Does anyone know what the domain is for mail2web exchange server - trying to setup mobile push mail with mail2web cant seem to find what the domain is meant to be!
thanks in advance
I set up with mail2web push email and it works well. I don't think you need to put the domain information in (as it shown grey on my 8525 anyway). However, make sure you have your server address typed correctly as mobile.exchange.mail2web.com. btw, I set that up on Activesync under configure server, not sure that setting works in your situation tho
WM6 or WM5?
the user name settings are different for WM6 and WM5
Domain is still ad2 though...
Server is still mobile.exchange.mail2web.com
You can get your personal settings through the My Email Settings pane (>View ActiveSync Settings)
There is ( or was not checked ) an option to download your settings as a cab just add your password when prompted.
pen6uin said:
There is ( or was not checked ) an option to download your settings as a cab just add your password when prompted.
Click to expand...
Click to collapse
Yup, I used that cab too, it works perfectly. Much easier
Related
I just need everyone to re-send me all their information in THE BELOW FORMAT:
First Name:
Last Name or Initial:
E-Mail address requested: [email protected]ztek.com
Alias: [email protected]
Password:
For those of you from now on, I will require a $5 monthly donation to setup an account (this will be done through a subscription and paypal). I feel this is a fair amount for whoever wishes to donate. I will keep the old link for those that wish to donate above what I already ask for.
It will include an alias and Outlook anywhere access (use Outlook with this account). With each account you can have an alias setup so that your recipents see your email address as anything you like! Also, for an extra $5 per account I can automatically forward your pop3 or IMAP e-mail to your new exchange account.
Go to http://zteknology.com/paypal.html to make your donation. Make sure to use the subscription link.
The Outlook Web Address is now https://mail.getztek.com/owa/.
So if you like the service and feel that you can contribute, please send paypal payments to [email protected]. Anything helps, even if it is just $1.
If you do not know what Exchange 2010 is or offers, please google it before making any decisions about e-mailing me.
Also, please give me at least 24 hours to set up your accounts once I receive your information. Usually it will be far less than 24 hours. Thanks.
MOST IMPORTANT: do NOT e-mail me directly. All communications about Exchange 2010 must go through PM. If I receive an e-mail I will simply ignore it. This is done to simplify everything. When I have to spend extra time to figure out if you e-mailed me or PMed me, it just slows me down and e-mail's are easier to lose. Thanks for your cooperation.
Here's the setup info...I feel it's pretty thorough, but if anyone wants to add anything just let me know.
Setup on Outlook 2003/2007:
If you have an existing Outlook profile, follow steps 1-4..otherwise skip to the next section. These steps are for XP based machine. If you have Vista it will be similar but not exactly the same.
1. In Outlook, go to File --> Import and Export --> Export to a file --> Personal Folder File (.pst) --> click on the root folder in this window and choose “select subfolders” --> Click Next --> click browse and choose a location and file name for your .pst file. I suggest the desktop. --> Click Finish --> Click OK.
2. Let Outlook finish exporting your data. This make take anywhere from 1 minute to 30-45 minutes depending on how much data you have (e-mail’s, contacts, calendar).
3. On your XP Machine, go to Start, Control Panel.
a. Make sure your Control Panel is set to Classic View (Upper left hand corner of the window). If it says “switch to Category view” then you are good, but if it says “switch to classic view” then you should click it.
4. Double click on the Mail Icon within the Control Panel.
a. Click on “Show Profiles”
b. You should see your profiles here, most people will have one one and it will be called “Outlook.” THERE IS NO NEED TO REMOVE THIS!
c. Click “Add” --> Type in a Profile name (e.g. Exchange 2007/10) --> Then proceed to step 1 below.
-----
1. If using Outlook 2007/2010, At the prompt where you choose manual. If using 2003, ignore this part and proceed to the next step.
a. add a email account and choose Microsoft Exchange.
2. Microsoft Exchange Server: server.getztek.com or ztekserver.ztek.me if using Exchange 2010.
3. Username: Full Name given at Signup.
4. then hit More Settings
5. then click on Connection
6. then click on "Connect to Microsoft Exchange using HTTP" and then click on "Exchange Proxy Settings"
7. then type in mail.getztek.com for the URL or mail.ztek.me if using Exchange 2010.
8. make sure SSL is checked
9. click on fast and slow networks, and choose basic authentication
10. Click “OK” twice
11. Then click Check Name
12. And the username/password box will pop open
13. Type in GETZTEK/User or ZTEK/User if using Exchange 2010. (this user is your e-mail address. For Example: your email address is [email protected], this is johndoe)
14. Type in Password
15. Server Name and User Name should now be underlined.
16. Congratulations! You are finished!
Setup on your PPC Device:
----
1. Start -> Programs -> ActiveSync -> Menu Configure Server
a. Server address: mail.getztek.com
b. Tick on ssl connection
c. Username: name
d. Password: *******
e. Domain: getztek.com
f. Next -> Finish
g. Sync & Njoy
----
Setup on MS Entourage
1. Account name = [email protected]
2. Name = Your Name Given at signup
3. Email = your email
4. Accountid= your ID before @getztek.com
5. Domain = getztek.com
6. Password = ****
7. Exchange server = mail.getztek.com
8. Check that server requires ssl....
9. Uncheck everything under advanced.
10. It should now work!
Outlook Web Access URL:
https://mail.getztek.com/owa
POP3 Access Through Any POP3 compatible program/phone/device
Incoming and outgoing mail server: mail.getztek.com
username: if e-mail is [email protected] then "user" is the username.
Outgoing server requires Authentication
Incoming server requires SSL (Port 995)
IMAP Access Through Any IMAP compatible program/phone/device
Incoming and outgoing mail server: mail.getztek.com
username: if e-mail is [email protected] then "user" is the username.
Outgoing server requires Authentication
Incoming server requires SSL (Port 993)
Can I be the first to say thankyou to Denial for this service! Just re setting up all my stuff, but from what I've seen of the new OWA it looks really good!
Thanks!
EDIT: Can you please turn off enforcing security policies on mobile devices (eg PDA's). I don't want to need to have a password when I switch on my phone everytime.
Exchange all set up
I got exchange up and running smoothly. It seems to be working awesome... Will post more over the next few days as I use it!!! Thank you so much!
DragonStar said:
Can I be the first to say thankyou to Denial for this service! Just re setting up all my stuff, but from what I've seen of the new OWA it looks really good!
Thanks!
EDIT: Can you please turn off enforcing security policies on mobile devices (eg PDA's). I don't want to need to have a password when I switch on my phone everytime.
Click to expand...
Click to collapse
I turned off the security policy. Just soft-reset your device and then turn the lock off. Isn't the new OWA awesome!?!?
DeniaL said:
I turned off the security policy. Just soft-reset your device and then turn the lock off. Isn't the new OWA awesome!?!?
Click to expand...
Click to collapse
Thanks for that! No more fumbling around trying to remember what I put as a password. And yeah, the new OWA seems really good! I'm actually thinking about ditching Outlook later on and just using the web interface.
Exchange 2007 request
Too much information.
trapper probly a bit too much detail there for a public forum
Thanks for the post, I honnestly thought I'd sent that in a PM.
rjefferis said:
trapper probly a bit too much detail there for a public forum
Click to expand...
Click to collapse
Wayyyyy too much information. A mod would probably be prudent in deleting that post...
EDIT: Just beat me to fixing it.
thank you very much for the upgrade. i have pm you with my informations
sounds cool. what about uptime and service´s lifespan? i mean will the service be gone in a few months.. my exchange provider needs to be reliable, i dont want to loose all my emails and stuff.
DeniaL said:
I turned off the security policy. Just soft-reset your device and then turn the lock off. Isn't the new OWA awesome!?!?
Click to expand...
Click to collapse
It is awesome, thanks for turning off the security feature. Everything seems to be working great!
dutty said:
sounds cool. what about uptime and service´s lifespan? i mean will the service be gone in a few months.. my exchange provider needs to be reliable, i dont want to loose all my emails and stuff.
Click to expand...
Click to collapse
I plan on the service being around for a long time seeing as how I use it myself. At some point I might have to close registrations if I run out of accounts I can give out., but the service should keep on tickin'.
Trying to setup my mailbox again after the upgrade, but it seems the exchange server doesn't support connections using entourage 2004 (mac outlook) anymore?
DeniaL said:
I plan on the service being around for a long time seeing as how I use it myself. At some point I might have to close registrations if I run out of accounts I can give out., but the service should keep on tickin'.
Click to expand...
Click to collapse
i´m really tempted to sign up have you got somekind of email aggregation so i can fetch pop3 mails from other accounts?
This is a great service and is far better than the previous Exchange version I was using.
dutty said:
i´m really tempted to sign up have you got somekind of email aggregation so i can fetch pop3 mails from other accounts?
Click to expand...
Click to collapse
I just forward one of my pop3 e-mail accounts to my exchange account. I'm not sure if this is what you are asking. There is no way for the Exchange server to automatically download pop3 mails from, say gmail. You have to forward those e-mail's.
DeniaL said:
I just forward one of my pop3 e-mail accounts to my exchange account. I'm not sure if this is what you are asking. There is no way for the Exchange server to automatically download pop3 mails from, say gmail. You have to forward those e-mail's.
Click to expand...
Click to collapse
same thing i did. works like a charm!
DeniaL said:
I just forward one of my pop3 e-mail accounts to my exchange account. I'm not sure if this is what you are asking. There is no way for the Exchange server to automatically download pop3 mails from, say gmail. You have to forward those e-mail's.
Click to expand...
Click to collapse
Actually, there are third party connectors you can use, such as POPcon, to pull POP3 and IMAP email. Apparently you can also use Fetchmail to accomplish the same thing. I'm attempting to set that up right now for myself.
Hi guys,
Im having a frustrating time trying to get my outlook to send email. I can receive just fine.
Just a note, my computer sends/receives fine and i use the same settings on computer and phone. I never user activsync because ive never been able to get the linux version to work for me.
My server requires authentication however i get this error when i try to send: "The message(s) could not be sent. Check that you have network coverage
and that your account information is correct. Then try sending again."
If i uncheck the option for authentication, the email bounces as it should saying relay is not allowed.
Im using the same settings as my computer, but I just dont see whats wrong. Im a linux user and built my webserver so i feel like i should be able to figure this out which leads me to thing outlook sucks lol
Any suggestions to try?
James
In 'Edit Server Settings' where it has your User name, Password, and Domain how do you have that set up? when i first did mine i set it up with all three, but it didn't work, and what worked for me was setting the username to be [email protected] leaving the Domain field blank -- so that is something to look into, and if it is different maybe try setting it up the other way just putting your email as the username and the domain in the domain field.
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
996turbo said:
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
Click to expand...
Click to collapse
Ive never tried tethering.. Ive been using the built in wifi or the data service with no luck.. I think its a crippled outlook issue..
Does anyone have suggestions for a free mail client that uses IMAP? If only thunderbird could be used
jemmrich said:
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
Click to expand...
Click to collapse
sorry when you said you use outlook to send i assumed you were using an exchange server -- since you are using IMAP what i said is irrelevant.
When you are at the point where it asks for the outgoing SMTP server, there is a link to 'Advanced Server Settings' at the bottom of the screen. clicking on that will allow you to require SSL for incoming and outgoing -- that would be my only other guess.
but i do find it strange that your incoming and outgoing mail servers are the same and not IMAP.lwp.com and SMTP.lwp.com or something similar.
I already search the forum but I can't find a answer. When I setup my hotmail account it redirects me to the mobile site of hotmail using opera.
Before I flashed my HD I received my mail in touchflo the way I want it.
I already asked the rom cook but he is taking a break.
So anyone know how to fix this? I want my mail in touchflo and not using the browser.
Just open Messenger.
Fill in your username and password.
When asked, select the "sync e-mail".
This wil create all the needed settings, so your e-mail account is configured within touchflo
grtz,
Degake
You are the best, worked like a charm
thank you.
degake said:
Just open Messenger.
Fill in your username and password.
When asked, select the "sync e-mail".
This wil create all the needed settings, so your e-mail account is configured within touchflo
grtz,
Degake
Click to expand...
Click to collapse
I would like to have that too but I already assigned myself to msn and so I dont get that option anymore.
And I cant find it in the options menu of msn messenger
any one got an idea?
I also have a problem with hotmail. after entering my details in the touch flo tab,a new msn window appears briefly then just goes back to a No Account tab. Any ideas pls?
Hotmail and others
If I've understood you correctly do this...
When you enter your email address enter a fake one for eg. [email protected] to avoid the auto-setup. On next screen untick the "try to get email settings automatically from the internet". On next screen choose "internet email" and carry on adding the POP3 settings for your email provider. That worked for Hotmail and Yahoo and should work for anything as long as the provider is pop3 enabled.
But normal hotmail doesnt support pop3 right?
U have to buy a hotmail ID for it ?
no the hotmail recently announced they now support pop. settings are as follows:
Incoming: pop3.live.com
outgoing: smtp.live.com
Username: [email protected] (make sure you include @Hotmail.com)
outgoing server requires SSL security, so make sure you check that
good luck
omar
hotmail account profile missing
Hi,
i have created a hotmail e-mail account profile but i couldn't see on windows mobile 6.5 outlook software.
i can see it in registry but not gui.
How can i use hotmail or msn mail account?
please help
thanks
I have
G1
FW 1.5
MLIGN-HeroV3.0
I can't log into yahoo mail.
does it have something to do with a port? it's on port. 995.
And when I play music, it plays from the speaker that you hear from.
Not the one in the back.
Do you have Yahoo's paid service or just using the free version of yahoo mail? If you don't pay for the extra upgrade you can't get yahoo emails on your phone.
psychoace said:
Do you have Yahoo's paid service or just using the free version of yahoo mail? If you don't pay for the extra upgrade you can't get yahoo emails on your phone.
Click to expand...
Click to collapse
oh so i have to pay for it? where do I pay? I just use the e-mail feature on the G1 like Gmail.
Go to yahoo mail and they have a plus plan that allows pop3 access.
psychoace said:
Go to yahoo mail and they have a plus plan that allows pop3 access.
Click to expand...
Click to collapse
But I was able to log on before with my other firmware. this is super weird lol.
Wierd cause me and a lot of people have never been able to get yahoo mail on our phones through a normal email app on an android phone.
psychoace said:
Wierd cause me and a lot of people have never been able to get yahoo mail on our phones through a normal email app on an android phone.
Click to expand...
Click to collapse
Okay here is the procedure on how to get the free version of Yahoo mail WORKING on your G1.
Make Sure your WiFi Connection is turned OFF first, before you tell me this does not work.
Go to your Email icon > Press Menu > Add Account
Type in your full yahoo email address including @yahoo.com
Type in your password
Go to manual setup > Press IMAP account and change to these settings....
Incoming server settings
Imap server - imap.mail.yahoo.com
port - 143
security type - TLS (if available)
Press Next, It will check your incoming server settings, then it takes you to the Outgoing Server Settings
Outgoing Server Settings
SMTP Server- smtp.mobile.mail.yahoo.com
port - 25
security type - TLS (if available)
* check Require sign-in
Press Next, Verifying Out Going Settings, Press Next at Account options unless you need to change a setting.
Give your account a name (optional ) - i called my Yahoo Mail and click Done
Hope this works out for those that could not get this done.
Press1Now said:
Okay here is the procedure on how to get the free version of Yahoo mail WORKING on your G1.
Make Sure your WiFi Connection is turned OFF first, before you tell me this does not work.
Go to your Email icon > Press Menu > Add Account
Type in your full yahoo email address including @yahoo.com
Type in your password
Go to manual setup > Press IMAP account and change to these settings....
Incoming server settings
Imap server - imap.mail.yahoo.com
port - 143
security type - TLS (if available)
Press Next, It will check your incoming server settings, then it takes you to the Outgoing Server Settings
Outgoing Server Settings
SMTP Server- smtp.mobile.mail.yahoo.com
port - 25
security type - TLS (if available)
* check Require sign-in
Press Next, Verifying Out Going Settings, Press Next at Account options unless you need to change a setting.
Give your account a name (optional ) - i called my Yahoo Mail and click Done
Hope this works out for those that could not get this done.
Click to expand...
Click to collapse
i followed your instructions but when its checking incoming server settings i get "TLS required but not supported by server" msg.
Midnight scarab said:
i followed your instructions but when its checking incoming server settings i get "TLS required but not supported by server" msg.
Click to expand...
Click to collapse
Midnight scarab, The reason why you are getting this message is if you chose TLS (Always). I tested it with that setting and got the same message "TLS required but not supported by server". Try it again hope that helps.
Press1Now said:
Midnight scarab, The reason why you are getting this message is if you chose TLS (Always). I tested it with that setting and got the same message "TLS required but not supported by server". Try it again hope that helps.
Click to expand...
Click to collapse
told me invalid username or password like it always had. I logged onto the web version just incase to see if it was still good.
psychoace said:
told me invalid username or password like it always had. I logged onto the web version just incase to see if it was still good.
Click to expand...
Click to collapse
Psychoace, the only thing I know of that would cause the invalid username or password is having the wifi connection turned on. The initial setup needs to be done over a 3G connection. If that does not work let me know and I will try to help you out some more..
Thanks a TON! As always I searched all over but should have came to XDA in the first place
This may be old news but - if you're hesitant about activating your HD2 but still want to sync with windows live - you can use the hotmail-activesync server settings (m.hotmail.com) to access and sync your email(+push), contact and calendar.
Mate thats spot on. Just done that on my phone and it worked straightaway!
Many thanks for the suggestions, greatly appreciated
No problem. If you can live without the market place then this gives you the rest of the live services.
I'll activate once i know what MS decide to do, if anything.....
hmmm so how do i do this? will this sync word docos etc
rainsey said:
hmmm so how do i do this? will this sync word docos etc
Click to expand...
Click to collapse
Google (And XDA search) is your mightiest friend
http://forum.xda-developers.com/showthread.php?t=704025
KrewsialNL: Thanks for adding the link.
rainsey: No not word docs just your calendars, contacts and email (incl push). For documents you could just email them to your hotmail account on your pc? not quite syncing but it will get the file on your handset without too much fuss.
I have a sharepoint 2010 account except the server uses basic authentication and i can't use the url to list the docs i use. I can assess them via webpage list for my docs but this is annoying it would of been nice to have the list maintained on WP7 or have sync like wm6.x.
Hotmail and skydrive is not the sync that i want to use or trust
I went to "Advanced Setup" under "Add an Account" and tried the following settings:
email: [email protected]
server address: m.hotmail.com
SSL enabled
username: [email protected]
password: password
Domain: <blank>
It won't let me click sign in with a blank domain so I assume that you just put a couple of random letters in there.
Then it keeps saying that the account information is incorrect, I've checked it 3 timees to make sure. Any ideas?
Nearly.... when you first set the account up put a couple of random characters in the domain field so you can complete the set up (the button to finish is not available until something is entered for the domain).
Once you've completed the set-up try syncing. It will fail and say theres an error with the account settings. but.... you're then offered a chance to change your username and password or modify the the advance settings.
Now if you go into the advanced settings you can delete the entry for the domain so it is completely blank - except this this time the option to complete the settings can be selected.
That should work
Xperia20 said:
Nearly.... when you first set the account up put a couple of random characters in the domain field so you can complete the set up (the button to finish is not available until something is entered for the domain).
Once you've completed the set-up try syncing. It will fail and say theres an error with the account settings. but.... you're then offered a chance to change your username and password or modify the the advance settings.
Now if you go into the advanced settings you can delete the entry for the domain so it is completely blank - except this this time the option to complete the settings can be selected.
That should work
Click to expand...
Click to collapse
Thanks for that, I knew I must've missed something out!