please help my htc fell and now the screen when it boots it says looking for sd card then it goes into a blue red and green screen saying spl 1.08.0001 and ipl 1.08.0001 please i dont know what is going on please help im like sitting by the pc looking at forums to see wa i can find but nothing so far
And is there a card in the SD-slot? If so, when you remove it, it still does that?
yah it still does it somehow i soft reseted and it worked but it went back i think its a bootloader or something i keep resetting but it keeps going back to that screen is there maybw something wrong with the os? im goin to try flashing it and see what happens
kadmusx said:
please help my htc fell and now the screen when it boots it says looking for sd card then it goes into a blue red and green screen saying spl 1.08.0001 and ipl 1.08.0001 please i dont know what is going on please help im like sitting by the pc looking at forums to see wa i can find but nothing so far
Click to expand...
Click to collapse
Bonjour;
regade ici : ftp://210.136.175.150/romcode/RomCode/HERALD-C9/HTC_P4350_FRA_4.17.406.2_4.1.13.44_02.94.90_Ship.exe
ca marchera je te l'assure
Doorso
Related
ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.
never mind fixed itby goin into the bootloader
funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help
What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?
Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?
Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers
just change the usb port to another one and start rom it should pick it up
i still have problems updating my P3300 to touchflow...
i use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tryed without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
Thnx.....
No one any clue...still no progres here.. pls help
Hi,
while updating my ROM of HTC P3400, i have bricked it. Now when i press any button on the phone nothing happens. Only red and green light flashes once and nothing else happens. No bootloader mode (tri color). No battery charging indication nothing. Phone is compeletely dead. I have some ROM images and set of tools (mentioned on this site) available with me. Please help me recovering my cell phone. let me know some links etc or any other means of getting my cell phone back.
I am in need of desperate help.
thanks
Ashish
Dude read properly here. esp from step no.4
if u tried olip's method n ur mobile is not working.this indicates u hav new gene.proceed from step no.4 from here
i am not able to come in Boot loader mode as well. When i press cmaera key with power on key...nothing happens. Battery is also not out. i have tried my phone's battery successfully in frn'z cell.
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Thanks a ton man...
i have flashed new rom and it works absolutely fine.
htc gene bricked
guys I have the same problem. My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. I am even not getting the tri color screen.please help me.
Not bootloader mode
i pressed camera button+power buttton but nothing happen
plz help me what i do????//
how can i get now booltloader mode
I have the same problem when i enter to bootloader the usb appears on the bottom of screen but i can"t execute the ""mitty.exe""".there is no usb button...
I also stop the webcomm.exe from task manager ;;;; pls hellp meeeeeeeeeee,,,,,
pressed camera button+power buttton but nothing happen
Click to expand...
Click to collapse
Hold the camera button and press the reset button. Read what ramersonw has said.
I also stop the webcomm.exe from task manager
Click to expand...
Click to collapse
Right click on the Activesync icon and deactivate USB Connection. Wait for the device to be recognized, if it is not being recoginized, change the cable.
ALso BRICKED
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
You can install any ROM you feel like, the choice is yours - just make sure that it says that it is for "New Gene"
PPL, I've tried all of it.. hold the camera key and reset/power on etc but my p3400 denies to boot. only answer n disconnect key blinks while trying to reset.
while trying to press the power on key nothing happens,,, no led blinks at all....
pls help...
ramersonw said:
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Click to expand...
Click to collapse
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
my HTC still well not run
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.10.Olip
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
[email protected] said:
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
Click to expand...
Click to collapse
The same
my HTC still well not run
I have tri colours
ONBL 1.07.0000
SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help
Thanks
HCT p3400i is dead pls help
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
jamshed said:
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
Click to expand...
Click to collapse
try to flash rom your device ! here tutorial to do it --> http://forum.xda-developers.com/showthread.php?t=472169
i have
ipl 1.08.0001
spl 1.08.0001
my phone does not satrt up exept in bootloader
i cant install any rom and my screen become white with 0% and it stail 0%
i don't kno what to do so plz help
daywalker_7780 said:
i have
ipl 1.08.0001
spl 1.08.0001
my phone does not satrt up exept in bootloader
i cant install any rom and my screen become white with 0% and it stail 0%
i don't kno what to do so plz help
Click to expand...
Click to collapse
I hear funeral prices are pretty cheap for phones now a days...
apreichner said:
I hear funeral prices are pretty cheap for phones now a days...
Click to expand...
Click to collapse
I hear the Touch Pro 2 was just released today.
isn't there any one to help me???????????????
daywalker_7780 said:
isn't there any one to help me???????????????
Click to expand...
Click to collapse
It's because you tried to flash with a SPL and IPL lower than 4, I believe.
I'm quite sure you just can't flash ROM's! lol.
Hard reset your phone: Hold down the two soft-keys, and while holding them, press and release the Soft Reset button. That should bring up a black screen. Press the phone button. You should be back to your default ROM. SHOULD be.
Ivanmmj would know more about this though.
i tried to hard reset but it can't do the format,there is an error
I'm not sure but I think you may have bricked your phone. I'll say it now. You should have done your research. There may be one more thing you can do. Hold down the camera button and press the soft reset button. Don't let go he camera button till you see the multi colored screen. connect your usb and run the current official T-Mobile ROM. If your lucky enough, your wing will be restored to a new factory default version. Let me know if it works.
thx DestructDez1
i tried to instal that rom (t-mobile) but nothing happen it just hang at 0% with an error (error 300)
any help plz?
Sorry, I think thats an unrepairable hardware problem.
can the goldcard help me?or there is no hope
daywalker_7780 said:
can the goldcard help me?or there is no hope
Click to expand...
Click to collapse
I don't know much about the gold card. But at this point there really is no reason why you shouldn't try it.
hay every one who had my problem
i found the solution and my p4350 was alife again
plz just follow this link step by step and it will be good at the end
http://forum.xda-developers.com/showthread.php?t=417930
c u later guys
PLZ Help ME PlZ my phone goes to the BOOTLOADER and nothing else happens i cant flash a ROM neither i can use my phn if i press the power button my phn doesnt power on i have to kep the camera button pressed and then press the reset button so i get the boot loader screen if i try the hard reset i.e press the reset button while holding the calling key/END ket its goes to the "smart mobility" screen and nothin happens . . .i have IPL 3.14.0002 and SPL 3.14.cmon on the bootloader screen and USB on the left bottom corner. ..guys plz help Plzzzzzz. . ..while i try to flash a new rom i get a "ERROR 322". .. .. .can u plz help
i also tried diffrent diffrent USPL but it doesnt work even flashing ROM anything i try to do it goes to 2% and i get an Error and the phone goes off
Guys please help me guys i am really in need and would really appreciate your help
i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive
akash.s said:
i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive
Click to expand...
Click to collapse
hi,
can u explain abit when and how it happened//What about the battery status?about ur IPL,SPL ??
battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me
akash.s said:
battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me
Click to expand...
Click to collapse
hi but u have mentioned SPL 3.14 in ur earlier post??.2.28.00 means ur phone may be locked.and u cannot flash other custom Roms,check this link u may get help http://forum.xda-developers.com/showthread.php?t=406721
battery condition means wheather the battery is charged more than 50% ??
bye
try installin hard spl 3.10 and after that install onyx rom.
Your problem may be solved