Any way to record a "macro" on WM6? - Advantage X7500, MDA Ameo General

Anyone knows how to make the shortcut on the desktop for the "wireless stereo" for the BT headset to turn it on and off in WM6?
Right now I have to:
1. Open Comm Manager
2. Click settings
3. Choose Bluetooth
4. Choose headset from the list (in my case S705)
5. Tick/untick Wireless Stereo
6. Tap Save
7. Close "Settings"
8. Close Comm Manager
Is there a software which allows to "record" this kind of seqence of taps and assign an icon on the desktop to it? (using Pocket Plus)
Yes, I have tested btIO -- and unfortunately it does everything except what I really want - You can not control the "wireless stereo" ON/Off with it. - Under WM6 on Athena the Audio2BT turns on voice recognition, Audio2Device does nothing. Options below work ok - audio GWCC_on, and Radio GWCC off.
I have reported this problem to the creator of this handy utility...
In the meantime - any way to record macros? - I prefer to have an icon on the desktop doing just one thing, not to choose from the list - it is difficult to use the list in the car when I want to turn it on quickly.

lukasz said:
Anyone knows how to make the shortcut on the desktop for the "wireless stereo" for the BT headset to turn it on and off in WM6?
Right now I have to:
1. Open Comm Manager
2. Click settings
3. Choose Bluetooth
4. Choose headset from the list (in my case S705)
5. Tick/untick Wireless Stereo
6. Tap Save
7. Close "Settings"
8. Close Comm Manager
Is there a software which allows to "record" this kind of seqence of taps and assign an icon on the desktop to it? (using Pocket Plus)
Yes, I have tested btIO -- and unfortunately it does everything except what I really want - You can not control the "wireless stereo" ON/Off with it. - Under WM6 on Athena the Audio2BT turns on voice recognition, Audio2Device does nothing. Options below work ok - audio GWCC_on, and Radio GWCC off.
I have reported this problem to the creator of this handy utility...
In the meantime - any way to record macros? - I prefer to have an icon on the desktop doing just one thing, not to choose from the list - it is difficult to use the list in the car when I want to turn it on quickly.
Click to expand...
Click to collapse
You can use BTIO (search forum) for easily turning BT on/off, doing BT audio, etc. Give you a little icon the your phone that you can manipulate BT services with.
You can use
http://vitotechnology.com/en/products/buttonmapper.html Vito Button mapper to record macro's...
"ButtonMapper also features macros recording to assign a sequence of stylus taps and perform them all at once with a single press of a hardware button."

Related

Remove or Hide Bluetooth

Hi, I'm going to be setting some of these phone up for business, and have decided that we don't want the users to have access to the bluetooth functionality. I would like a way of removing/Hiding bluetooth (or at least the icons for it) so the users cannot easily re-enable it.
Anyone know how this could be done?
Thanks
Hi,
Hope your customers wont visit this forum
Ok, open your registry editor and delete the following branches:
1. A 'BT hardware not found' message will be shown at each attempt to enable Bluetooth
DELETE:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth]
2. BT icon removal
DELETE:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
3. BT shortcuts (optional)
Add int-type (number) value "Hide" with "1" as its data value to
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
and create "HKLM\ControlPanel\MyCpl\Bluetooth Settings" key & add int-type value "Enable" with "0" as its data
Thanks for that SP, i've got some of it working: I've tried all three things you listed
I have removed the 'tray icon' from the front screen at the bottom, and also removed the icon from settings->connections.
However I still seem to have the 'Blue tooth headset mode' icon on the front screen and the Bluetooth Settings Icon in settings->system. Any ideas on how to remove these?
Thanks for any help
all items in settings are cpl files in the windows dir
see if you can delete the cpl file which is named something like bluetooth
about the today item then there is also a place in the reg's where they are handled as in which ones are display'd on the list you can check or uncheck
but why remove bluetooth ?
it's not like they cant just install it themselfs
unless you mess with the extented rom they will get their bluetooth back after next hardreset
education may be cheaper than trying to turn the bluetooth off.
Faking users...
Steee said:
However I still seem to have the 'Blue tooth headset mode' icon on the front screen and the Bluetooth Settings Icon in settings->system. Any ideas on how to remove these?
Click to expand...
Click to collapse
Try this utility. It does aforementioned PLUS disables headset mode on Today screen
To prevent BT enabling over hard-resets replace your original TPEnable.exe with this one. Don't forget to unlock your extended ROM first
ps: 'BT Settings' shortcut is a HTC-specific one and can't be removed easily
What danger do they pose by having Bluetooth? :roll:
BlueJacking?
if they are mobile,some may need it for headsets???
Thanks SP! that works really, well, and with BT disabled, I can live with the one icon left in system. I'm not going to alter the extended rom, as the only people who should be doing the hard resets are the tech support team.
Do you have the registry entries for removing the bluetooth headset item from the today screen?
Today removal
Steee said:
Do you have the registry entries for removing the bluetooth headset item from the today screen?
Click to expand...
Click to collapse
You're welcome!
Here it is:
[HKLM\SOFTWARE\Microsoft\Today\Items\Profile]
And leave this one:
[HKLM\ControlPanel\MyCpl\Bluetooth Settings:Enable] = 0
Maybe HTC will revise their code & fix the bug in the future, so the following will work then and will disable 'BT Settings'

[new release] VJPhoneToggle

For those worried about the phone app using too much memory in the background:
WM2003 and WM5 compatible.
This program is used to toggle the phone.
Useful if assigned to a hardware key or a shortcut.
If the phone is open, it will be closed. If it is closed, it will be opened.
Please note, for VGA WM5 users use my VJBigPhone app instead.
This application supports international language versions. By default it will look for the "Phone" window.
If your phone is called something different, launch the application with command line parameters matching the name of the Phone.
eg In German
\program files\vijay555\vjphonetoggle\vjphonetoggle.exe Telefon
After installation you will find a shortcuts in StartMenu > Programs > Vijay555 > VJPhoneToggle.
Check it out on my website!
EDIT: guys I think I made the cab wrong. try the exe for tonight
www.vijay555.com/vj/releases/vjphonetoggle/vjphonetoggle.exe
V
Any1 got a screenshot how this looks like on a Qtek 9100
q-biq, it literally just closes the phone app. Or launches it. Nothing to see!
V
I didn't really understood the goal for this tool.
Phone dialer opens easly pressing the TALK button, and closes also easly by tapping on "X" or pressing END button.
For sure this tool is supposed to do something I didn't catch.
However VJ, I'd like to propose you a challenge, for another "similar" toggling tool.
The porpose is: I have a SIM Twincard to use with the mobile phone fixed in my car.
Whenever I power on the car, it is supposed to switch off the mobile phone to avoid SIMs interference. This is simple for a regular phone, but not so practical for a Windows PDA Phone.
You have to:
- switch device on
- tap on 'Radio signal icon'
- tap on 'Turn on flight mode'
And when leaving the car, repeat all again to activate phone.
My idea was a small program to assing to an hard button, which would toggle the 'filght mode' or just GSM radio.
So you have to press just on buuton like switchi.ng the on/off
What do you think?
Conchas: this application was made for mzaslam, under this thread:
http://forum.xda-developers.com/viewtopic.php?t=34718&start=0&postdays=0&postorder=asc&highlight=
He is concerned that the phone app uses quite a lot of memory in the background, even when not in use. Pressing ok just puts it in the background. So VJPhoneToggle fully unloads the phone app when you're finished with it, and loads it again when required.
Re the Flight mode thing: I will have to make this app, but I use a dual sim myself and also use the flightmode off > flightmode on trick to switch sims.
I use PhoneAlarm on my setup. This can be set up to launch from a shortcut to switch profiles, so for my setup I use a today screen shortcut on claunch to switch to flight mode, work, home etc. So for my setup I have three thumb friendly icons to activate profiles on PA. So I can switch easily from Today. Is that ok?
V
Yes it works.
... but I always hae been looking for a small toggling application, assignable to an hard button.
Conchas: I don't understand. What do you want your hardware button to do? Load/unload an app?
V
I want my hW button to toggle 'fligth mode' on/off.
Or more exactly the phone radio on/off as the wireless manager does. More precise, as nowadays allmost every PDA phone device supports BT and WiFi.
i.e. I would like to enable/disable the SIM ability to register into the GSM/3G network, in order to avoid interference with a second SIM (twin card), whenver required (e.g. using into a car).
It is not just a matter of the last phone switched on, because when travelling by car, as you move to other network cells, the first phone switched on most likely will take the handover.
Guys, this has been updated to not require an international parameter on the command line.
It should internally support all international versions. I hope!
V
Conchas, is this what you are looking for? Just copy the exe to your device and bind it to a hardware button.
Great, Koksie
It works!
I'm using it manually.
Can you tell, where to put the '.exe', so it gets visible to assign on the "Settings > Buttons"?
I 've added it to '\Windows', but didn't get it visible.
Thanks
Fernando
You don't have to put it in windows. Just make shortcuts to it in the start menu. Any startmenu shortcuts get picked up by the Buttons cpl.
V
Hi,
Forget it.
I miss something. In fact it was possible to assign to the buttons, if copied the '.exe' to '\Windows.'
Great!
Thanks Koksie
Fernando

Is it possible!?!?

Hi all!
I'd like to configure the std button to open contact and/or calendar in order to do some action (create new sms for example!) or open some app. when press and hold... is it possible?
Any simple app that make just that?
Markino: can you explain further? You want to open a particular contact, but in what screen? Contacts or calendar?
Or you want to press the contacts/calendar button and use it to send an sms etc?
V
Sorry, for my terrible English...
I'd like to press and hold the calender or contact button and associate the "press and hold" to do somethink like "create new sms"...
P.S: I'd like a easy way to create new sms.
VJPhoneTools will do this. There is another way, but they're both just as difficult.
You could also use the app on this forum, SmartKey or something, to give you a "new" menu on the Today screen, to create new sms etc. Very very good app.
V
Hi,
yes it's possible. And much more: http://ae.inc.ru/aebplus.php
- Run Application
- Emulate keypress of Enter (Action), Esc and up/down/left/right keys
- Emulate standard application buttons
- "Virtual Application Button": Being specified as keypress action, "Virtual button" appears in standard Start -> Settings -> Buttons setup dialog and may be assigned here.
- Volume up/down
- Emulate Soft Keys
- Close (terminate) active application
- Switch next application
- Task Manager with charge level / memory summary info. Task manager may be operated with directional pad (up/down - choose application, left/action - switch to, right - terminate) or finger/stylus. You may apply filters to hide annoying applications (e.g. Phone)
- Ok/Close
- Start Menu
- Switch Display Off/On. Once you switch display OFF you may turn it back ON by the same keypress event or simply pressing Power On button.
- Switch BlueTooth Off/On
- Switch WiFi Off/On
- Vibration mode Off/On (WM5 only)
- Turn Off PDA
- Soft-Reset PDA (Soft Reset)
- Screen rotation
- Drop DialUp connections
- Disable "Power Off device if not used..."
- Switch to Today screen
- Clipboard operations: Select All / Copy / Cut / Paste
- Memory Monitor
- Battery Monitor/Uptime Forecast. It will show battery voltage/current/temperature if corresponding sensors are available
- Current Date/Time
- Pop-up menu with important AEBPlus actions. This feature is available in activated version only
- Any built-in action may be initiated by shortcut calling aebplus.exe with corresponding command line parameter
Markino said:
Hi all!
I'd like to configure the std button to open contact and/or calendar in order to do some action (create new sms for example!) or open some app. when press and hold... is it possible?
Any simple app that make just that?
Click to expand...
Click to collapse
Why not do it using voice activation i start my msgs excel and calender using voice activation

Wireless stereo shortcut on the desktop???

Anyone knows how to make the shortcut on the desktop for the "wireless stereo" for the BT headset to turn it on and off in WM6?
Right now I have to:
1. Open Comm Manager
2. Click settings
3. Choose Bluetooth
4. Choose headset from the list (in my case S705)
5. Tick/untick Wireless Stereo
6. Tap Save
7. Close "Settings"
8. Close Comm Manager
UFFF.
Any way to do it in one tap???? Toggle ON, OFF????
Here you have solution.Very nice and good working program remainding icon from WM2003:
http://www.silentservices.de/btIO-0.5.CAB
zobacz sobie linka po Polsku:
http://www.pdaclub.pl/view.php?news_id=12984
Unfortunately not...
I have tested this application and unfortunately it does everything except what I really want - You can not control the "wireless stereo" ON/Off with it. - Under WM6 on Athena the Audio2BT turns on voice recognition, Audio2Device does nothing.
Options below work ok - audio GWCC_on, and Radio GWCC off

HOWTO one finger bluetooth ON/OFF? (in icon)

The comm manager one step and then BT on two step
This is a too many time when i'd like to use the GPS
How to do one step this process? One click BT ON, or one click BT OFF
Please HELP
I too would like to know this...!
You can use quickmenu.
this replaces the start menu but has a handy bluetooth menu to quickly switch it on.
Google search cicleBT !!
Simple on/off.
I use VJVolubilis.
Download the cab here -
http://www.vijay555.com/index.php?Releases:VJVolubilis
Once installed you will have a folder under your programs that is called VJVolubilis or similar, if you go into the folder you will get to a few files/shortcuts - the one you want to run is called 'VJVolubilis BlueToggle', I renamed the shortcut to Bluetooth Toggle, moved it to the root of my programs and deleted all the other files and folder.
Then I used Buttons under settings to configure Button 3 with the shortcut I renamed to Bluetooth Toggle (or VJVolubilis BlueToggle if you haven't renamed).
Now I just hold the bottom button on the left everytime I want to turn bluetooth on and off. Really simple stuff.
Cheers
C

Categories

Resources