So people... Here's where i'm at...
I Boot into KITL and select the OK button on the left side. It comes up with "USB KITL" and shows up on the PC in Device Manager. But it just hangs there in KITL mode. If i softboot, it looses the setting.
If i select the PPT button while in KITL Mode, it selects "ETH KITL" and then boots into WM5 and does NOT show up on the PC.
I have also tried to install WM6 via SDcard with success, but still no USB connectivity. And the Cingular WM6 does not have KITL enabled.
Please let me know if anyone knows how to select "USB KITL" and save the setting...OR......Install WM6 via SDcard with KITL settings enabled, Otherwise my 8525 wont show up when connected.
My Problem lies in KITL!!!
~ThumB
Olipro is a likely person to speak to:
http://forum.xda-developers.com/showthread.php?t=300096
Although post 9 there may give you some doubts.
Mike
QUESTION
Does anyone know an image of WM6 for Hermes that has KITL enabled? Please let me know. I have tried cingular's new build, and Schap's 3.57a.
Otherwise, I have managed to sync via live to get my contacts back, but I'd really like to see what happens if I have a way to access KITL with WM6 involved to see if it will make my USB port functional again. So far, the only build that I know has KITL enabled is WM5 ATT build.
thanks in advance and thanks for showing me how great this community is. I've learned a lot over this past week.
~ThumB
Related
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
Hi,
i've installed the new ROM from udK. Also with his previous ROM i've used (r7) i had troubles with WiFi. It just wont enable.
Neither via commManager as via the settings menu. If i click the "Turn on Wireless LAN" option in the settings menu simply nothing happens.
Can anyone help me out with this? Where can I find some logfiles about this? I'm really stuck!
in the meanwhile i tried multiple rom's multiple radio rom's.. nothing works, is it broken???
rgds
Try doing it when youre not connected to PC via ActiveSync. Seems there is a conflict between ActiveSync and COM Manager/WiFi in the newest udK rom.
thx for you reply, but im not connected with usb or activesync.. I think its broken?
*bump* ;
someone any ideas on this, how to debug wifi or whatever?? or do I have to send it to HTC for repairs?
the 3 options for usb to pc pops up when hd is connected to PC.
But if I want to reconnect to mode e.g: disk driver mode, how could I achieve
this without plugout&plugin the usb cable? Thank you.
you can softreset your phone after changing mode
otherwise you can't as far as I know
Yes you can!
Start -> Settings -> Connections tab -> USB to PC
Select what you need and the device will switch to that mode without any resets or replugging of the cable.
usb2pc doesn't include the internet shareing as usb2pcpopup.
There should be InternetSharing program in your start menu (I have Dutty's 3.3 ROM, I don't remember whether this program is stock or not, but I think it is). If you're connected to pc as activesync / usb drive just launch InternetSharing and the phone will switch to modem automatically. Once you disconnect IS the phone will go back to the activesync / usb drive mode.
Don't be afraid to explore your device (and the manual ) - it looks like you don't know about a lot of its features.
I have just flashed back to the official ROM.
The usb2pc do have 3 options. But the cooked rom like Dutty's 3.3 ROM
have only 2 options without internet sharing.
I am aware that I could run share internect, but it is much better if things
can be controlled in under one control page.
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Nevermind...lol I fixed it. I manually put it in bootloader mode, and flashed athiene os v23409.
yeah and i dont think that the ics option will appear unless ur phone has been given it sim info
XGX5309 said:
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Click to expand...
Click to collapse
Is there a solution to set it back to Active Sync without Internet Sharing other than flashing a new ROM?
I do not get the USB2PC-Popup anymore and my USB2PC dialog (Settings->Connection->USB2PC) is somehow incomplete (Can't see the "Ask me first .."-Dialog).
Is there a registry hack or something? I'v been googling for hours and I'm pretty sick of it right now.
Appreciate any help, thank you guys.
// edit says:
Found a registry entry:
HKLM\Software\OEM\USBtoPC
my Values are:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Still nothing ...
//:edit 2
Yeah, well ... I flashed it.
Hi all,
I have an HTC Touch HD (1.56). It was tied to Orange Poland, but I have SIM unlocked it with a web service. Now I wanted to try some different ROM (my main language is italian, but english would be fine as well -> as of now I've only been able to partially set language to italian changing registry code, but most of WM6.1 is still in polish). I have tried the HSPLWrapper_Blackstone_156OliNex.exe with no success.
If I just plug the HTC to PC USB cable, ActiveSync wakes up and connects.
I can browse inside, move files, install apps.
When I start the wrapper this is what happens:
1) with advanced USB settings ON (on HTC) the tricolour screen does NOT appear and the wrapper says Connection Error [202]. ActiveSync is ON and ready. -> if I start SSPL-Manual-TouchHD on HTC, the tricolour screen appears, the USB text appears, and on both wrapper and HTC I can see the progress bar at 0%. After a minute or so, the wrapper says there was a problem and shows the recovery procedure (I was never locked on tricolour screen, I just had to remove battery and everything was back to normal). If I try again the wrapper while the tricolour/USB screen is still there, nothing happens, and I get connection error.
2) with advanced USB settings OFF (on HTC) the tricolour screen DOES appear automatically when I start the wrapper, but no matter how fast I am pressing YES on HTC, the USB connection gets killed and ActiveSync disappears.
I have tried 2 different USB cables on different ports (no hub), rebooted PC several times. I have read the 3 wiki pages (HTC_Blackstone_Flash) and the OliNex procedure. What can I do? Can somebody please help me?
EDIT: I am trying this from Windows XP Pro up to par with WinUpdate (.NET 3.5 and everything else is there)
Thanks
You can always try USPL.
But first make sure you follow this exactly:
http://forum.xda-developers.com/showthread.php?t=505377
Hope it helps
A thread already exists for flashing difficulties. Please post your query within this thread
Ta
Rick
Hi guys,
I'm probably being really daft and missing something really obvious but I've been going round in circles for about a week on this now without any success and starting to tear my hair out. Proficient enough at flashing ROMs [the joys of HD2 ] and been working in IT support and consultancy for 20 years so the PC side is OK too - have tried searching through the various threads on here along with Googling but can't seem to find anything conclusive regarding my situation and hope someone could point me in the right direction.
Orange M5000 - rebranded HTC Universal, obviously
Pressing Power + Lamp + Reset does not appear to take me into the bootloader - I don't get a screen saying 'SERIAL'
I get a screen offering the following options:
Boot Options:
Enable KITL
Clean Registry Hive
Format Storage
with the following at the bottom of the screen:
R 1.03.00
G 42.36.P8
D 1.30.90 WWE
Using the small curser keys and button below the screen I can select any of the above options and select YES or NO
Pressing the button changes to another screen with a white background and the following options:
Select KITL Transport:
USB KITL
SERIAL KITL
Ethernet KITL
Select KITL Mode:
Active
Passive
And I can get no further...
I realise that we're probably missing something really obvious and/or basic out but for the life of me I can't find the answer! Thanks in advance for any help anyone can provide.
Cheers,
David
DavidElders said:
Hi guys,
I'm probably being really daft and missing something really obvious but I've been going round in circles for about a week on this now without any success and starting to tear my hair out. Proficient enough at flashing ROMs [the joys of HD2 ] and been working in IT support and consultancy for 20 years so the PC side is OK too - have tried searching through the various threads on here along with Googling but can't seem to find anything conclusive regarding my situation and hope someone could point me in the right direction.
Orange M5000 - rebranded HTC Universal, obviously
Pressing Power + Lamp + Reset does not appear to take me into the bootloader - I don't get a screen saying 'SERIAL'
I get a screen offering the following options:
Boot Options:
Enable KITL
Clean Registry Hive
Format Storage
with the following at the bottom of the screen:
R 1.03.00
G 42.36.P8
D 1.30.90 WWE
Using the small curser keys and button below the screen I can select any of the above options and select YES or NO
Pressing the button changes to another screen with a white background and the following options:
Select KITL Transport:
USB KITL
SERIAL KITL
Ethernet KITL
Select KITL Mode:
Active
Passive
And I can get no further...
I realise that we're probably missing something really obvious and/or basic out but for the life of me I can't find the answer! Thanks in advance for any help anyone can provide.
Cheers,
David
Click to expand...
Click to collapse
You must hold Power + Lamp and then press reset...
if you first press reset and then Power + Lamp you have the option that you have describe ...
d-two said:
You must hold Power + Lamp and then press reset...
if you first press reset and then Power + Lamp you have the option that you have describe ...
Click to expand...
Click to collapse
Thanks for the prompt response! Had guessed that problem would be something basic we were missing
Now we've come across another!
We can get into the bootloader fine with it showing SERIAL and when we connect the cable it changes automatically to USB. But...
Trying to run MaUpgradeUt_noID always gives an Error 150 ROM Upgrade Error - tried running as Administrator - no change
Its interesting that the picture in the utility is not of a Universal - dunno if this is relevant?
If we try to use the ROMUpgradeUT that is in the ROM directly, we get an Error 101 Connection Error
Picture in this instance is of a Universal however - again, dunno how relevant this is?
We'll get there
DavidElders said:
Thanks for the prompt response! Had guessed that problem would be something basic we were missing
Now we've come across another!
We can get into the bootloader fine with it showing SERIAL and when we connect the cable it changes automatically to USB. But...
Trying to run MaUpgradeUt_noID always gives an Error 150 ROM Upgrade Error - tried running as Administrator - no change
Its interesting that the picture in the utility is not of a Universal - dunno if this is relevant?
If we try to use the ROMUpgradeUT that is in the ROM directly, we get an Error 101 Connection Error
Picture in this instance is of a Universal however - again, dunno how relevant this is?
We'll get there
Click to expand...
Click to collapse
Which OS do you use ? (XP/VISTA/WIN7 32/64Bit)
d-two said:
Which OS do you use ? (XP/VISTA/WIN7 32/64Bit)
Click to expand...
Click to collapse
64-bit Windows 8 Pro
Works fine for flashing my HD2 via the usual methods.
Guessing there's either something we're missing in terms of running some compatibility settings [although we've tried] or that it may be a driver issue. Drivers noted in the thread about flashing Uni from Vista won't install however...
D
DavidElders said:
64-bit Windows 8 Pro
Works fine for flashing my HD2 via the usual methods.
Guessing there's either something we're missing in terms of running some compatibility settings [although we've tried] or that it may be a driver issue. Drivers noted in the thread about flashing Uni from Vista won't install however...
D
Click to expand...
Click to collapse
here look in this pdf for 64 bit you need a special driver