Found these...enjoy!
I believe they are english only....
yep and they dont work with Hermes.
Doesn't work on Artemis.
Sorry
Sorry guys!
I only tried them on my wizard. I didn't make em and I can't remember where I got them either....oh well.
You did do a reset after installing them didn't you?
yup, these used to work on wm03 i had them on my magician
its work my HTC touch
Related
Does WM6 work on Qtek 9100 ?
I would like to test it but i don't want to kill my ppc lol...
read the WIZARD UPGRADING forum, there you will read all about WM6 and WIZARD, and its working, for me its working like the OS should... few minor bugs, but nothing i complain about for now..
cheers
ok thanks, where i can found it ?
http://forum.xda-developers.com/forumdisplay.php?f=248
second one is for upgrade ?
sorry im french, my english is a litlle bad. lol
i would like to upgrade it
is there a real rom oh WM6 ?
thedarkreaper said:
is there a real rom oh WM6 ?
Click to expand...
Click to collapse
You got the answer already!
Hi,
I have a Kaiser (T-Mobile MDA III) with a German keyboard (QWERTZ) layout.
The Kaiser
Since I'm Dutch I changed to ROM to English and changed the keyboard to German layout via Start - Programs - Utilities- Device Config - Advenced Config - Keyboard.
But still when I press the "z" key the "y" is displayed.
What can be done about this?
I'm running L26_WM6 (HTC Kaiser WWE version_3) Kaiser has SPL running.
Is it also possible to switch hardware german keyboard against english one? And if yes where can they be bought?
Thanx
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
klick
double post
well i have the same problem , my device is qwerty and i would like to have the keyboard in azerty
Any solutions für the Screenkeyboard?
shell said:
Any solutions für the Screenkeyboard?
Click to expand...
Click to collapse
TRy Resco Keyboard or PCM Keyboard.
all those available cabs or reg strings doesnt work anymore. I think this issue has been somehow introduced with a newer OS bulit. I do have the same problem with my wizard hardware keyboard....
regards
This is the solution for my German Kaiser running WM6.1 WWE
For this problem on Wizard. http://forum.xda-developers.com/showthread.php?t=290967
Works on my G3 and G4 with WM6 an WM6.1 WWE
MiZi666 said:
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
Click to expand...
Click to collapse
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Artishock said:
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Click to expand...
Click to collapse
you'll find a way out at http://forum.xda-developers.com/showthread.php?t=394857
(read the posts by khals)
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Artishock said:
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Click to expand...
Click to collapse
if so try to install the cab file below...
hopefully this can help you
I am desperately looking for a (working!) method to use another keyboard (like the good cootek touchpal keyboard) on my HTC P3600 (WM5). I tried the software IMSelector as well as SIPChange but it works only a few times!I reboot many times but I always keep the default keyboard...
Can someone help me?
Thanks in advance
I'm not sure about free software but I use SKTools and it get me the correct keyboard all the time.
I've got SKTools !
But how to use it?
Hi,
I have an identical problem with the TouchPad or TouchKeyboard installed on my P3600. I've found that removing some of the object on the Today screen help TouchPad to start. So today, i've only a few items (messaging and SBP Diary) on my Today screen.
I also wait a little bit before entering my pin code for the phone until i see touchpad started (it shows the keyboard for a few seconds).
Since then, i "don't" have so much problems.
Ced
Thanks for your help!
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
I already used it but I had the same problem as the touchpal keyboard
nicus said:
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
Click to expand...
Click to collapse
you say you have p3600 with wm6 !?
I've asked htc to know if there is an upgrade to wm6 and they said NO !
how can upgrade my p3600 to wm6?
I'm french, so i want if it's possible an upgrade in french ...
Thank's for your respons
Alternate SIPs not showing up is a well discussed problem in the Trinity forum, having just reinstalled everything on my own Trinity it seems that it is memory related, once the free RAM is below about half then alternate SIPs tend to be reluctant to work reliably.
Hi all Dude
Can you recommend me to use HTC keyboard? Since I start using WM6.5.3 I really need a new keyboard. I used to install some keyboard but after that my PPC hanged. I don't know which keyboard can work fine on my HTC WM6.5.3 ..
Thanks for your help
FingerKeyboard2.1
wway said:
FingerKeyboard2.1
Click to expand...
Click to collapse
Hi! I have the same problem on 6.5.3 ROM (evo2)! Fingerkeyboard2 not working to me!
Why? Problems with installation? Put in Regional settings - US.
From all free keyboards, FingerKeyboard the best and perfectly works with Evo2. IMHO.
Probably it is regional fail, becouse when i chenge reg settings in Latvian, Calculator stop working! Posibl U R right!
Yes ... It is done
Thanks so much for your information ...
Now I can get a good keyboard ...
But one more question outside the topic which related to HTC dial and HTC volumn controller. Do any of you have try with some cab file?
Thanks
You are welcome =)
Sorry. I dont use standart diallers. (I love PhoneEx) But i know problem with all opal/mega diallers - scrollbar. I think, nobody have yet 100% worked .cab
And what about volume control, I can advise this app => SetVolume 0.8.0 <= with Transparent Diamond Skin it looks pretty nice =)
wway said:
You are welcome =)
Sorry. I dont use standart diallers. (I love PhoneEx) But i know problem with all opal/mega diallers - scrollbar. I think, nobody have yet 100% worked .cab
And what about volume control, I can advise this app => SetVolume 0.8.0 <= with Transparent Diamond Skin it looks pretty nice =)
Click to expand...
Click to collapse
Actually a cab can be made of mega dialer with no scrollbar, but the real problem is its not compatible with the most of latest builds.
ksokmesa said:
Hi all Dude
Can you recommend me to use HTC keyboard? Since I start using WM6.5.3 I really need a new keyboard. I used to install some keyboard but after that my PPC hanged. I don't know which keyboard can work fine on my HTC WM6.5.3 ..
Thanks for your help
Click to expand...
Click to collapse
I installed the keyboard Spb Keyboard 4.1, it is running in my Touch Viva with Evolution 2, but I bought it in the Microsoft Official website, it is very good!!
Is there a real phonePAD for HTC WM6* ! i downloaded here a some and non of them is working properly! Is there any like in Amarul3s ROM ?
tebra2000 said:
Is there a real phonePAD for HTC WM6* ! i downloaded here a some and non of them is working properly! Is there any like in Amarul3s ROM ?
Click to expand...
Click to collapse
I've uploaded these 2 cabs I used to use, can't remember what the differences are between the 2, not even sure how they work on vga, but I used to use them on my old orbit with wm6.1 with no problem.