i have tried the latest update again... and cant seem to get it to work...
any ideas how to get it to work ?
anyone else had luck ?
I also tried everything and can't get it to work Help is appreciated!
NOT WORKING...but http://www.freewareppc.com says that the new Slide2Unlock 1.82 is compatible with WM6...but haven't tried yet..
Related
Hi friends,
I purchased an unlocked version of GSM Touch Diamond from newegg.com while I was in US. I realised later that I could not find any FM radio in it. How do I know if its just hidden (though that would be absurd) or not present at all ? How can I get it, if it can be done (and I would assume a rom update) ?
Secondly, I installed the latest version of GSen, got it to be run at startup and when I rebooted my phone, it said that GSen would not start bcos of some damn error. I had to uninstall. Any ideas how I can get around this ?
My rom version is 1.93
Thanks,
Kunal
koolvirgo said:
Hi friends,
I purchased an unlocked version of GSM Touch Diamond from newegg.com while I was in US. I realised later that I could not find any FM radio in it. How do I know if its just hidden (though that would be absurd) or not present at all ? How can I get it, if it can be done (and I would assume a rom update) ?
Secondly, I installed the latest version of GSen, got it to be run at startup and when I rebooted my phone, it said that GSen would not start bcos of some damn error. I had to uninstall. Any ideas how I can get around this ?
My rom version is 1.93
Thanks,
Kunal
Click to expand...
Click to collapse
In order to 'unlock'the FM radio you need to replace your ROM with a cooked ROM that has it built in. There is no way to enable it without doing so. Also GSen is an old program and I never had much luck with it. I would recommend Gyrator2 as it is a much more stable and gives more options for customization. Hope it helps!! Both of these answers could be found in the xda forums with just a little bit of searching...
I was able to get the FM Radio without replacing my original ROM by downloading the radio cab file from this post -
http://forum.xda-developers.com/showthread.php?p=3099232
This could probably help others like me.
cheers,
Kunal
First of all I would like thank Skywing for writing this GPS Application
Gateway for the xv6800 phone with stock rom or upgraded MR1 rom..
This thread is to show my thanks and to help new ppl like myself
find this app easer.. It took me about haft a day searching two forums
just to find what I was looking for .. so I hope this will help other
new ppl find what they are looking for much easer ..
Again this application was written by “Skywing” and someone wrote
the easy install CAB for his app .. also like thank “gc14“ for writing
the tutorial ..
This Application aGPS aka GPS Server aka (Valhalla Legends GPSServer.cab)
Will allow your 100% stock rom or MR1 rom on your xv6800 Phone
to access GPS signal via 3rd party application e.g. MS Live search, Google maps etc..
without the need to unlock the phone or do anything to the phone other than
simply loading the GPSServer.cab file ..
For step-by-step install info. go to: http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
To download the CAB go to: http://rapidshare.com/files/165096506/Valhalla_Legends_GPSServer.cab
Show your thanks to Skywing, go to his thread: http://forum.xda-developers.com/showthread.php?t=424387
I have personal testing this code on my xv6800 with stock ROM, then I
upgraded to the MR1 ROM from HTC for the xv6800 with WM 6.1 and
install the GPSServer.cab and it works perfect for both ROMs without
doing any unlocking or running anything else other then just the GPSServer.cab
BTW for anyone with the stock ROM running WM 6.0 and would like to
upgrade to Windows Mobile 6.1 .. you can download the MR1 ROM direly
from HTC
Again this is the, Verizon XV6800 ROM MR1
Release Date: 2008-08-23
go to: http://www.htc.com/us/SupportDownload.aspx?p_id=82&cat=2&dl_id=99
If this link does not work you may need to set your “country” first, (top right of the page “select country” set to “United States”
wow .. update: also found out that gc14 made the CAB file as well..
Thanks again gc14
gc14 post: http://forum.xda-developers.com/showpost.php?p=2625473&postcount=113
Thanks! It works very good with Google Maps
Is your WIFI works with WM6.1? After I installed MR1, my WIFI is not working anymore. I hope you might be able to help me.
TIA
to all that created this thank you, works flawless on the stock mr2 rom
can't get it to work..
Hi all! I followed this method a while back and had Google maps working great for quite some time! This past weekend I tried to use it with GPS and it couldn't find any satellites. I figured it was maybe too much cloud cover or other interference related to my location. Anyhow, yesterday I updated my XV6800 to MR2, installed the latest Google maps (3.0.0.12) and still cannot get it to find any satellites. after playing with the COM ports and location setting (currently COM4 and Loc ON) without success I installed GPS Toggle, which also cannot find any satellites.
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Bugsy68 said:
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Click to expand...
Click to collapse
Read the last couple of pages
http://forum.xda-developers.com/showthread.php?t=424387
thanks drewcam888. I'll check it out this afternoon and let you know how I make out.
BTW, I was looking around my device and I found a different version of gpsapi.dll (hidden) in the Windows directory. I'm thinking this may be the problem. It won't let me modify it though, as it's a system file. I can view it using SKTools, but not modify it.
Can you recommend a file manager program that'll let me move / copy / replace system files?
Thanks!
You can't modify a rom file or one that is created by the rom itself. Or at least I don't know how
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
cdeleoxda said:
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
Click to expand...
Click to collapse
Read the thread for a while that drewcam8888 lists above "adapter program to ......" and then make sure you change the registry settings as it describes for Valhalla in the posts from the past couple of days. I believe I posted #627 which has the places to edit for Valhalla. Listen to what others say to make sure you have everything right.
mine failed around the same time but using a different set of cab files which had worked flawlessly on both previous installs of MR1 . Is this perhaps something from verizon?....Anyway having not installed from a wrar file before how do you install the valhalla cab when the redirects disconnect from the server?
I have a xv6800 and i got it last week, the person that i got it from updated the rom. a couple days ago i cleared the storage, which i guess is a hard reset, but i wanted to know if that resets my Rom
thanks
Tyve
resets to a fresh install of your current rom. It removes all none rom files.
so do i hav to re-hack the rom to use google maps?
i have no idea wut im doing,
thanks
Yes you do
dang, that sux. thanks a bunch
my ROM version is 3.57.605.2 does anyone know if that is hacked or not?
Not it is stock verizon MR2
ok, do u know an easy way to hack it, im only 14 and i suk at hacking it
Hi all!
My Diamond is on [v5]PDACornerIllusion 21042, I installed it and all's working great! Still there's one little problem... I can't activate the bluetooth, I don't know why, I click on the activation button and it tells me to wait but then- nothing, bluetooth never activates... :'( I went to the settings so I could activate it there, but still nothing... I tried it all, hard and soft reset several times but still nothing...
Please, tell me what can I do?? Thanks.
Same Problem here...
Hi just wanna bump this thread...
I'm having this problem too bro...
Have tried the following workarounds/solutions but to no avail:
- Flashed a Stock Rom, works, but flashed back to a custom rom, the problem returns.
- while in custom rom, tried flashing different Radio Roms but still no bluetooth.
- Used MTTY method (See here: http://forum.xda-developers.com/showthread.php?t=540290&highlight=mtty) but still no luck...
- This has been going on for about 2 months or so for me... been trying these methods with different Stock, Custom and Radio Roms. Could manage to get it alive for a short while (3 - 4 soft resets later...) and the darn bluetooth juz wouldn't come ON again...
- Sigh!!!!
Hope somebody out there has a fix or encountered this problem, and explain to me in detail how you remedied the problem. Cos' I'm afraid that I could be doing something wrong (tho i think i explained pretty clearly, did i?) :S
hi bulletproof_78,
have u ever found a solution for this and fixed the problem?
i am also having this problem since i flashed a cooked rom...
tried everything but no luck....
thanks.
i also have a touch diamond p3700 and do not have any problem with my blue tooth
also using a cooked rom. ormet rom wwe wm6.5 standartversion with cookie home tab .
the album and video call doesnt work there is a fix for it .
find herg62123 htcalbumtp2 for the album and x videotelephony diamond swtos for the videocall .the best rom i found for the htc diamond and every thing works try it out . and it really looks good too works for me
hey guys
I seem to be facing a problem with my garmin mobile xt...i was using it wednesday without a problem then on wednesday night i installed the 3g comm manager cab and yesterday i found this problem so i unstalled it and reinstalled it just now but the problem's still there...there's a screenshot below to see the problem.... can anyone help? Thanks
Rom:Stock 1.66
Manila : 2.5.1921
Radio: 2.06.51.07
anyone with any ideas? the error is reeeeeeeeaaaaaaaalllllllyyyyyyy bugging me
I have the same error, first I had it working fine, then after I changed roms it started doing that..... I dont know, hope someone can advise us...
erebusting said:
I have the same error, first I had it working fine, then after I changed roms it started doing that..... I dont know, hope someone can advise us...
Click to expand...
Click to collapse
I got my garmin running again...i tried http://forum.xda-developers.com/showthread.php?t=404112 but i didnt work so i just hard resetted it...you should try that first, hopefully it works
I love Spotify on my PC so was excited to see it being released for WinMo as I have a HTC HD2. I even upgraded to the Premium service to just to check it out.
BUT.......After trying the market place and also downloading the CAB file, both these method result in "installation was not successful".
Anyone else have problems or can help?
Hi, I downloaded the cab and it installed fine for me, infact this is an amazing app, even picks up on my music networked folders and integrates them too. Not sure why you have an issue though. I have stock o2 rom btw. 1.72 I think.
Just had a thought, make sure your Netframework is upto date 3.5 I thnk is the one I`m on.
I'm using Vodafone's most recent ROM 1.72.
How do check / update the Framework 3.5?
Try this method and also try searching these forums; lots of other people have been trying to get this too.
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
I did a hard reset (always hate doing that) and its seems to have sorted out the problem.
Will try and add .net 3.5 as well though.
Thanks