Hi,
mi configuration is:
TyTN
Rom: Schap's 3.30c (05/15/2007)
Radio: 1.43.00.00
Protcol: 32.76.7020.19H
i can not use the bluetooth hands free feature in my car.
With Schap's 3.30a italian it work but 3.30c english i can join the phone to the bluetooth but even if i set as hands-free the connection i can not hear nothing from the loudspeaker of the car.
Anyone can help me?
Simone
PS excuse for my poor english!
Bluetooth Connection For Car Stereo
Riker1312 said:
Hi,
mi configuration is:
TyTN
Rom: Schap's 3.30c (05/15/2007)
Radio: 1.43.00.00
Protcol: 32.76.7020.19H
i can not use the bluetooth hands free feature in my car.
With Schap's 3.30a italian it work but 3.30c english i can join the phone to the bluetooth but even if i set as hands-free the connection i can not hear nothing from the loudspeaker of the car.
Anyone can help me?
Simone
PS excuse for my poor english!
Click to expand...
Click to collapse
I found I had the same problem, until I purchased a bluetooth extension from www.jetwaremobile.com
Sorry it's not free, but works well. What you might want to do, is the trial period to make sure it works for you... I've tested it with WM5 and WM6 and works great! Not very familiar with your ROM, but think it should still work!
It works!
thank you!
Simone
Related
After trying at least 10 different conbinations of rom/bt stack/patch, finally get bt GPS and A2DP headset to co-exist on my XDA II. I want to thank the brains of this forum...
BTW, Here is the first impression:
1.A2DP functioning well.
2.AVRCP also works!
3.Sound quality is great, no dropping/cut-off.
4.Machine is a bit slower when streaming music.
5.Occational re-bonding of the BT GPS receiver needed, but painless, takes less than a minute.
Still enjoying/testing...
I'm using i-Mate PPCPE (XDA II), Moto HT-820 headset, Belkin(Fortuna?) BT GPS receiver. WM5 ROM 2.01a.32WWE (dl from buzzdev), Radio 1.18.00...
Thanks again guys!
WOW, please tel us how?
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Re: WOW, please tel us how?
MrGucciman said:
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Click to expand...
Click to collapse
If you only need stereo headset, ROM1.72WWE will be okay, just install widcomm BT stack (http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=73), you don't need wm5.
If you have BT GPS as well, you need to upgrade to wm5, everything works; or you can use xda2jojo's WM2003seUpgrade (http://forum.xda-developers.com/vie...days=0&postorder=asc&highlight=2003se&start=0), but you have to switch between MS BT stack and wicomm BT stack to use stereo headset and GPS.
good luck.
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
I had the same problem the only solution is to uninstall HELMI_BA_WM5_BT1.7_TEST.CAB and all the patches that go with it. I think HELMI_BA_WM5_BT1.7_TEST.CAB does not work with WM6. HELMI Please and all the experts can you look into this, I would love to use it.
Thanks
Wils
I have xplode latest ROM on my Siemens SX66 and I dont face those problems. I had updated to WM6 straight from WM2003SE
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
After installing HELMI_BA_WM5_BT1.7_TEST.CAB... you should not install helmi enable MS BT... maybe this is the problem... BT1.7 is the broadcom version and you are patching it with ms bt cab... you only install the helmi enable ms bt if you are moving back to ms bt...
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga
Please let a moderator move this to the general Polaris section...
Hello,
I have an Artemis and now also a Polaris. For my Artemis I use the HTC BH S100 headset and a JVC KD-BT1 caraudio. Both work excellent for my Artemis. But my headset won't connect to my Polaris even though I completly cleared all pairings: it cannot find the headset. Connecting to my caraudio works but it keeps disconnecting/reconnecting.
Furthermore, when I have my poweradapter plugged-in, I can only hear the person I'm speaking with on the external speaker.
Anybody else have this/these issue(s)?
PS: I have these issues on original WWE and other ROM's.
Hello,
I have Polaris, ROM M-Anime 2.0 Final, Radio 1.59.44.02.
Is very good rom, but still I cant find sulution with my bluetooth headset. (Plantronics pl-510 and Nokia BH801).
Pairing is ok, no problem, but when call no sound in headset, and later polaris frezz, I cant do anything, only soft reset helps.
In forum I read some solution, but they not help ?(change bit poll and etc.)
Maybe someone know realy good solution?
Thank you
P.S. Obex and Active Sync is working
I have Plantronics Voyager 520 (dual), I use C_Shekar 3.18.931aCS WWE Radio 1.59.44.02. and all works well...
Mano42, can you wrote me registry entries
Hkey_local_machine-software-microsoft-bluetooth-A2DP
Thank you