look at this picture
http://www.erikd.org/images/ppc/bad_skin.jpg
i have the same situation (top/bottom bar too small and "invisible" buttons)
how can i solve this problem....
It is because Expea is a VGA theme. By using a VGA hack you are fooling the device in to thinking it is a QVGA device and loading resources accordingly.
You will need to use a QVGA theme in order for it to display correctly.
The default Wizbar theme displays just fine.
does exists an expea2 wa2 qvga theme that replace the original expea2 vga?
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
??????
Great Idea. I like claunch because of its small siZe, but I don't use it because of the small Icons. Tried the prog and it doesn't work. Icons remain at 32 even after I resized them. I can tell they are larger because it only shows a portion of it. Is there a setting somewhere that I'm missing?
Got IT
OOPs figured it out. Works Great. Thanks
_craig said:
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
Click to expand...
Click to collapse
Hi craig,
good job. Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
cheers
kuifje
kuifje_xda-developers said:
Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
Click to expand...
Click to collapse
Don't know much about 12.03 and what changed with 12.04. However, with 12.04, from what I could tell by the code: it's best to use 16 and/or 32 px icons/bitmaps (or 48 if you're running cLaunch_48px) and show them at their native size. Otherwise, scaling/cropping will occur.
craig,
I am only using this for shortcuts to regular apps with their own built-in icons. I suppose they are 32*32.
When I set the icon size to 16*16, i see the icon in normal resolution but only the upper left quarter of it.
When I set the icon size to 32*32 I still see only a quarter, but now with pixel doubling, instead of the whole icon in normal resolution. When I set the icon size to 64*64 I see the entire icon, with pixel doubling, but distorted at the bottom.
Also, the upper left corner of the icons is shown in the setup screen, and of the settings and options dialog (and ONLY those), only the upper left corner is shown (this makes it impossible to configure the settings, but I can still do that through claunch 1203 which I have installed also.
can you see anything VGA-related in the code?
Kuifje
I have installed the CAB file but when I go to change the icon size to 48, the icons appears tiled on my today screen. The icons are 32*32 and tiled in the allowed 48 icon size. Do I need to make changes to additional settings??
Hi,
I have a freshly purchased Ipaq 214, and i use to use Claunch on my Asus620.
the Ipaq is VGA, and i have same behaviour you mention, ie can only see quater of the configuration menu... which does not really allow to tweak the interface, and finally makes it unusable!
not to be too particular, but 48 point is too large. can you hackup another version that accept 36-40 pixel? thank you so much if you could.
cLaunch Settings
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
vincej said:
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones...
Click to expand...
Click to collapse
I'm having the same problem and I'm pretty sure that it's the touch pro has the TFT 480 x 640 px and the Mogul was 240 x 320 px (Half) I don't know much but I'm sure thats the problem. I'm having this same issue with a few of my old apps (Skyfire, Music ID, Claunch) I'm bummed Can anyone offer a tweak or solution?
bump please make a vga version
Pls a VGA Version.
It don´t runs in my new HTC TOUCH HD
Many thanks,
Omnia qvga it does not work
It looks nice, but when I set the setting for icons to 48 icons are tiled. It does not show the full 48x48 icon when set to smaller size. I have not the tools to do it myself. Thanks for any help.
vincej said:
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
Click to expand...
Click to collapse
Hello
I'm new on this forum and would like to confirm exactly the same problems on my HTC Touch HD.
I've been using this software for years on my old MIO, but I must now move to another soft for my HTC.
Like other people in this thread, I really would like to come back to Claunch.
Any chance to get it upgraded ?
Many thanks for that wonderfull software.
I would like to have Claunch size 64
Hi,
I am very happy with Claunch size 48, but it would be better en size 64 : the friend of my mother had an AVC and he can't speak.
I put pics and shortcut to .mp3 : when he clic on one pic, the pocket PC read a little sentence.
He can use it in size 48, but it would be easier in size 64.
Many thanks for that wonderfull software.
Excuse my bad english, I am french....
Chantal
vga screen
it doesn't work with vga screen .. ie v900
it would be kind if it was possible to make it working for vga screen
many thanks
plus 1 on this if anyone can make a higher res icon version for wvga
would like to try this on the HD2 but icons are only a quater size with this version.
Can you get exe instead of today's plug in?
What i mean can we also jave claunch.exe which can be excuted from PPC as stand alon application instaed of today's plugin
Dear Friends,
Just installed SPB Mobile Shell 3. Its amazing software. Now when i use lifestyle mode the wallpaper (background picture) gets zoomed in and i can see just part of it. To view the entire picture i have to scroll the wallpaper with finger left to right or right to left. But not able to see the full wallpaper on the screen. I am using wallpaper size 640 X 480 resolution. Also tried different wallpapers but it automatically zooms the picture.
Now this doesn't make any sense as we cant see the full wallpaper.
Please help on how to make wallpaper to appear full on the lifestyle layout.
Regards,
Vishal
use wallpapers larger than 1024x768 res.
works for me.
michaelides said:
use wallpapers larger than 1024x768 res.
works for me.
Click to expand...
Click to collapse
Dude tried it too, but still it get zoomed. I am so fade up with this.
Please guys help me in this...
mobile shell wallpaper
Hi! Got the same problem, but was able to fix it. Just search for mobile shell wallpaper. they have some from spb site.
I have been creating a few VW style wallpapers for a while in 480 x 800 as jpeg's.
When I assign it as the today/lock screen it is not centralised. As when I press start the image moves up. If you understand? I'll try and get some screenshots.
I have an Image of a BBS alloy before and I'm sure that this didn't do the same. I was pretty sure the resolution was 480 x 800. Is this correct?
Hoping somebody that creates themes/wallpapers could help me out.
I'm using photoshop CS3.
Thanks,
Al.
A.Calamita said:
I have been creating a few VW style wallpapers for a while in 480 x 800 as jpeg's.
When I assign it as the today/lock screen it is not centralised. As when I press start the image moves up. If you understand? I'll try and get some screenshots.
I have an Image of a BBS alloy before and I'm sure that this didn't do the same. I was pretty sure the resolution was 480 x 800. Is this correct?
Hoping somebody that creates themes/wallpapers could help me out.
I'm using photoshop CS3.
Thanks,
Al.
Click to expand...
Click to collapse
I think the image you see when you go into the start menu, is the 'lock screen' wallpaper, so i think it displays this between the top and bottom bars... so if you're using CHT or another app to make your wallpapers fullscreen (i.e. cover the top and bottom bars) it'll look weird.
I had the same issue..... i think
yup 480*800 is correct...
Yeah, I was pretty sure on the resolution. But yes. It does cut out the top and bottom where the black bars are. Is there a way to stop it doing this?
What is CHT? I'm not using that to make them fullscreen I don't think.
Its just when I make the wallpapers because I crop most of the image and line it up with the bottom of the picture for a good "look" It most likley cuts it off on the today screen. Which cuts some of the detail out sometimes. So I have to make sure that it is far enough up the screen. I suppose I could get the resolution between the two bars. Although when you get the lock screen there would be two gaps.
Is there a way to have a different lock screen?
A reg key pointing to the image?
Thanks,
Al.
when i used to be a WM user, this is what i figured out about WM6.5(.x) behavior.
the HD2 has a 480x800 screen. WM6.5 can be set to have a wallpaper (***cough***iPhoneSux***cough). WM6.5 can also be set to have transparent "top" and "bottom" bars.
now, things start to get a little confusing.
1. ideally, we would like to see the ENTIRE wallpaper on the lockscreen and homescreen, with the status/notification icons overlaid.
2. similarly, we would like to see the ENTIRE wallpaper behind the start menu. if transparent "top" and "bottom" bars are used, we would like them to be transparent when the rest of the wallpaper is visible as just described in the scenarios.
3. however, we would like the transparency to go away when an application is running in the foreground (being able to see thin strips of the wallpaper when an application covers the rest of the screen looks silly i guess).
it turns out that WM6.5 ALMOST covers all those requirements. it sort of fails on the homescreen (where it matters most!). now, things get complicated on the homescreen also. there may be:
a. NO homescreen plugin OR...
b. the native "titanium" homescreen OR...
c. HTC's "sense" homescreen (also called touchflo, manila, etc)
now, simply using a 480x800 file yields the following results...
i think i remember that (a) fails, but most of us have SOME homescreen plugin. i think i remember that (c) also fails because "sense" seems to take over the responsibility to draw a wallpaper in its background.
i have been a loyal HTC "sense" user as long as i was using WM. i always had CHT installed as well (Cookie's Home Tab, a plugin to enhance HTC's "sense" homescreen by adding many more options). i believe CHT1.8.5 and later added a new style of wallpapers and the ability to skin" the "top" and "bottom" bars with corresponding strips of the wallpaper. this meant i could just feed it a 480x800 image and it would do the necessary clipping/cropping/skinning to achieve the effect of a seamless wallpaper, whether on the lockscreen or homescreen or when viewing the start menu. a side effect was that my "top" and "bottom" bars were always skinned, even with an application in the foreground, but such is life!
i hope that helps...