It's the Orange M600 variety and it's unlocked.
I fitted a brand new housing as the old one was a bit scratched and I've fitted a Motorola rear speaker as the original HTC one was hopeless.
Oh and I've included a desk cradle, Brodit passive car cradle, a 1GB SD card and a set of Seido headphones. None of the fit my Hermes.
If you're interested click the link in my sig. I'll remove it when sold.
Cheers,
Related
hey guys, just thought some of u would like to know. i just bought a universal windshield mount for my kaiser from best buy for $30.
http://www.bracketron.com/xmain/phw203.php
it works awesome and the nicest thing is the long arm, so u can have it close to u and not have to reach far
u can buy it here off the best buy website:
http://www.bestbuy.com/site/olspage...etron&lp=7&type=product&cp=1&id=1138084373352
good luck
omar
Custom windshield mount forTreo fits Tilt perfectly
The Igrip custom unit for the Treo fits perfectly. The universals are a problem as the "ears" tend to move apart, dropping the phone. Here's a link for their high-end unit for $29. They also make a custom unit with a gooseneck (actually a thick aluminum wire covered with a sleeve) for $19.
http://shop.treonauts.com/content/accessories/3-78--1781.htm
Kaiser Windscreen Mount
I've previously used the Artemis and now switched to the Kaiser.
The Artemis package comes with a car windscreen mount that has a holder fitting the Artemis to a T.
Came across this website that has a holder which could be replaced to fit the Kaiser to a T. URL as follows -> http://www.mobilefun.co.uk/product/14751.htm
However, it's only available in UK. Anyone knows if it's available in Singapore?
Does anyone know where I can buy a new plastic casing for the Cingular 8525? The phone works great, but the outside is chipped a bit and a little beat up. I would like to replace it if possible. Everything I find when looking it up just returns cases / holsters - I'm looking to replace the actual casing the phone is in.
Alternatively, are there any good, hard cases that are not bulky and protect the screen as well? I had a metal one for the 8125 that worked well (although a bit bulky), but this phone doesn't quite fit it.
I would like to know too. I have too many scratches now and would like to clean it up. I don't want to switch phones until that Blackstone comes out!!
Hey, i was searching for Hermes Housing few weeks ago!
First thing you have to look are the different Hermes Models
HERM100, HERM200 and HERM300
The 200 has got a unique design so these Housings are not compatible to the other ones, but the 100 and 300 are nearly the same, the exclusive difference is the Front-Key-Layout.
The Key Layout does no effect to the compatibility of Housings.
As far as i know the 8525 is a HERM100 but it does not have a front camera.So if you want to put a 8525 Housing on a normal HERM100/300 you will loose your front Camera.
But inverted if you put a Hermes 100/300 Housing on a 8525 it will fit and you will get an empty front camera hole.
So if you got an 8525 you're able to buy every Hermes 100/300 Housing!
Here is for example one:
http://cgi.ebay.com/BLACK-FULL-HOUS...39:1|66:3|65:12|240:1318&_trksid=p3911.c0.m14
But if the pictures are true, it will only fit on 8525, because missing front camera.So the description is wrong, it will not fit for example with MDA Vario 2 (HERM300)
and here's my favorite Housing Seller:
http://stores.ebay.com/ukhitechstore
There you're able to find a 8525 Housing:
http://cgi.ebay.com/SILVER-FULL-HOU...20336QQcmdZViewItemQQ_trksidZp1713.m153.l1262
But there is also a amzing Black Housing for Hermes 100/300, which i will buy as far as i get the money
http://cgi.ebay.com/BLACK-FULL-HOUS...20336QQcmdZViewItemQQ_trksidZp1713.m153.l1262
I hope i could help you!
i have bought a full housing as mine was scratched to hell, there easy to replace.
hi,
ive been looking araund to finde some nice car holder, but could not find. maybe somone has boght anything on ebay that fits god or sovhere else.
Here you can find a car holder
http://www.brodit.se/?main=searchbrodit.jsp&search=xperia
/Jorgen65
I use the cheap car kit from Wilkinson's in the UK which holds the phone really well, and I have a Motorola mini usb charger for in the car too.
Try the one from Clas Ohlson. Works really good as long as you dont need the keyboard.
BE CAREFUL!
The Brodit holder is Scratching the X1's chrome frame!!!
I've used only twice and already there are two little black spot on the both side. Not worth it!
Hmm I have the Brodit active holder in backorder..
Are there more people experiencing the scratching problem?
Is there a good alternative carholder?
I am just using the Nokia Universal Holder CR-39 with the Easy Mount HH-12 that mounts on my windscreen. Some people might not like it but it is a pretty good solution for me.
I bought it when I had the Nokia n95 phone (used it for 1 year already) but it holds many phone perfectly (imate JASJAM, n95 that I have tried)
The x1 is not exception too, and it shouldn't cause any scratch since there is some soft foam on the side of the "holder".
Only down side is it might be relatively expensive compared to other kit.
I don't like the windshield mounts.
The Brodit is perfect because it's mountable on your dashboard without scratching it. And you can use the keyboard while it's in the holder.
I'm afraid there isn't an alternative.. So I hope the Brodit scratching problem is a hoax (maybe the person using it wasn't very carefull?)
I'm getting mine from brodit on thursday. I really hope it doesn't scratch the chrome and that it was just that one holder that's defect.
I'll let you know if there are scratch tendensies..
I got my Brodit today and installed in my car.. and I can say it doesn't leave scratches on my phone.
Idon't se any scratches on my phone yet, and I've been quite brutal dragging the phone in and out of the holder alot. I would like to see how big the actual scratches are. Can vax6 post any pics of the damage?
Can you order directly from Brodit ?
I would second the choice of brodit.
the problem for me though, is that I change phone frequently, so it's not economical for me to get a new brodit holder every time I change phone , so what I did was get my old ipaq 6965 holder, and add padding to the side of it, and the thickness will vary depending on the phone I have, and I have a OEM looking holder w/o having to spend a bomb each time I change the phone. (although, I reckon not changing phone so often would be the solution)
Brodit holder
I haven't notoced any scratching on phone although I have thought that it is a tighter fit than brodit holders I have had for other phones. The other flaw is that the holder covers the speakerphone which is not the loudest in the world on the X1 anyway.
Its a bit worn on the casing and the metal piece on the front is gone but everything works great and comes with a 2GB card, power adapter and stylus.
I've posted it on EBay
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290277368034
Looks to swap out the banged up housing on my T9193. can someone confirm if the T8585 housing will fit and work? Not sure if the 3G radio requires different internals or different antenna tape within the housing. thanks in advance
I'm sure the back case will be same on the Telstra T9193 & T8585.
If yours measures 120.5mm in length & the audio jack protrudes in a moulded lump on back cover then should be fine. Just don't use a copy back housing from likes of eBay as quality & fit is simply awful, find a grade A used genuine housing.
Only the T-Mobile USA (TMOUS) HD2 rear housing is different & meassures 122mm in length & can be easily recognized as the audio jack is all smoothed in without raised moulding lump ...
ive bought an ebay T8585 housing before and it was great. not sure if it was a copy but it was marketed as genuine and fits nicely. my T8585 looks like new again. good to know the T8585 one fits the T9193! yes has the lump. thanks for the info!
You got a link to the eBay source of your known good housing as always handy for people to have option of buying from tested sources.
Hope the refurb goes well ...