Hello All,
I can confirm this plugin works on WM5 (currently only verified on HTC Apache). Both the 3 and 6 tab versions are working.
3 Tab Version:
ftp://ppcgeeks:[email protected]/Apache/Misc%20Apps/htchomewm5.rar
Simple Instructions:
1. Install HTC Home Plug Today Plugin.cab to device, not storage card.
2. Install SDK Test Certs.cab to device.
3. Copy contents of PPC Phone folder to \Windows and replace existing files.
4. Reboot
If you want to use US cities, copy HH_0409_WeatherCities.xml to \Windows directory!
Enjoy!
_____________6 Tab Version_________________
This now works with the reg entry to allow you to select the order and number of tabs. The cab should set the reg for you, but you can change it to your liking. The reg entry is...
Code:
HKLM\Software\HTC\HTCHome
Tabsetting=1,2,3,4,5,6
Unfortunately, the same install procedure is still necessary. Install cab and then copy the 4 files to \Windows. Make sure the Home plugin is deactivated when you do this or when you change the reg.
thanks to colonel and helmi @ ppcgeeks for 6 tab!
ftp://ppcgeeks:[email protected]/Apache/Users/Colonels/WM5HTCHome6Tab.rar
Inside the .rar is a cab and 4 files. Make sure you disable any HTCHome today plugin that may be running. Then install the cab. After the cab installs, it will ask you to reset. Cancel that and copy the 4 files to \Windows. Then reset.
5 tab version screen shot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
quoting sp3dev:
(http://forum.xda-developers.com/showthread.php?t=313870
edit pe header - set subsystem minor to 1 in htchome.dll and htchome.dll.0409.mui. if you use ppc,not phone - delete import from phone.dll
don't forget to resign
or go to 4pda.ru\asusmobile.ru and find the patched plugin there
_____________________________________
Is anyone familiar with how to do this, or do it to a newer verion of the HTC Home plugin, either the 5 or 6 tab version?
Any help would be awesome in improving this!
5/6 tabs version from Kaiser?
How about 5/6 tabs version from Kaiser as available here:
http://forum.xda-developers.com/showthread.php?t=316107
The 3 tabs version available here:
http://www.pxdxa.com/read.php?tid=44369
Here is my GSmart i120 running WM5 AKU 3.3 and Wisbar Advance 3 beta 5!
TQ
The 3 tab version work well on my XDA IIs with xPlode Rom R5!
Works also 5 tab version?
Works great on Blue Angel!
Would love to have the 5 tab version working!
I know.. the 5 tab version working would be amazing! They are working on it over at PPCgeeks.. hoping maybe someone from here can assist in the process. The install for the 3 tab HTC home in this package is no different from other 3 tabs; what makes it work is the modified dll's in the folder in the zipped file.
As sp3dev said earlier in the other thread, they modified the htchome.dll and htchome.dll.0409.mui files. If someone can do this to match the change they made into the 5 or 6 tab version, it should work. Programmers? Anyone?
Hi, Does somebody knows why it didn't worked with my hw6945? I installed all as described but I only get an empty big square in my screen... the name of the plugin even appears on my today congifuration but I cannot make it work...
I cant figure out what files i am supposed to copy to the windows folder...Can anyone answer that question. I searched several websites but couldn't find an answer...Thank You.
Disregard the previous question. I finally found the files here...
Please help me with this, I really want to have it functioning with my Sable... please, anyone?
If you follow the instructions above and it will work. the three files that need to be copied to windows directory are htchome.dll, htchome.dll.0409.mui, and HH_0409_WeatherCities.xml. You can get these at
ftp://ppcgeeks.com/Apache/New Core OEMs/kdoweb/
The username is ppcgeeks and the password is ezupload. Its the top file. Extract the three files from that download. Follow the original instructions and overwrite those files, good idea to make backups before overwriting, and it will work. Hope this helps.
We have gotten the 6 tab version to work. However there are some strange issues with it. As you will see in the following files, the cab installs the .png files to \HTCHome instead of \Windows. This is necessary for this type of install. But, if you create an OEM for kitchen cooking, all the files can be run from \Windows. Also, we have tried to add the 4 files in the following package to the actual cab, but the cab will never install. During install, the progress completes or almost completes and then there is a message that the install was unsuccessful.
So, here is something that should work. Inside the .rar is a cab and 4 files. Make sure you disable any HTCHome today plugin that may be running. Then install the cab. After the cab installs, it will ask you to reset. Cancel that and copy the 4 files to \Windows. Then reset.
ftp://ppcgeeks:[email protected]/Apache/Users/Colonels/WM5HTCHome6Tab.rar
Hi Colonel
After I install this one (6 tab), there is not any HTC Home Today shown in my Atom.
What I have done is disable HTC 3 tabs and uninstall it.
Then, install the 6 tabs.
Copy 4 files to replace in \windows
soft reset
Perhaps try to copy all of the .png files that are in \HTCHome to \Windows so you have two copies. Like I said, this is still very raw and has some strange issues with it. Basically you might have to play around with the files. But, the 4 dlls/muis need to be in \Windows.
colonel00 said:
Perhaps try to copy all of the .png files that are in \HTCHome to \Windows so you have two copies. Like I said, this is still very raw and has some strange issues with it. Basically you might have to play around with the files. But, the 4 dlls/muis need to be in \Windows.
Click to expand...
Click to collapse
Still not work.
It is not show even "HTC Home" today plugin in the today setting to be selected.
colonel00 said:
We have gotten the 6 tab version to work. However there are some strange issues with it. As you will see in the following files, the cab installs the .png files to \HTCHome instead of \Windows. This is necessary for this type of install. But, if you create an OEM for kitchen cooking, all the files can be run from \Windows. Also, we have tried to add the 4 files in the following package to the actual cab, but the cab will never install. During install, the progress completes or almost completes and then there is a message that the install was unsuccessful.
So, here is something that should work. Inside the .rar is a cab and 4 files. Make sure you disable any HTCHome today plugin that may be running. Then install the cab. After the cab installs, it will ask you to reset. Cancel that and copy the 4 files to \Windows. Then reset.
ftp://ppcgeeks:[email protected]/Apache/Users/Colonels/WM5HTCHome6Tab.rar
Click to expand...
Click to collapse
Following this worked for me on AKU 3.5 WM5 Helmi rom. Thanks!
I need to get the audio player though... i saw a cab for it... i'll have to try that.
-Taylor
baszu said:
Still not work.
It is not show even "HTC Home" today plugin in the today setting to be selected.
Click to expand...
Click to collapse
Mine not work also.
ASUS P525 AKU 3.5.2
No today plugin appears in Today Settings but can find it in HKLM/SOFTWARE/Microsoft/Today/Items.
superevilllama said:
Hello All,
I can confirm this plugin works on WM5. I am using Helmi's 3.5 kitchen 1.02 rom off ppcgeeks.
Link to ppcgeeks thread for HTC HOME:
ppcgeeks(dot)com/htc-home-3-button-and-clock-working-on-wm-5-t7143.html
Simple Instructions:
1. Install HTC Home Plug Today Plugin.cab to device, not storage card.
2. Install SDK Test Certs.cab to device.
3. Copy contents of PPC Phone folder to \Windows and replace existing files.
4. Reboot
If you want to use US cities, copy HH_0409_WeatherCities.xml to \Windows directory!
I am bringing this to you all in hopes that perhaps someone can expand on this and add the other tabs such as photo dial and music. Let me know what you think! I can also upload this file to the xda ftp later today.
Click to expand...
Click to collapse
Hi there,
works great, thanks! I am unable to receive any updates through on the weather on gprs, not a problem on wifi though - I have heard that is a t - mo issue via a proxy server do you know of any workaround?
Thanks
"No today plugin appears in Today Settings but can find it in HKLM/SOFTWARE/Microsoft/Today/Items.
"
if there are too many today items wm just dont display them all
a workaround is removing some in the regs
Rudegar said:
"No today plugin appears in Today Settings but can find it in HKLM/SOFTWARE/Microsoft/Today/Items.
"
if there are too many today items wm just dont display them all
a workaround is removing some in the regs
Click to expand...
Click to collapse
I delete all plugin registries except Owner info.
Uncheck all
So no plugin at my today screen.
Reinstall
The result is same.
But I can install 3 tabs version and it works great.
Any idea???
Thanks.
vivi
Related
Just published yesterday, another program MSCEInf (http://www.codeppc.com/telechargements/msceinf/msceinf.htm)
is a Cab Analyser which show you all the things done if you install a CAB on your PocketPC : Files, Registry settings, shortcuts...
It lets you extract all files with original names and build the inf file as it was build before compiled to CAB.
So you can make changes, if you need it, and rebuild the CAB with the program of Microsoft CABWIZ (installed by Microsoft Theme Generator).
It works with all Cabs (also with TSK which are Cabs with extension changed).
It is still in french! but easy to understand. If you find that it is helpful, i can translate it in "loosely" english !
Like ThemeGenCE, it accepts "Open With" command and Drag and Drop on the window (drag and drop a cab on the opened window).
Friendly, Benoît
Thanks benoit - an english version would be nice - my french is not that good :wink:
English version has been sent to the webmaster of CodePPC 5 minutes ago.
Maybe on line today... or in two months...
Friendly, BenThon
MSCEInf in English
Now available in English !
http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip
Friendly, BenThon
Merci bien Benoit pour MSCEInf.
It's a great one.
thx
Re: MSCEInf in English
BenThon said:
Now available in English !
http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip
Friendly, BenThon
Click to expand...
Click to collapse
thanks benoit!
Nice app. Very well done.
tip: can you make clicking the column header sorting that column?
Cheers
Yes, it is possible. But I have just sent to the webmaster of CodePPC a version 1.3.8 with "cosmetic" improvements.
Maybe for the next one ...
Friendly, Benoît
Nice app. Very well done.
tip: can you make clicking the column header sorting that column?
Click to expand...
Click to collapse
In which pages do you think it will be useful ?
Thanks
Sorry for the late reply.
I also use your app when checking what is installed. Sometimes the deinstallation of apps is not perfect on ppc.
So sorting on items that I want to remove (files/dirs and registry hives)
would be very useful.
But is sorting when clicking the column header not default? I assume not.
Is it possible to make it extract only selected files from the cab?
Thanks
Sort Tabs
I have just implemented the alpha sort for each columns in each tabs.
I will put in the next version. Thanks for the suggestion !
I can send you this version if you give me a mail.
Friendly, Benoît
New Version of MSCEInf (1.3.9)
New Version of MSCEInf (1.3.9)
Improvements :
1) Alphabetic sort on each column in each tab.
2) New button for choosing files to extract :
Either check the checkboxes for selecting files to extract.
Or Drag and Drop files to the right column of selected files and also the ability to unselect file by Drag and Drop from the column of selected files to the recycled bin.
3) Links, About box...
4) Cosmetics...
MSCEInf Webpage
Thanks benoit - i find myself using this program more and more!
Look forward to future updates :wink:
Thanks.
If you are planning more opstions ;O)
- extract using the full path name (directory structure)
- drag & drop from the Files tab directly (with posibbility to do a selection
with the more (click, ctrl+click etc)
Got an error once reusing the already started program when dropping a cab onto it. It wasn't the cab. Retried it but could not reproduce it.
The error was in french while I use he english version.
Again great prgram. I use it nearly every day now.
Cheers
Nice App,
A super feature would be if you can double Click a file and open it with its associated application or as second option notepad (or favorite editor). so you can have a look inside with extracting all first.
Maybe even save it back afer modifictions or a feature to replace an existing file.
@BenThon
Nice tool, great work!
In the right direction to become a full alternative to 'WinCE CAB Manager', for which author claims 149US$ :evil:
If we could delete/ insert new entries/files directly in your tool and rebuilt the CAB, it would be superb ;-)
Suugestions for MSCEInf
Thanks for your encouragements !
My comments :
1) Extract files with full path name : not difficult to do (maybe later).
2) Drag and Drop from Files Tab : not difficult to do (maybe later).
3) Double click and open files with
- associated application
- Notepad
not difficult to do (maybe later).
4) Delete/Insert new entries and rebuild the cab : more laborious to do. But you can use the rebuild INF file after editing and Cabwiz to rebuild the cab. It is not difficult to do.
Next version of MSCEInf (1.4) is quite finished. Now, the program also read the _setup.xml file and extract all datas in it. It also rebuild a traditional INF file.
PS : Maybe, instead of the 145 $ for Cab Manager, my program will become a Cardware (postcard from your location)...
Work in Progress !
2) Drag and Drop from Files Tab : not difficult to do (maybe later).
3) Double click and open files with
- associated application
- Notepad
Click to expand...
Click to collapse
Points 2) and 3) are now implemented. Will be published with future version !
Point 1) for tomorrow !... Maybe...
building cab files...
anyone out there know of any good tutorials for using cabwiz and building an inf file from scratch? I have looked and looked! Basically I want to build some basic theme cabs and a few cabs that make registry changes and then put them into my extended rom. (I do a lot of experimenting and therefore a lot of hard resets!)
thanks, jess
MSCEInf V1.4 New version on line !
Contributions of version 1.4
This version now allows the reading of the files "_ setup.xml" contained in the CAB :
- Rebuilt the tree structure of file XML with possibility of extending or of reducing branches of the tree.
- Also Rebuilt a conventional INF file (can be copied to the clipboard).
- Creates a Memo (can be copied to the clipboard) with the Register keys in a format of the Regedit type (for the "Geeks").
For the CABS with a conventional INF file like those with a "_setup.xml" file :
- Possibility of "Using Folder Names" for files saving.
- Additional Informations on the files with also possibility of sorting on these new columns :
- Size of the file.
- Date and Hour of the file.
- Type of the file (its extension).
- Possibility of Multiselection on the files (Shift, Control).
- Possibility Drag and Drop for one or more files towards the Explorer (Folder, Desktop...).
- Contextual Menu on the file under the cursor (Right Button) allowing :
- Open the file with the associated application (If it is a program - Extension "EXE" - the launching of the program is prohibited, which is surer. The icon of the program is shown) or "Open with..." if there is no association.
- Open the file with the Notepad.
If MSCEinf is defined as an application for opening CAB, the program will be loaded. If it was minimized, it will be restored.
If the button of Checking of Signature is activated, MSCEInf authorizes 2 signatures ' MSCE ' and ' CE4+ ' and only those (If it is not one of the two authorized signatures, the pointer of the mouse positions on the button of checking of signature after having posted a message of alarm). If not activated, there is no checking of the signature of the CAB.
With this version you can reorder columns in Files Tabs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CodePPC Page
MSCEInf Page
English Version
French Version
German Version
hey folks,
after some long waiting, here is the long promised fire theme
i also revisited the landscape icons to make them even better and match the new theme
****************************************************
UPDATE 25th November!
I Uploaded 2 more zip files
"Fire v2.1 (Calendar & Call History included).zip"
The same as the original version, however it included Calender and Call History
"All Files in 1 folder.zip"
This file ONLY contains the required system files. Everything is in 1 folder so that you can install it faster. Please read the "Read me.txt" included.
****************************************************
PLEASE READ ALL MY NOTES AND INSTRUCTIONS BEFORE INSTALLING!
Instructions:
1. Download my file and unzip it on your Storage Card on your mobile
2. Disable TF3D (Settings-Today)
3. Open Total Commander and navigate to the extracted folder
4. Right click on the manila file that you want to use (you can use the ctl button on Total Commander for multiple selection). Do NOT copy the whole folder containing the manila files; copy ONLY the manila files instead!!!!!! For extra information on the way i organized the zip file check Note 2
5. Click on copy/move. Then select the Windows directory on your phone & overwrite if prompted (Caution: your storage card might also have a windows folder. You need to select the one on your phone!)
6. Re-enable TF3D[/B].
7. Soft reset (only if it is not working yet)
8. Installing the volume control icon
(Volume bars from Prewien..I modified the colours to my needs )
Move the bmp file with Total Commander to the windows directory of your phone and then reboot
9. Red Selection in phone dial
Use a registry editor and navigate to HKLM-Software-HTC-Phone and change "highlightcolour" to 861600 in hex mode
Notes:
1. Landscape mode will NOT work on the Diamond by default (only if its modded to do so. Do not ask me how to do it, i have no idea)
2. Folder Content: The zip file contains separate folders each of which includes the files for a different mod. So for example, the folder "Fire Slider" ONLY includes the files required for the slider to work. you ONLY need to copy the manila files. I included the PNG icons in the zip just in case someone wants to mess around with them.
3. In case the icons don't work, use Diamond TF3D config-->Appearance-->Restore Default and then follow my steps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Things to do:
Red Selection in TF3D
Globe in Internet Tab
Modified Program Tab
WOW thanks i waited for this for longggg
fixed the link for the image..works now
Love the new look! I'm gonna try it right away THX
Any chance you can upload the background aswell?
here you go
added a highres landscape image so that it can be seen clearly
Also updated the instructions to make them more clear
so hot!!!!!!
i just updated the topic
Changes: Call History and Calender icons
I also included another file for easier and quicker installation
Please refer to Post 1 for more details
LOL, I assume this will work on the Fuze? Let my dumb ass know please.
Beachboyde
i guess so..
I am using a touch Pro myself
the only difference between the Diamond and Touch Pro, compatibilitywise is that the Diamond does not support landscape mode
New to Themes
Hi, I'm new to this forum and to pocket pc for that matter. I have'nt really installed that many apps on my phone but looking to get into it.
Your instructions seem a little cloudy to me, what is Total commander and where do I find the Windows directory on my phone.
I'm sorry if I sound newbish but.......I am.
Also, how do I do the unzipping? can I use Winrar or is there something special I need? can I do it on the phone or through the PC....
To access File Explorer in a general scenario, go to Start>Programs>File Explorer. Press the 'Up' softkey in bottom left corner of the screen, then tap the Windows folder. This is where 95% of all system files are. Don't play around with this part especially as you're new.
Total Commander is a file explorer type program with more flexibility. Just give it a search in the forum.
just a note to nuke1's post..
total commander allows you to overwrite system files..this is why you need it
of course all other file explorers that do this can be used too..
as about the icons, its just a normal zip file..use whatever you feel comfortable to unzip it
when you install total commander follow my steps above and you should be set
Windows folder --> C:/Windows
Okay I DLed total commander but I don't know how to access my windows folder on my phone. it doesn't show up on the total commander.
I've never used a zip file before (does winrar do it? I even Dled Winzip but I'm not sure if it unzips it when I select the file or do I have to make it do that.)
frustrating.....this is my first pocketpc and I thought it'd be a little easier...
Thanks for any help.
P.S. my phone doesn't show up on total commander at all.
actually its quite easy once you get the hang of it.
there are easier ways of installing stuff. Thats with .cab files. I would love to make those for everyone, but the program that makes it gives me errors in vista...
anyway here are some answers to your questions.
.zip is a compressed folder which can be created within windows (right click-->send to compressed folder). Similarly, you can extract them in windows without the use of another program.
Personally i use WinRar, as you will also find that many people use .rar files. With Winrar you will be able to extract most formats..
Anyway, once you extract the content of the zip file, you get my folder. Youcan use the instructions above to take it from there.
TOTAL COMMANDER:
here are some settings for an easy use of the program.
Click on Show and check "Full"
uncheck "hide files in ROM" too
Go to about/settings and click on single click start (this allows you to enter folders with 1 click instead of 2)
a small explanation
on top of the program you will find an adress bar. Next to it is a "\" This navigates to the root directory. the ".." is for going one folder up.
Anyway, you do not have to access the windows directory in order to use my files..what you can do is this:
Move the files in the storage card. Then press the "/" in TC and then go to storage card. Access my folder, and select the files that you want to copy (Landscape icons are only for the Touch Pro by the way. You only need to select the manila files, nothing else..) You can use the "ctl" button on TC to select multiple files one by one
Once you selected everything, long press on one of them to bring the popup menu
Copy/Move
Click on Tree
** clicking on a + opens a subtree, - closes it. Subtrees are more inclined to the right. The very top one "/" is the root directory..When you open it you get subdirectories (Like Application Data, ConnMgr, Content,.....Storage Card, Temp, Windows)
Select that Windows one and click on OK
Then click on Move...That should do it
I know this post might be a bit messy but hopefully you get an idea of what you have to do.
Tell me if something is unclear
Wow ! Nice job ! Found my new icon set
That was a very good explanation. I'm somewhat familiar with how to use the windows system, it's just that I've never reallly ever run into any zip files before. (probably because I use Winrar and it takes care of all the unzipping without me even knowing it.) Also I've installed programs on my phone before and I usually ran into cab files for instalation so this was a lil different than what I new
Again thank you very much
I can't find the option "hide Rom" on total commander to uncheck so I still can't see my phone files on my computer. Furthermore when I try to just copy and paste them in my phone I get an error message saying "check system memory and/or ROM is protected" when I select to overwrite the files. I know that I have enough memory for these files (about 134mb) so itmust be the later.
what can I do to have my windows folder from my phone shop up on Total Commander?
hmm sounds weird..even the normal file explorer should show the windows directory :s
anyway, from your pc you should copy on the mem card not in any windows foldr on your phone. otherwise you will get an error..
if i have time today i will try making a cab on another pc and see what happens
can you tell me in detail what you did?
I extracted the file from my computer to my memory card with winrar. It showed up on my phone as a folder not a zip file so I'm assuming that's good. I tried copy/paste and cut/paste the manila files (only) from inside the folder of my mem card to the Windows folder of my phone memory. everything but the the extraction to my phone was done on my phone since I couldn't use total commander to copy/move. when I tried to paste the error message was given.
Thanks again...
***** UPDATE MANUAL + NEW FONT - SEE POST 6 ******
After a lot of testing this is the final font changing manual (as far as i'm concerned), based on bhodgin's manual and KDiz additions. With holyfox's tools.
I've only tested on a dutch Touch HD, so maybe the TF3D is built different.
There is quite a diference between my manual and KDiz's manual
I'm assuming the TF3D on the HD is different from the Diamond, hence the difference
So how did i do it:
First copy over all .ttf files from your Blackstones Windows folder to a backup folder somewhere
(turn on hidden and system files in Total Commander or Resco Explorer if you can't see them)
Now choose the font you want to use, i used Continuum (Regular, Bold and Light)
so i started off with 3 ttf files in a folder on my computer.
Make a subfolder and put copy's of your ttf files in it.
1 x light font file, 2 x regular font file and 2 x bold font file
Then rename them according to the following list (added -> to show what file impacts what):
fontname -> changes font in TF3D
cour.ttf -> TF3D light font
tahoma.ttf -> WM regular font (regular text)
tahomabd.ttf -> WM bold font (task and bottembar and other bold text)
neue Helvetica LT 35 Thin.ttf -> TF3D Regular Font (all the bigger title text in TF3D -> Calls, mail title, settings title, weather title etc.)
neue Helvetica LT 55 Roman.ttf -> TF3D Bold Font (all the small text in TF3D -> Appointmentsmail example, settings, weather)
Now you have the above files in your subfolder.
Now follow this procedure for every font:
open the ttf file in FontCreator.
go to Tools > AutoNaming.
Here you enter fontname, click 'Next'.
Another window will open, select 'Finish.'
File > Save
The fontnames you should put in are (i think you will understand wich name goes with what file ):
Courier New
Tahoma
Tahoma Bold
HelveticaNeue LT 35 Thin
HelveticaNeue LT 55 Roman
IF YOU DON'T AUTONAME CORRECTLY IT WILL NOT WORK !!!
Now you have the 5 files in your folder.
Open WinCE CAB Manager. A window will pop up.
Go through the Wizard and fill in a name and cab name and accept the defaults.
Add the newly made .ttf files to the Files tab (open the tab through the Cab tree on the left side).
Select all of the files and rmb to properties. On the location tab select the Windows folder and Apply and OK.
It should now read %Windows% for all 5 files.
Save your CAB, copy to your phone, run it and it should work.
To be on the safe side, disable TF3D when installing the CAB and reset twice (needed sometimes, dunno why) after the install.
You could copy the TTF files manually to the \Windows folder instead of using/creating a CAB.
And here's how my first CAB looks (includes only the fonts):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Background is custom with "Background 4 all tabs"
Icons (HTC_3D), sliders (Pamas Transparent), topcurtain (invisible), bottemcurtain (default), battery all found in the diamond forums.
Continuum by Righteye.Cab (fonts only)
References:
Screenshot made with MyMobiler
Cab made with WinCE CAB Manager.
Clock by kongobongo
http://forum.xda-developers.com/showthread.php?t=437307
http://forum.xda-developers.com/showthread.php?t=419799
http://forum.xda-developers.com/showthread.php?t=424926
Please tell me if you like it and if it works or has any bugs.
Maybe i'll make some more
8-12-2008:
After some serious testing i found some stuff out. Have updated the above text
1) You only need 5 fonts, i can't see what the 2 Helvetica's without 'neue' do, so i left them out
2) Correct Autonaming is essential
3) Added the RadioSpace font from DaFont.com and the screenshot in post nr. 6
Ziet er mooi uit
Looks nice man! Although I prefer my own layout, I might try this one when I get fed up with it. Oh and good to see another GoT user here.
Very nice, maybe someday I will create my own fonts for the HD. Thanks a lot for this. By The way, great to see you somewhere else besides GoT (gathering of tweakers for the people that don´t know GoT).
Looks nice!
would you mind sharing them 3d icons. thanks in advance.
I got the icons from here.
But is also has sliders and a background included. So i first installed HTC_3D and after installed the slider and different bottomcurtain.
Lots of other themes and stuff in that topic !
################################################################################################
Bloody post img. limit..........
But a new font with cab !
RadioSpace Font
RadioSpace by Righteye.cab
sklappe said:
I got the icons from here.
But is also has sliders and a background included. So i first installed HTC_3D and after installed the slider and different bottomcurtain.
Lots of other themes and stuff in that topic !
Click to expand...
Click to collapse
there ain't a cab version for this.
skinniebone said:
there ain't a cab version for this.
Click to expand...
Click to collapse
I never said there was....i just said installed, wich means 'copied the files to the Windows folder'.
sklappe said:
I never said there was....i just said installed, wich means 'copied the files to the Windows folder'.
Click to expand...
Click to collapse
aight ima do the same thing then thanks though
anyone try the cab on english ROM yet?
mallman said:
anyone try the cab on english ROM yet?
Click to expand...
Click to collapse
U want to know to.....ishould work just fine and in the worst case hard reset.
But if you backup your fonts in advance their shoul be no trouble.
How do i know ? While testing i deleted all the fonts from my device and did a soft-reset. The default fonts returned as if by magic (ROM).
thanks, sklappe
heres my custom Eras font,
http://forum.xda-developers.com/showthread.php?p=3006699#post3006699
@sklappe
@sklappe
hi folks!
since I own both TouchHD and Diamond.. I can confirm sklappe's cab works fine of both devices.
cheers
(and thanks Sklappe!!)
Red.
Hi Guys
Question for you all.
1) Is it possible that I only have 3 fonts on my GERMAN HD as I can only find the following files in my widows folder and my "fonts" folder called "Schriftarten" is empty
cour.ttf
tahoma.ttf
tahomabd.ttf
2) I don't have a problem with the fonts only with the size. Thus is there anyway to just to change the font size to something larger.
3) Could I have a link to the thread of colored icons on the top bar of the sklappe screenshots.
Thanks
redeyes717 said:
@sklappe
hi folks!
since I own both TouchHD and Diamond.. I can confirm sklappe's cab works fine of both devices.
cheers
(and thanks Sklappe!!)
Red.
Click to expand...
Click to collapse
Thanks for testing
MDAIIIUser said:
Hi Guys
Question for you all.
1) Is it possible that I only have 3 fonts on my GERMAN HD as I can only find the following files in my widows folder and my "fonts" folder called "Schriftarten" is empty
cour.ttf
tahoma.ttf
tahomabd.ttf
2) I don't have a problem with the fonts only with the size. Thus is there anyway to just to change the font size to something larger.
3) Could I have a link to the thread of colored icons on the top bar of the sklappe screenshots.
Thanks
Click to expand...
Click to collapse
1) Have you turned on "show ROM hidden and system files" ? That was my problem at first.
2) Probably, but nobody's found out how yet.....
3) the taskbar icons are form LAGUNADUB (http://forum.xda-developers.com/showpost.php?p=2914663&postcount=8)
And Pro
sklappe said:
Thanks for testing
1) Have you turned on "show ROM hidden and system files" ? That was my problem at first.
Click to expand...
Click to collapse
Yes and Resco shows me HRSM (Hidden, Read-only, System, roM) on one of my files so I feel that is not the issue.
MDAIIIUser said:
Yes and Resco shows me HRSM (Hidden, Read-only, System, roM) on one of my files so I feel that is not the issue.
Click to expand...
Click to collapse
Just found out that the 'not-neue' Helvetica fonts don't exist
The 'neue fonts' do exist but are very hidden, probably inside another file.
Just dump the new ones in the windows folder and you'll be fine.
Just added a new font to the TS; RadioSPace with CAB and also updated the manual.
SKlappe,
Following your excellent tutorial, I have made three CAB's with different fonts. The problem is that on two of the three attempts, and also your Continuuim CAB, I am experiencing the same problem... The temperature display font is too large, and TF3D cuts it off. This occurs any time the temperature is above single digits (Fahrenheit or Celsius) Do you have any ideas on how to get around this problem? Attached screenshot is using your Continuum font CAB.
what fonts have you tried with?
ok would someone PLZ be kind enough to make me a start icon?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that is the image i need and could some change the Start text to say "CAL" too plz? it would be highly appreciated.
anyone? please
GSM or CDMA? upload you shellres file and ill make one up for you!
apaquette420 said:
GSM or CDMA? upload you shellres file and ill make one up for you!
Click to expand...
Click to collapse
Hi apaquette420, have read this http://forum.xda-developers.com/showthread.php?t=426264 and may be I'm just being an imbecile but I can't find the shellres files it's talking about. The only thing I can find close is a file called "shellresapps.dll.0409". Is this the correct file to modify? Or am I just looking in the wrong place
Any help would be appreciated, the only thing I want to change is the Start Icon to a green Vista orb (the same as in XBmod HD Rom http://forum.xda-developers.com/showthread.php?t=458788)
apaquette420 said:
GSM or CDMA? upload you shellres file and ill make one up for you!
Click to expand...
Click to collapse
it doesnt matter anyshellres file works my dude!
shellres.192.0409.mui is the file u need
i dont need any file you are the one that wants to change your start icon i can put the img you posted in the first post in to my shell file but there are other icons that will be different so if thats what you want i will do that for you???
here you go, just copy to you windows dir and rename the orig on .bak. post a screen shot to show me how it turned out.
xavierdemon said:
Hi apaquette420, have read this http://forum.xda-developers.com/showthread.php?t=426264 and may be I'm just being an imbecile but I can't find the shellres files it's talking about. The only thing I can find close is a file called "shellresapps.dll.0409". Is this the correct file to modify? Or am I just looking in the wrong place
Any help would be appreciated, the only thing I want to change is the Start Icon to a green Vista orb (the same as in XBmod HD Rom http://forum.xda-developers.com/showthread.php?t=458788)
Click to expand...
Click to collapse
are you on GSM or CDMA ???what program are you using to find the file in your windows dir???
i'm gonna need a copy of the icon you want i cant find a download link
double post please delete
apaquette420 said:
are you on GSM or CDMA ???what program are you using to find the file in your windows dir???
i'm gonna need a copy of the icon you want i cant find a download link
Click to expand...
Click to collapse
It's GSM and am using Resco Explorer, can only locate the following files by doing a search for shell*.*
shell32
shellcelog
shellres.192
shellres
shellres.dll.0409
shellresapps.192
shellresapps.96
shellresapps
shellresapps.dll.0409
Which one is it
GSM users need to mod the shellres.192.dll to change the start icon, so copy that file off your phone and upload it here, but you still need to find the orb you want because i can not find a download link!
apaquette420 said:
GSM users need to mod the shellres.192.dll to change the start icon, so copy that file off your phone and upload it here, but you still need to find the orb you want because i can not find a download link!
Click to expand...
Click to collapse
its in the first post its the actual image but its white so its hard to see n um cdma
when i changed the size of the img you posted in the first post the colour changed on its own i can try again to see if i can keep it white
edit : even when i save the img it goes black, sorry your gonna need to get someone else to make it up for you.
I think I am making a meal out of this but I can't bloody copy the file lol (shellres), have tried Resco Explorer and just tried Total Commander, is there another app that can actually do what I want it to do, which is copy the file somewhere else. Once I've managed to copy the bloody thing, I can begin the search for the ORB lol.
I am tempted to forget about, as it does seem to much hassle
just get the orb and i will get the shellres file you need! soo as you find the orb upload it and i will get it working for you
Right finally managed to get the shellres.192.dll off my phone (using ROM extractor), even managed to find location of icon to be changed (292 + 293) in Resource Hacker. So far so good but I can't find the bloody green vista orb lol (pictured here http://forum.ppcgeeks.com/showthread.php?t=54514).
So sod it, can't be bothered anymore.
However just to clarify the complete process.
1. Rom Extractor - to get file
2. Unsigner - to unsign it
3. Resource Hacker - to replace the icon
4. MSsigner - to resign the file
5. Copy back to Windows directory (I bet this stage would have gone wrong as well anyway lol
Thanks for all your help apaquette420.
I may decide to give it a go when I find the elusive Vista Green Orb
xavierdemon said:
Right finally managed to get the shellres.192.dll off my phone (using ROM extractor), even managed to find location of icon to be changed (292 + 293) in Resource Hacker. So far so good but I can't find the bloody green vista orb lol (pictured here http://forum.ppcgeeks.com/showthread.php?t=54514).
So sod it, can't be bothered anymore.
However just to clarify the complete process.
1. Rom Extractor - to get file
2. Unsigner - to unsign it
3. Resource Hacker - to replace the icon
4. MSsigner - to resign the file
5. Copy back to Windows directory (I bet this stage would have gone wrong as well anyway lol
Thanks for all your help apaquette420.
I may decide to give it a go when I find the elusive Vista Green Orb
Click to expand...
Click to collapse
yep you got all the steps right i have this orb if you want it thanks goes to CrazyLiLbOy for the icon
Xboxmod has kindly given me the file containing the orb but can't get the Unsigner working lol.
Have uploaded my "shellres.192.dll" and the file containing the orb "shellres.192.dll.0409.mui" the orb is in position 292 in the mui file.
apaquette420 is there any chance you can take the orb from the mui file and put it in my shellres.192.dll file?
xavierdemon said:
Xboxmod has kindly given me the file containing the orb but can't get the Unsigner working lol.
Have uploaded my "shellres.192.dll" and the file containing the orb "shellres.192.dll.0409.mui" the orb is in position 292 in the mui file.
apaquette420 is there any chance you can take the orb from the mui file and put it in my shellres.192.dll file?
Click to expand...
Click to collapse
here you go man just un-zip and copy to your windows folder on your phone!!
Cheers fella, just one last problem (I promise ) as anticipated by myself lol, I can't copy the shellres.192.dll back into the Windows directory. Have tried doing it by Active Sync and by using Resco Explorer to move the file from Internal Storage to the Windows directory. I have also tried to rename the exsisting shellres.192.dll file but i'm not able to do that either lol
So for the love of GOD how the hell do you copy it back into the Windows directory? Do I need another application or something?
Am tempted to use a hammer lol
xavierdemon said:
Am tempted to use a hammer lol
Click to expand...
Click to collapse
LOL you dont need to go that far lol!!! have you installed and of the All-In-On cab files to mod your taskbar?? the only reason i ask is the only way i was able to swap files in the windows dir was after i installed one of tsowen's task bar cabs if i just tried to swap the file before i installed the cab i could not change any files. so what i did was installed sdkcerts then one of the all in on taskbar cabs then the nue power drivers(so your batt shows the correct power state) then soft reset , then i would copy my changed files over and i was able to swap the files..
Does anyone else know how he can swap the file out with out going though all these steps????
if not try it and see how it goes just remember to do a back up with PIM or SKtools because that way you will be fine if you have to hard reset!!!
let me know how it goes. I will be out for the night, but i will check back in the morning. good luck lol
I'm trying to include a newer Google Maps and a few other applications and converted the .cab installers to EXT in osKitchen. They get included in the list in EXT Packages and I select all of them but still I cant find them when I have flashed my ROM to my device.
Am I supposed to do something more?
Double check that they are in the windows folder. All you should have to do is check the package.
djr83 said:
I'm trying to include a newer Google Maps and a few other applications and converted the .cab installers to EXT in osKitchen. They get included in the list in EXT Packages and I select all of them but still I cant find them when I have flashed my ROM to my device.
Am I supposed to do something more?
Click to expand...
Click to collapse
If your ROM is not in english you have to edit the app.dat to use the correct start menu folder.
look into or show us your buildlog...
airxtreme said:
If your ROM is not in english you have to edit the app.dat to use the correct start menu folder.
Click to expand...
Click to collapse
Thanks! Havent tried the new rom yet but the paths in app.dat was wrong.
But I do have to change the path to the programs folder too, I guess?
When I check the path in file explorer it says \Program and in app.dat it says \Program Files.
If you use cab 2 oem and oem 2 ext the app.dat is automatic created with the correct path.
So if you use a WWE package it will be 'Program files' and for the shortcut 'start menu'. If you use another language (Dutch for example) 'program files' has another name 'programma bestanden' and 'start menu' becomes 'startmenu' in Dutch.
So you need to correct that path according to the language you use.
You can use initflashfiles.dat as an example for every language you use.
djr83 said:
Thanks! Havent tried the new rom yet but the paths in app.dat was wrong.
But I do have to change the path to the programs folder too, I guess?
When I check the path in file explorer it says \Program and in app.dat it says \Program Files.
Click to expand...
Click to collapse
Laurentius26 said:
If you use cab 2 oem and oem 2 ext the app.dat is automatic created with the correct path.
So if you use a WWE package it will be 'Program files' and for the shortcut 'start menu'. If you use another language (Dutch for example) 'program files' has another name 'programma bestanden' and 'start menu' becomes 'startmenu' in Dutch.
So you need to correct that path according to the language you use.
You can use initflashfiles.dat as an example for every language you use.
Click to expand...
Click to collapse
I'm using osKitchen Zero 1.31 beta1 and cab 2 oem doesnt seem to exist anymore. I think it was in my old kitchen, osKitchen 1.25 but I dont use that anymore.
One of my cabs is actually a today screen plugin. How do I choose what plugins which should be selected from start?
Hmm the program files gets into the correct folder and a link is created in the start menu, but the link doesnt start the program. I guess it's still pointing to the wrong path.
How do I fix this?
djr83 said:
I'm using osKitchen Zero 1.31 beta1 and cab 2 oem doesnt seem to exist anymore. I think it was in my old kitchen, osKitchen 1.25 but I dont use that anymore.
One of my cabs is actually a today screen plugin. How do I choose what plugins which should be selected from start?
Click to expand...
Click to collapse
Everything is in the universal package converter now
djr83 said:
Hmm the program files gets into the correct folder and a link is created in the start menu, but the link doesnt start the program. I guess it's still pointing to the wrong path.
How do I fix this?
Click to expand...
Click to collapse
Just edit the shortcut; total commander works well.
Farmer Ted said:
Just edit the shortcut; total commander works well.
Click to expand...
Click to collapse
Cant I change that in the ROM? I dont want to have to change a lot after flashing.
I did a quick search for you:
http://forum.xda-developers.com/showthread.php?t=510806&highlight=cab2oem
Today items you enable/disabled like the sample of registry below.
1 is enabled and 0 is disabled.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\HTC Sense]
"Enabled"=dword:1
djr83 said:
I'm using osKitchen Zero 1.31 beta1 and cab 2 oem doesnt seem to exist anymore. I think it was in my old kitchen, osKitchen 1.25 but I dont use that anymore.
One of my cabs is actually a today screen plugin. How do I choose what plugins which should be selected from start?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Laurentius26 said:
Today items you enable/disabled like the sample of registry below.
1 is enabled and 0 is disabled.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\HTC Sense]
"Enabled"=dword:1
Click to expand...
Click to collapse
Thanks! But the plugin doesnt even show up in plugin list when I pre-install it in the ROM. The plugin is TodayAgenda. Do I need to do something more when adding today screen plugins?
djr83 said:
Cant I change that in the ROM? I dont want to have to change a lot after flashing.
Click to expand...
Click to collapse
Just edit the shortcut and then swap the new one into your package for the bad one. Although this whole topic is confusing. Are you trying to install cabs during customization, or are you trying to make actual packages from cabs? If it's the former, then you'll need to edit the .cab file to fix the shortcuts (if they are the problem).
Farmer Ted said:
Just edit the shortcut and then swap the new one into your package for the bad one. Although this whole topic is confusing. Are you trying to install cabs during customization, or are you trying to make actual packages from cabs? If it's the former, then you'll need to edit the .cab file to fix the shortcuts (if they are the problem).
Click to expand...
Click to collapse
I want to be able to select which programs I want to include in the ROM. How it gets included doesnt matter (I think?).
What's the difference between installing them during customization and making packages?
I found the bad shortcuts now, thanks, so I guess that problem is solved now. But please tell me the difference between customization installing and packages. I want to do it the correct way
There are different ways to include apps into a rom. Installing a cab during customization isn't a whole lot different then just installing a cab normally. There's nothing really special about it, except that the cab file is stored in rom. This could be a good thing or a bad thing, depending on how you look at it. You don't get any of the benefits of cooking an app into rom when you use cab files.
Creating a package means extracting the files (and reg keys, if there are any) from the cab file and then cooking them directly into the rom. In many cases, you can re-locate the application directly into the \windows folder (from \program files), and this saves space and shortens the time for first boot. You may also be able to convert some of the files to modules, which can increase performance (mainly, the apps boot up faster), but it doesn't always work. Modules can also save a bit of ram by loading code into the page pool. As an example, you can create a package with TCPMP (core player) that loads all of the files directly into the rom. This is much better than having the files in their own folder in \program files\tcpmp, because you don't end up having duplicate files in \windows (if you use an app.dat to copy the files into the program file directory) or one big cab file sitting in \windows. It saves on storage. Also, some of the .dll's and the .exe can be made into modules.
On the other hand, some apps just don't work if the files aren't placed in the proper directory. I've had a bugger of a time getting the new resco keyboard to work properly. Most of the time, you can just move files and sub-folders from program files straight into \windows, but it doesn't work with resco keyboard. The bloody skin files have to be located in \program files\resco keyboard pro\skins (the same goes for the language and sound files). It's not a big deal, but I could save a bit of space if I could locate some of the files in \windows. I get these files into the program files directory by unzipping a zip file with a mortscript during customization. Zips are easier to edit than cabs, and install faster, so that's what I prefer to use. You also don't have to bother with uninstall info (I always seem to leave that crap in when I pack a cab, even though it's pretty much useless to me).
Customization is the step after the screen alignment. It's basically the time when you pretty up your rom, and put in the final touches so that when the phone is fully booted up, it's just the way you want it.
Your post is just kind of unclear. It sounds like you're just trying to install cabs during customization, but some people are telling you how to extract cabs to make EXT's. I'm not really sure what you're asking.
Farmer Ted said:
There are different ways to include apps into a rom. Installing a cab during customization isn't a whole lot different then just installing a cab normally. There's nothing really special about it, except that the cab file is stored in rom. This could be a good thing or a bad thing, depending on how you look at it. You don't get any of the benefits of cooking an app into rom when you use cab files.
Creating a package means extracting the files (and reg keys, if there are any) from the cab file and then cooking them directly into the rom. In many cases, you can re-locate the application directly into the \windows folder (from \program files), and this saves space and shortens the time for first boot. You may also be able to convert some of the files to modules, which can increase performance (mainly, the apps boot up faster), but it doesn't always work. Modules can also save a bit of ram by loading code into the page pool. As an example, you can create a package with TCPMP (core player) that loads all of the files directly into the rom. This is much better than having the files in their own folder in \program files\tcpmp, because you don't end up having duplicate files in \windows (if you use an app.dat to copy the files into the program file directory) or one big cab file sitting in \windows. It saves on storage. Also, some of the .dll's and the .exe can be made into modules.
On the other hand, some apps just don't work if the files aren't placed in the proper directory. I've had a bugger of a time getting the new resco keyboard to work properly. Most of the time, you can just move files and sub-folders from program files straight into \windows, but it doesn't work with resco keyboard. The bloody skin files have to be located in \program files\resco keyboard pro\skins (the same goes for the language and sound files). It's not a big deal, but I could save a bit of space if I could locate some of the files in \windows. I get these files into the program files directory by unzipping a zip file with a mortscript during customization. Zips are easier to edit than cabs, and install faster, so that's what I prefer to use. You also don't have to bother with uninstall info (I always seem to leave that crap in when I pack a cab, even though it's pretty much useless to me).
Customization is the step after the screen alignment. It's basically the time when you pretty up your rom, and put in the final touches so that when the phone is fully booted up, it's just the way you want it.
Your post is just kind of unclear. It sounds like you're just trying to install cabs during customization, but some people are telling you how to extract cabs to make EXT's. I'm not really sure what you're asking.
Click to expand...
Click to collapse
What I'm doing now is definitly makeing EXT's. But that doesnt mean I'm sure that it is what I want to do. I just want to include some programs in the ROM from the beginning and EXT's seems like a good way to go.
But if I want to install cabs during customization, how do I do that?
You create an EXT:
Sample:
Yourpackage\
Yourpackage\files\your cab
And you add a line to config.txt so it will be autoinstalled during device setup.
A sample of that line:
CAB: \Windows\your_app.cab
djr83 said:
What I'm doing now is definitly makeing EXT's. But that doesnt mean I'm sure that it is what I want to do. I just want to include some programs in the ROM from the beginning and EXT's seems like a good way to go.
But if I want to install cabs during customization, how do I do that?
Click to expand...
Click to collapse
Laurentius26 said:
You create an EXT:
Sample:
Yourpackage\
Yourpackage\files\your cab
And you add a line to config.txt so it will be autoinstalled during device setup.
A sample of that line:
CAB: \Windows\your_app.cab
Click to expand...
Click to collapse
Where should this config.txt be? Yourpackage\config.txt?
And can I add an app.reg to this EXT so I get some settings installed too? Will these settings be applied before or after the cab-install?