Can't make XDA recognise Micro Card - 8525, TyTN, MDA Vario II, JasJam General

Hi
I have read the thread about problems experienced by Media player not recognizing bigger SD cards. My problem is that my XDA doesn't recognise the card at all.
I know the card works (Sandisk 4GB) as I have tried it elsewhere.
The solution to the Windows Media problem was to delete a rogue file. Shall I delete this file or is it a hardware problem ?
Cheers

SDHC cards are only supported with Windows Mobile 6.
Could you be a bit more specific what version you have?

XDA did not recognise 4gb MicroCard
The WM6 one is a good obvious one.
Also I did not see what PC OS you are using.
If vista, the 1st time you sync the 4mb card in the phone, I had vista want to format the card. ..RUN AWAY !
If I ignore that, it is fine.
If you format the card it will likely not work (without another format, or worse)..

Storage Card
Thanks for the info on the card and WM6
I think that is it. I'll go and buy another card !
Cheers

Try to flash the Radio Rom. I know it sounds totally weird but I did that and suddenly it recognized the card.

Related

SD works on XDA not on PC? Why?

Hi all!
Quick (I hope) question.
I have a M1000 that I have been using with a Kingstone 128MB SD Card. I also have a PC with one of these multiple card reader built in (6-1 I think they call it).
When I put my Kingstone card in the PC 6-1 a window open automatically with the card content.
Now I have finally bought a 1GB SD card from Billionton (48x) on eBay.
When I put the Billionton in my PDA everything seems fine, I can see the card and record on it.
When I put the card in my PC it can't read it at best, if I try to turn it on with the card inserted windows get stuck before login... (I am using XP)
I can see the GB card only through ctive Sync.
What can be the reason for it? Updating the drivers on my 6-1 is not an option... I have already looked for them...
If the solution is "formt the card" can u suggest a SW that I can use from my PDA?
Thank you!
Chris
read here about some sdcard readers which dont support SD cards with surden fs's on them
http://forum.xda-developers.com/viewtopic.php?t=11064

How I fixed my 2GB miniSD problems

Today I received my 2GB Sandisk miniSD card from eCost (they sell it for real cheap so I thought I get one). I formatted it with XP (using its supplied SD placeholder) to FAT32. After I placed it on the PDA it reported the following crazy results:
2 GB storage
960 MB used
970 MBs free
In other words, my Wizard (running the latest AKU2 QTek ROM from ~March 22 2006) sees the full 2GB, but can only use 1 GB!!!
I then tried to format it with XP using FAT16, but the SAME problem occured.
Thankfully, I downloaded this utility: http://pocketgear.com/software_detail.asp?id=3191 and I did a "repair" (or format) the miniSD via the PocketPC. THIS utility saved the day! It fromatted the miniSD card correctly! And now I can see and use ALL of the card.
Please note that the problem/bug might not be with XP or the PPC. It might be with the actual SD placeholder, or even the flash reader (hardware bugs). The point is, that somewhere along the way something gets screwed during the formatting. So, if you buy a miniSD 2GB and you get such or other problems, download the StorageTools utility linked above to format (or use "repair") the miniSD card directly in the PocketPC instead of using XP and a SD-placeholder/flash-reader.
BTW, I also posted a review of the QTek 9100 yesterday: http://tuxtops.com/node/749
wow! I'm reading your post and thinking I wrote it! I had the EXACT same problem. I tried another utility (that made my miniSD card unrecognizable to my kjam).....a quick format with my pc, and I was back to only about 1gb of usable space....then i stumbled across storage tools. I ran the repair, and it was fixed! ahhhhh 2gb of space....woohoo!
Same problem, diffrent solution...
I also had the same problem, but found another solution, after trying to reformat, both in ppc and pc and cardreader in printer, card was unreadable by all devices. Therefore, as a last resort, I put the card in my digital camera (nikon s2) wich recogniced the card as unformatted and kindly asked if I would like to format it... after that it worked perfectly
help!!
i got the same problem with my 2G sd card..
i formatted with my PC and now it show only 975mb in my card!!!!!!!!!
i had try to use the StorageTools to repair it via my XDA mini s.. but it still show 975MB.... any idea???
After you used StorageTools to repair the miniSD card, you need to do a soft reset for the PocketPC to recognize the rest of the card.
However, I must tell you, the only clear deal is to FORMAT the card WITH StorageTools and NOT to simply just do a repair.
Hey I have this same problem, but the link to the program is no longer any good. Does anyone know what the name of the application was.
Thanks,
Bought new card
OK- Now I do not know what to do. I just went out and bought a new 2GB scan Disk MiniSD card. When I went to install my data on it, I can only get 1GB on the card. I need 2 GB. Does anyone have any ideas on how to fix this. I thought the last card was bad, but I guess not. This happens on 8125 and in Windows. Both see the card as 2 GB but will error out when you try to add more than 1 GB.
Please help.
Thanks,
The name is that one: storagetools...
I had the same problem and using just the evaluation version of the program was good enough to format mi sd and everything it's ok!
http://storagetools.softonic.com/pocketpc
what is a better format for MiniSD 1G (prob:read/writes slow)
I have a problem with my miniSD card reading and writing WAY too slow.
I think that may have happened when I formated the card as FAT32 partition instead of FAT. This thread seems like it is a helpfull answer, but which would read and write better? Does anyone know?
Thanx in advance.

SD Card not recognised in file explorer

Hi all,
I have searched hi and low for the resolution to my problem. I have owned a Magician (sold as Xda II Mini) for just under a year and have a 1Gb SD card (eagletec turbo 66x speed) which has worked beautifully until two days ago
File explorer does not recognise the SD card. I have tried the SD card in other devices (e.g. PC - using a card reader, digital camera, dvd player, my friend's pda etc...) and it works fine.
I have tried inserting different SD cards into the Magician and they all get recognised ok.
I have tried soft reset and hard reset to no avail.
I have formatted the SD card using a card reader on the PC (tried both FAT and FAT32) and also tried formatting it in my digital camera.
When I insert the card into the Magician (from power off state), the Magician does light up indicating to me that there is no problem with the spring load mechanism of the expansion slot. What is strange is that when I go to Settings->System->About, I get 'Expansion Slot: Not in use'
I also tried (after a suggestion in another post) to add a "shim" of plastic of paper on the contact side of the SD card. No use.
I am reluctant to flash the ROM as I have not had any other problems with the Magician to warrant it.
Any ideas?
Have you tried cleaning the contacts of the SD card? Try soft resetting with the SD card in it.
Hi thanks for replying.
Yes I have cleaned the contacts of the SD card and also tried many soft resets with the card in and also with the card out.
????
Hello,
Try formatting your card with a different reader or from a Nikia phone.
Regards
Carty..
I have tried formating the card in several card readers. Still not being recognised is file explorer. Again, the card does work in any other device I put it in - just not my mini
Anyhow, I'll just use a different card for now. Just wondered if any other people had the same issue as I do.
Thanks all.
for me the same **** happened with my new, exchanged, mdac. using the sd card with the previous machine was no problem, now the card is not being recognized at all. using it in notebook, camera ... no problem.
any ideas?
i dont want to start another thread but im having the exact same problem with my MDA Compact II. I have a 1gb Toshiba SD card that wont even work in the MDA but it works fine on my camera and PC. So I would like ot know if there is a solution to this
Thanks
Hi all
I am a newbie and am experiencing the same issue, external sd card not showing up in file explorer.
Sniffer can find it and I can play media files from there. Is this the norm or do I need to change something?
I am using C&C 1.5ghz Froyo Combo VERSION 8 final.
The 16GB card is seen by all other card readers I have tried.

4GB SDHC Wont Format

Well, I've been using my SDHC for a while. Been getting lots of memory corruptions, so I just place it in my card reader and reformat the card.
My card got corrupt again, so I thought I would upgrade to the latest ROM update, and would format the card and start again.
So I upgraded the ROM on my trinity, performed a format on my card and then stuck the card into the trinity after my ROM had been updated. Strange ... it wants to format the card, I clicked yes... then a few seconds later it reported an error (i didnt make not of it). I try reading the card from the trinitiy ... then from my PC and now I cant read the card at all.
I have tried on another PC (Windows XP on both).
I have tried WM5torage, I have tried Panason Format, I have tried Pocket Mechanic. Does anyone have any ideas? Its almost like the pocket PC cant see the card at all, and whatever the format did do to the car when it stopped, totally killed it off. Anyone with any ideas?
It's toast
Same thing happened to me.
jmermel said:
Same thing happened to me.
Click to expand...
Click to collapse
I had an issue like that with my SDHC card. I took it to the local electronics shop and formatted it in a new SDHC compatible digital camera. Now it works again . I don't thing that it is a good idea to format an SDHC card in your Trinity.

4GB Mini SD strange behaviour

HI all,
I am using a 4GB Mini SD, not SDHC ones, and it happens that my X7500 doesn't read it properly, I mean that it recognizes it but it reads it as full while it isn't so and I can't access to the folder and run applications installed on it either. To have a correct reading of the card, I have to remove and insert it from its slot.
What could it depend from? Any suggestion to solve the problem...considering I tried a format card from pc and ppc both?
THX so much for you help!
Any suggestion?

Categories

Resources