Hi!
Will http://www.modaco.com/Paul-s-guide-to-changi-t256280.html this pagepool change work in WM06? Havnt had the time to try yet!
Cheers
MS
Yep, works fine. I have it running at 4mb right now, may try 6mb to see if it makes any difference.
I think I saw a link somewhere on this forum for a program that changes the pagepool almost instantaneously with only a single soft reset and no dumping of roms, but I'm not sure if it runs on the Herald, haven't tried it yet. Can't remember what thread I saw it in though.
steadi said:
Yep, works fine. I have it running at 4mb right now, may try 6mb to see if it makes any difference.
I think I saw a link somewhere on this forum for a program that changes the pagepool almost instantaneously with only a single soft reset and no dumping of roms, but I'm not sure if it runs on the Herald, haven't tried it yet. Can't remember what thread I saw it in though.
Click to expand...
Click to collapse
Last time i saw that proggie it wasnt for the herald.. Im fine with dumping the ROM anyway it jsut takes a lil moment thats it.
take the time to do it manually .. it's not hard.. and a good experience to learn
mrpeterparker said:
take the time to do it manually .. it's not hard.. and a good experience to learn
Click to expand...
Click to collapse
Already done it on wm5 mate =)
I am running the 6mb pagepool on my T-Mobile Wing, and it works great. You can definitely see the difference in performance, especially when overclocking with BatteryStatus.
duprade said:
I am running the 6mb pagepool on my T-Mobile Wing, and it works great. You can definitely see the difference in performance, especially when overclocking with BatteryStatus.
Click to expand...
Click to collapse
Ditto!!
It's easy. Just follow the instructions to the T. Don't use the little program he made, though, since some of our dumps don't match up exactly to his dumps.
I waited 'till I had the copy of the Official ROM to do it and I can safely say that I wish I had done it earlier. I was sweating bullets when I was doing it, but it's faster, smoother and I don't have to reset nearly as often. Now after a couple of day's usage, I STILL have more memory than I had when I first turned it on before. (Of course, I did a lot more optimizing as well.)
Hi,
im somewhat of a newbie when it comes to the wing and WM6. So far i've had the phone for just over 3 days and i already overclocked to 243MHz and 270MHz for boost if i ever need it with a minimum of 69MHz using BS. Ive also used the pagepool method and i did it to 4MB.
My problem is i dont understand EXACTLY what 4MB of pagepool is, and what the difference of 4MB and 6MB really is. But I do understand that it helps resolve the low memory issue. Can someone please explain me in details what the pagepool is and the difference between 4MB and 6MB, as in what are the risks and performance changes.
Oh and btw, in terms of Overclocking. Is it fine what i did? Thank you!
- Norman
nKiwan said:
Hi,
im somewhat of a newbie when it comes to the wing and WM6. So far i've had the phone for just over 3 days and i already overclocked to 243MHz and 270MHz for boost if i ever need it with a minimum of 69MHz using BS. Ive also used the pagepool method and i did it to 4MB.
My problem is i dont understand EXACTLY what 4MB of pagepool is, and what the difference of 4MB and 6MB really is. But I do understand that it helps resolve the low memory issue. Can someone please explain me in details what the pagepool is and the difference between 4MB and 6MB, as in what are the risks and performance changes.
Oh and btw, in terms of Overclocking. Is it fine what i did? Thank you!
- Norman
Click to expand...
Click to collapse
Hi nKiwan!
The pagepool on windows mobile devices is an area of RAM reserved for storing applications so that they can start quicker. In terms of throughput RAM is a lot faster than the built-in-storage. Thats why the OS tries to store as many applications in the pagepool automatically. So making the pagepool smaller makes some of your applications LOAD slower but they will work faster or you can have more apps RUNNING at the same time.
Basically either your apps load faster (bigger pagepool)or run faster (small pagepool).
I run my p4350 (wing) with 4mb at the moment but i think i might go for 6mb soon.
Hi all,
i've a HTC Herald (P4350) and after the execution of the 'pdocread -l' command the result is:
69.96M (0x45f6000) TrueFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
31.47M (0x1f78000) TrueFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
9.99M (0x9fd800) TRUEFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
1.89G (0x79280000) DSK1:
| 1.89G (0x79120e00) Part00
Which Part02 i've to modify?
Cheers!
Thats normal mate!
Did u notice all your part 2 are 0x3fd6000.. Just go ahead with 0x3fd6000 I got the same output from my herald/wing/p4350
Jovien said:
Hi all,
i've a HTC Herald (P4350) and after the execution of the 'pdocread -l' command the result is:
69.96M (0x45f6000) TrueFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
31.47M (0x1f78000) TrueFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
9.99M (0x9fd800) TRUEFFS
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
| 63.84M (0x3fd6000) Part02
1.89G (0x79280000) DSK1:
| 1.89G (0x79120e00) Part00
Which Part02 i've to modify?
Cheers!
Click to expand...
Click to collapse
u modify "0x3fd6000"
Related
Hi all,
I notice that nobody has made it possible to update the hw6915 to Windows Mobile 6.1. Is there any reason for this apart from a lack of people to do it?
If not I'd like to try doing it myself, since I know there is a lot of interest and have a lot of experience of messing with embedded firmware, for example on the Sony PSP.
Can anyone give me some pointers on how to begin? How do I dump the ROM currently on my device, for example? And how does one "merge" WM 6.1 into the ROM? Surely there is an OEM release of WM 6.1 that contains some common core which must be put into the cooked ROM.
Many thanks
EDIT: I have found a ROM dumper called grab_it. Is this suitable?
hw6915 upgrade to WM 6.1
Hello pal,
Yes, indeed, nobody has upgraded the hw6915 to WM 6.1 from what I am seeing on this forum, and this section especially.
I am really interested on upgrading my device but my knowledge on this kind of devices is just limited - although I am trying to "catch" the info's.
If you need some help - again, with my limited knowledge - please feel free to ask.
About grab_it, from what I had read on this section, there are many versions of that program so I don't know which is suitable for hw6915's ROM dump.
Regards.
FYI:the standard method to dump ROM is to use pdocread while connected activesync
Thanks for both replies. I have managed to make a dump using the 128mb version of grab_it but it is exactly 128mb... so I'm guessing there'll be a lot of 0x00 at the end of the file :/
I'm gonna try to use pdocread now..
OK, after having to hard reset my device (lol, the USB connect wouldn't work because all the scheduled tasks are corrupted), I have dumped the ROM using pdocread.
What is interesting is that the listing contained the following:
63.94M (0x3ff0000) TrueFFS
| 3.06M (0x30fc00) Part00
| 3.19M (0x330000) Part01
| 56.75M (0x38c0000) Part02
51.22M (0x3337e00) TRUEFFS
| 3.06M (0x30fc00) Part00
| 3.19M (0x330000) Part01
| 56.75M (0x38c0000) Part02
Click to expand...
Click to collapse
But after dumping the two devices, their contents were an exact MD5 match. The "51.22MB" label is also certainly wrong. However I have now obtained the 3 files part00, part01 and part02 in RAW format.
Could anyone recommend a tool for examining these files?
Hope to see 6.1 Rom.
I love the design of 6915. Very classic
Not possible
I have attempted this numerous times, there are many threads about this inlcuding the one I started with alot of information concerning this. Several of us on here have worked on this issue, the fact remains we need alot more help.
Any news??
love to test
hey i would to love to beta test it for you. i have a 6945 which is very similar to the 6915
Hmm.. still interested in this, but I haven't a clue where to start.
I want be a beta tester
Could someone running 6.5.3 (MR2 I believe) please do a dump for me? I would like a copy of part02.raw (IMGFS). You can follow the instructions here....
http://forum.xda-developers.com/showthread.php?t=334680
Thanks a bunch,
TrueG
rom dumb here
http://forum.xda-developers.com/showthread.php?t=585722
thank you for the link fire-warrior, but I'm actually looking for the Windows Mobile 6.5.3 update for the Xperia X2 which I believe is called MR2.
data from my x2:
442.75M (0x1bac0000) DSK1:
| 3.25M (0x340000) Part00
| 90.75M (0x5ac0000) Part01
| 128.00M (0x8000000) Part02
| 220.63M (0xdca0000) Part03
and i have dumped part02 as you want
http://www.multiupload.com/TGUQOLBZHX
but may i ask a question .... why do you need these files?
That's awesome, thank you so much.
From the sizes, I think I might actually need part03.raw. 220MB seems about the right size for an IMGFS.
-
There are not that many official releases of WM 6.5.3, mostly leaks and such. I would like to see the release for the X2 to see if there is anything I can use for my own ROM.
TrueG
fire-warrior said:
data from my x2:
442.75M (0x1bac0000) DSK1:
| 3.25M (0x340000) Part00
| 90.75M (0x5ac0000) Part01
| 128.00M (0x8000000) Part02
| 220.63M (0xdca0000) Part03
Click to expand...
Click to collapse
Hi fire-warrior, could I possibly bother you for a copy of Part03? It seems Part02 didn't have the IMGFS.
Thanks,
TrueG
Sorry for my bad english.
I have a question, I have this build on my "HD2 [6.FEB.11] [CWM] RAFDROID HD 3.0 | Fastest Full DesHD | DATA2EXT | [core: 7.1 Rafpigna OC]
Only I have the problem if I install a program, then I have a display freeze for 20 secound.
Do you have a clue on what to do it?
Thanks in advance
wvwb68 said:
Sorry for my bad english.
I have a question, I have this build on my "HD2 [6.FEB.11] [CWM] RAFDROID HD 3.0 | Fastest Full DesHD | DATA2EXT | [core: 7.1 Rafpigna OC]
Only I have the problem if I install a program, then I have a display freeze for 20 secound.
Do you have a clue on what to do it?
Thanks in advance
Click to expand...
Click to collapse
This is common with builds that store data on the SD card instead of on NAND.
I'm pretty sure you own a Kingston microsd, isn't it ?
what size, what class ?
Well I have a htc mini but put want to put a ROM in PTG. It is with this Rom
RUU_MINI_HD_MARYONE_23152_WWE_Clean_211210
But when I update it with DFT_SSPL_MINI of this error 294 invalid id sell.
See this post http://forum.xda-developers.com/showthread.php?t=780912
Regards,
See this post http://forum.xda-developers.com/showthread.php?t=780912
Regards,
__________________
| Repair Outlook PST 10.10.01 | MS SQL Server Remove (Delete, Replace) Text, Spaces & Characters From Fields Software 7.0 | Filmmanager 4.4.3 | G-Dictionary 9.0 | DVD Converter 1.1
Can firefoxOS run with Javascript (include ajex and JQuery),CSS or another Language?
Can it work like Browser?
Sorry for my bad english.
Firefox OS will use HTML5 as standard API.
If you want to read more, follow this link: https://www.mozilla.org/en-US/firefoxos/
There's no a native languaje of FirefoxOS to develop apps, but it doesn't means that runs everything. Let me show you a table:
App Made in | Runs native in the phone | With What works? | Works offline in the phone?
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HTML5 | Yes, hosted or not hosted | Javascript, CSS | Yes with appcache
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DJango | No, only hosted | If it's build as a webapp | Yes with appcache
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Ruby | No, only hosted | If it's build as a webapp | Yes with appcache
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Other | No, only hosted | If it's build as a webapp | Possible with appcache
-------------------------------------------------------------------------------------------------------------------------------------------------------------
So, you can make an App in Jquery Mobile, and it is going to runs good and as a native app in FirefoxOS, However you can run other Webappps make in other languages like Ruby, Django and others but not native, because it need dependencies in the phone and some software that FirefoxOS Developers are not going to add.