Related
G'day all,
Well I got my jasjar today, and essentially I was originally under the impression that with this I would be able to use the wireless technologies of my laptop and jasjar to sync outlook, and browse the fiels on the notebook etc.
Then reality hit me.
You cannot sync via wireless. Then as it turns out I have no clue on how to setup a wireless network..
So im just wondering if anyone can inform me, is it possible for my jasjar and centrino notebook to communicate with each other wirelessly? If so what do I need to do in order to do that.
Thanks in advance
a very confused wireless enthusiast.
ActiveSync will not work on wi-fi, but you can setup a device-to-device network and use files on a share on your computer. If your Centrino has Bluetooth, you can use ActiveSync with that.
i have AS over bluetooth fine, and allows me to browse the internet etc
i have WIFI configured at home and work which allows me to browse shared folders with passwords and permission, run terminal server to my XP and our Terminal Server, and allows me to run Terminal Server over wireless over the internet direct to my remote work servers.
so it really depends on what you want to achieve, it will more than likely be a combination solution.
WIFI <> AS
WIFI = Internet and Shares and Terminal Server
WIFI = Streaming music and videos
Bluetooth = AS
Bluetooth = Internet
Bluetooth <> Shares and Terminal Server
Well my laptop doesnt have bluetooth so that is no good to me.
Yeah I just want to access the laptops music, video or documents wirelessly. Im a little or completely lost as how to do this, I do not have broadband, and I have no networking experience really.
All I have is a Centrino laptop armed with the latest wifi components, and a jasjar.
I managed to make a device-to-device connection as someone suggested, and the devices appeared to connect, but I couldnt seem to do anything with them as such.
Try Resco Explorer (www.resco.net) It allows you to map network drives (once you have your device-to-device connection sorted)
Wiz - Off topic but can you share how you got your O2 Exec Blackberry Enabled? I'd like to do the same. Ta - philg
Got resco explorer, gotta say thats a handy lil feature packed app. But to my problem at hand....does anyone have or can anyone give me a run down of how to get a device-to-device networking happenng.
I can get the two devices to connect as such via wifi, both jasjar says connected as does XP, however when I go to map a network drive, in Resco or XP fo rthat matter, I just an a message saying no computer is connected or availbe. This despite the fact that it is right there!!
Any suggestions, tutorial recommendations?
Thanks.
r u using xp pro or home?
what sort of antivirus r u running?
firewall? ms or other
any other security settings imposed?
generally, go to pc, find folder u want to connect to, RMC, properties, sharing, enable with a name you like, apply security with password (nb sharinmg over wifi will allow others to access without security).
goto pda, resco, map drive, type in \\computername\sharename, enter your username to log onto pc and password (assuming these were the same pemissions you applied when setting up)
I had this working using a wifi access point via a local router, but norton screwed it up and been unable to fix....
Yes XP Pro
Default Network Security really, like I said ive never really used them or accessed the features so usually keep em closed.
and running NIS 2005. But yeah look im not a total noob, ie I disabled NIS at one point to see if that was hampering the connections, and even enabled it and enabled full access and that did nothing either.
what you suggested I pretty much did.
however, when ive set up the device to device connection it gives me security options ie WEP WPA etc, done these restrict other networks from using the shared folder?
I ask because there are a fare few wireless networks around me, wouldnt want to give any of them access to my stuff, even if it is only my music and some documents.
If you start your WIFI on your PPC and PC, does the WIFI icon on the PPC create the connection, ie the antennae and two arrows that remain still.
If so, then you have got the connection to the PC, we just then need to get the folders and access to each other. If not, then we cant get any further till we resolve this issue.
RMC My Computer or go to control panel system. Far right Tab allow remote connections, tick the box to allow. This should allow a Terminal Server connection from your PPC to your PC. So find out the IP of your PC, then open TSC and enter the same IP address and see if it connects. If it starts to get create a connection via GPRS/3G cancel it. This will be due to the "My Work" and "Internet" settings which we will have to come back to.
If it you can open a TSC then you have established the WIFI and can create and authenticate a connection, so it means we have a problem with the foler sharing.
So in summary, doing the above will:
1. Estabish that the WIFI connection using WEP is working
2. That you are connecting over the same common network using TSC to connect and control your PC from your PPC
3. THat the problems are folder sharing related
Let me know how you go.
I wont be able to try these suggestions until tomorrow but im pretty confident one of these will work, thanks for taking the time, I will definitely try em tomorrow.
But just for what information I have ATM, yes the wifi icon you described is there, so like I said the PPC is definitely connecting, just when its connected I dont seem to be able to do much.
Will let you know how I go
THanks again
I have resolved the problem that I have been having with connecting to a network share, when I could before and cant now....
The answer was simple, and I cant believe how simple.
The answer was found here, and posted by DUTCH
http://forum.xda-developers.com/viewtopic.php?t=21317&highlight=network+wifi+connection+share
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
If your not sure where this is let me know, but it provided and immediate fix for me. ...
Well, actually, I did two things simultaneously, so not sure which actually worked. I also went into the specific connectsion > Network Cards on the PPC, Network Adapter set to work, then Wireless tab, found the specific network opened this and changed this from internet to work.
So the combineation of the IP settings and the change from internet to work allows my ppc to connect to my computers folder shares.
well, i tested it furter.
If i left the work setting on my network, then when I used the internet, it opened and connected a gprs connection to open the web site.
so i changed the network connect back to "the internet", and was able to use the network card to connect to the internet and access the web.
I was also STILL able to access a network share whilst the network connected to "the internet", so the solution for me was
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network
I just bought a usb wi-fi dongle so that i can connect to my wizard in office over wi-fi. Can anyone give any pointers how can i do file sharing in ad-hoc mode in such a way that i can access files on my office PC through my wizard without having a separate access point.
I tried connecting through ad-hoc mode and my wizard connects to the PC but doesn't show any shared folders and cannot find my PC (not even through IP) when using resco file explorer...
shantzg001 said:
I just bought a usb wi-fi dongle so that i can connect to my wizard in office over wi-fi. Can anyone give any pointers how can i do file sharing in ad-hoc mode in such a way that i can access files on my office PC through my wizard without having a separate access point.
I tried connecting through ad-hoc mode and my wizard connects to the PC but doesn't show any shared folders and cannot find my PC (not even through IP) when using resco file explorer...
Click to expand...
Click to collapse
To browse network folder on your HTC you should install some additional software. I've tried PocketLAN to share files between notebook and HTC via Wi-Fi. It've been working flawlessly. But you have to set IP and network mask on your HTC as it's in the office network.
Hmmm, i just installed pocketlan...I saw that my PPC gets an IP of 169.254.11.69 (subnet mask 255.255.0.0) and mycomp gets an ip of 169.254.87.204. Now am able to ping my comp using pocketlan on my PPC but am not able to map it. Whenever i try to do it, it says network address/name cannot be found.
that's strange What OS do you use?
You don't need any 3rd party software...
The Wizard will do this with it's built in file explorer.
Windows XP is the OS...
Did it finally after umpteen number of tries...Turns out ICS is necessary even for simple file sharing even though i do not want to surf net thru my PC's connection. And I also had to unplug my lan cable as the IP windows tries to assign once ICS is on is 192.168.0.x and this range is already used by my lan thus causing a conflict...Anyways, its better than nothing..I just wanted a faster medium to transfer files than BT which is painfully slow..
Any idea when are they going to provide an upgrade to BT 2.0 for wizard?
Hi,
I have a strange problem with my Glofiish X500 / WM5. No issues with establishing the wifi connection to my access point connected to the home desktop machine with Windows XP. The desktop is conneted to the Internet through the ADSL modem. The ADSL connection is shared. So, once connected, I can go to the Internet from my X500, sync Outlook, etc. The Internet is fine. But when I try to open a shared resource on my desktop, it is very slow. It takes couple minutes to open almost any folder. Copying files takes forever. But it is only if I use standard X500 connectivity tools. Once I install the Wifi Companion tool, all connections become just flying as they should. Copying files is not an issue. I am wondering what is that magic in the Wifi Companion? I tried to tweak different things without it and nothing helped. While with Wifi Companion, no special tweaks are necessary - automatically assigned IP / DNS are working just fine.
I am observing this issue only with my home network. Once in the office, I can successfully browse the local network without Wifi Companion. You might reasonably say - why would not you just use the Wifi Companion? Well, I would, but it is not stable. I cannot go to a connection setup - the setup screen is immediately rewritten by the connections list. The Companion's taskbar icon disappears pretty soon after the installation while it keeps working. Sometimes wifi connection is established, but Wifi Companion does not catch it and shows no connections at all.
So, I would really appreciate if anyone has any ideas what can be done with my home network in order to let the X500 work with its own tools. Perhaps it is something to do with WINS setup or something else that Wifi Companion sets up?
Thanks,
Vitaly
Bump
I'm suffering a similar problem. I use a Prophet running WM5 and I finding that it takes forever to establish a connection (if at all) with shared folders on my PC (running WinXP). Once connected the connection is slow and often drops. I find that this is the case no matter what file browser I use. However, I use a VNC browser (PTvnc) and I find it works quickly and flawlessly allowing me to browse my PC's shared folders without any issues. Obviously PTvnc handles the network better than the standard file browser ... so it's not a hardware issue but rather some sort of software setting. I use a Belkin WIFI router.
Any help greatly appreciated.
in my kjam
When I enter on the net by Wi-Fi network
I want to share net from Mobile
To
Desktop computer
But when I use internet sharing program
I can not find the wireless network which is connected to it
Is the only existing mobile network gprs
Watch the video and you will understand
http://www.mediafire.com/?yagi80wfc95gdf5
http://www.mediafire.com/?jsc8ia1gjgxikg9
I hope the solution
I want to connect to a wireless network and I share net...To
Desktop computer
i use now
Pocket Controller-Pro
but i want internet sharing
...
no thing?!!!!!!!!!!!!!!!!!!
Maybe you could try it by installing HTC Wifi Router on your device
i will try with this prog .............
thanks i use this program when i connect to my gprs
but dont work when i use wireless