas/pointers would be great!
circuitmonkey said:
Hi all,
I've been trying to figure out a way of using my computers speakers/headset as the headset for my phone.
Basically I work in a shared office and tend to listen to music all day with a closed cup headset and find it quite annoying to take off my headset to receive a call.
I've managed to get my music played form my trinity via A2DP (bluesoleil's audio sink service) to my computers headset, but calls are still left on my device
Is it possible that my computer can act as a headset too? can this be done via USB cable rather then Bluetooth?
Any ideas/pointers would be great!
Click to expand...
Click to collapse
Looking at my computer bluetooth configuration (WinNT with Widcomm BT stack) I can see that in the list of local services supported by the BT stack there is also the "Headset" profile. Enabling that service and pairing your phone to make it use such service should be what you are looking for but honestly I have never tried myself.
PS: You have a different BT stack so first thing you should do is check if you have "headset" profile in the list of local services... if it is not there then I guess you are out of luck.
anonimo said:
Looking at my computer bluetooth configuration (WinNT with Widcomm BT stack) I can see that in the list of local services supported by the BT stack there is also the "Headset" profile. Enabling that service and pairing your phone to make it use such service should be what you are looking for but honestly I have never tried myself.
PS: You have a different BT stack so first thing you should do is check if you have "headset" profile in the list of local services... if it is not there then I guess you are out of luck.
Click to expand...
Click to collapse
Yer, it doesn't look like i have one, might have to try a different bluetooth stack. Shame, bluesoleil looks like a nice simple solution
Thanks for your help

Wizard Bluetooth Handsfree on PC

Hi All,
Here is an unusual one for you guys - you have really helped me out in the past; so here's hoping......
I currently work from home and would like to use my Bluetooth enabled Laptop as a handsfree kit for my Wizard. I suppose in a similar way to an aftermarket in car kit with caller display, contact navigation, dialling from the laptop etc, etc. I have all the stuff i.e. microphone, speakers, bluetooth on my laptop so I don't really want to buy an in-car kit to do the same job.
Is this possible, and how do I do it ??
I synchronise Outlook via Bluetooth, so I have no problem in connecting the two devices.
Just to clarify why I'm looking to do this - I have to place my Wizard in my study window in order to get a decent mobile signal. If I have it on my desk the signal disappears. I make all my business calls on my Wizard, and I am getting seriously fed up with getting up and down around 20 times daily to answer my phone!! Then if I need to refer to some info on my laptop, the signal vanishes when I get to the laptop 'cos I've moved away from the window..aaarrgghhh!!
Here's thanking you all in advance.
Possible Solution
As much as I know, and I understand, It is possible to use your laptop speaker and microphone to answer the calls on your Wizard. To do so,
1-Your laptop must be equiped with the WidComm Bluetooth Hardward and Drivers
2-Pair your Laptop with the Wizard.
3-Go to CommManager on Wizard then Setting > Bluetooth Select your laptop and in services check the handsfree.
4-Allow the full access to Wizard on your Laptop and connect to wizard.
5-You will see the handfree icon on Wizard.
Now on If any call comes you can hear the call on your Laptop speakers and Anwser via Laptop's Mic. But you have to stand up and go to Wizard to accept the call or dial a number. I not know if it is possible to answer from Laptop.
Thanks.
Thanks for the response Hacken.
I have also found this:
http://www.blueshareware.com/bluetooth_pc_dialer.asp
This enables a calls to be dialled and terminated from the PC via Bluetooth, but it doesn't work the other way around. I have been looking into this for a few days now and it would appear many people are also looking for a solution.
The market potential for a fully functioning Bluetooth/PC link must be vast as it could be a solution for disabled users in making phone calls, used in call centres, in car PC's etc, etc

WM6 with MS stack, PC with Widcomm stack, auto answer problem

Hi,
Some background:
I'm currently working on a carputer project. Everything is working wonderfully and right now I'm going through the final phase of having my HTC Universal (WM6) phone use the car speakers and microphone as headset.
On my computer I am running on Widcomm BT ver 5. The Universal phone is running the MS stack. I managed to pair and connect successfully with my WM6 device. The headset works very nicely both ways, but with a problem:
Whenever a phone call comes in the phone automatically answers the call without even asking me. It rings once then answers. This does not happen while not using a BT headset nor does it happen with my regular portable Samsung BT headset. My universal is set to never receive calls automatically on all profiles. I'm assuming the problem is in the Widcomm driver but there doesn't seem to be anything I can change in the software settings.
Does anybody know how to solve this problem? I obviously don't want every single call that comes in to get answered. I wouldn't even mind answering the call from the phone itself (and not from the PC) as long as the voice gets routed from the phone to the car stereo with the external mic.
Thanks!
Yaniv

Categories

Resources