Related
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
1. Does it consume extra battery life if the GPRS is alawys on?
2. When I'm connected but not actively doing anything (upload/download), does the device keep communicating with the service provider? i.e. sending control information back and forth even when i am actively not using it?
3. If the GPRS connection is active, are there any chances my phone reception or the phone's ability to get a phone call/SMS/MMS is adversely affected? I dont want people not to be able to contact me or send sms/mms because my phone is always connected on GPRS.
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
1 yes like your phone use more power when you speak in your phone it use lot more power then not using it
2 a bit not too much
3 it should not
4 www.GB-SOFT.cz/xdaII should add some features
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
Mind you, I use an MDA I.
as far as I know, the only way to get off and stay off GPRS is to go to settings->system->memmory->running programs and close anything that might use it (mailbox, IE, etc...)
If the signal indicator says it's connected to GPRS, then yes, you are actively connected to the tower/cell network. Sending info constantly, I don't know?????
GPRS effecting other network connectiveity???? I've heard yay and nay and have no professional opinion. Personally, I have no problems recieving a call, sms, etc... while connected to GPRS.
As far as power consumption, I would assume yes, it sucks up power. I have noticed about a 15% increase in power consumption using the web for an hour or so per day as well as automaticly checking email once every 45 minutes.
I also recently discovered a beautiful little prog that I cooked into my MDA I OS. PocketNav. It allows you to switch programs, close certain ones with only two "clicks", or all the progs at once, etc.... Check it out!!! It will be worth your time (I don't know where to get it other than stephan's kitchen).
Good luck!
gsm and sms should disable grps while it's using the band
but not cause problems
there is also the program PHM task manager
which is pretty much a copy of the task manager in windows 2k and xp so if people know and like that then it's a good program
Dustoff said:
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
Click to expand...
Click to collapse
He Dustoff,
Great stuff! Worked fine for me. Thanks.
Ronald
Dustoff,
Where is the Red dsiconnect button I am supposed to press and hold?
I am using WM2003 and after Iam connected, i havent been able to find any place where there is any disconnect option. in the connection bubble all i can see is that i am "connected" but there is nowhere for me to disconnect.
Can you please let me know where you find this disconnect option.
thanks
Red disconnect button
It is simply the red button of the telephone.
On another hand, if someone calls you exactly in the same moment when yours GPRS is fully active downloading something (a big picture, a long message, ...), you may appear as "unavailable"
Rudegar said:
4 www.GB-SOFT.cz/xdaII should add some features
Click to expand...
Click to collapse
Hi.
I have not tried the above software yet, but here is the problem I have...
I use Wi-Fi a lot at home and quite often keep the Wi-Fi on and use WiFiFoFum away from home. I have managed to set up my pay as you go GPRS connection. But whenever I'm away from a Wi-Fi network the GPRS connects and my applications then access the internet.
There needs to be an option of "not connecting gprs automatically when there is no Wi-Fi connection."
What I have had to do is change one of the setting for the gprs so it cant connect, and I have to change it back when I need it.
Switching from Wi-Fi to gprs can cost a lot if things connect without me knowing. It costs £3 for a months use of 1Mb.
Regards,
Ian Watson
creating a phantom connection, and "picking" it as default may be slightly quicker than changing the settings of you primary connection.
I think holding down the HANGUP/STOP button for 2-3 seconds is the fastest and easiest way.
interestingfellow said:
creating a phantom connection, and "picking" it as default may be slightly quicker than changing the settings of you primary connection.
Click to expand...
Click to collapse
I have found where I can stop it from connecting the GPRS if it cant get a wi-fi conncetion. Connections icon on the connections tab, then the advanced tab, then the select networks button - "programs that automaticall connect to the internet..........". I have changed this from gprs to my isp.
Ian
I found a lot of posts where people ask for auto disconnect. My problem is the other way round: When I connect with GPRS after some 5 minutes or so my QTEK S200 disconnects by itself. This might be caused by the cab file MP_autoDisconnect_EnableDRM_prophetUA(AKU2.0)_060112.cab which I found in enhanced ROM?
I don't want to hard reset to see the effect this cab not beeing installed. Any ideas to help???
I have the same problem... lets see if anyone knows how to enable GPRS for longer then only 6 minutes.
I have the same problem... lets see if anyone knows how to enable GPRS for longer then only 6 minutes.
it's because of your mobile operator. i've the same sh.t here. it keeps disconnecting after 5-10 minutes and the traffic rounds up. and i have to pay more... i've a hima, my friend's SE W800 - same crap, keeps disconnecting. i'm sick of GSM networks, they're getting old and do not meet modern speed and reliability requirements. so i'm afraid we'll just have to wait until WiMAX or something else comes to replace an old man. cheers
You might wanna try this from wiki here:
If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 1 (DWORD decimal)
And to turn it off:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 0 (DWORD decimal)
Note that |gprs connection name| will depend on the name you've given your GPRS connection
I'm on tmobile web n walk, so its a pain to wait for gprs to reconnect everytime.... I've just started using this for about a day, but looks ok so far... try it... see if its the magic ur looking for
zep said:
it's because of your mobile operator. i've the same sh.t here. it keeps disconnecting after 5-10 minutes and the traffic rounds up. and i have to pay more... i've a hima, my friend's SE W800 - same crap, keeps disconnecting. i'm sick of GSM networks, they're getting old and do not meet modern speed and reliability requirements. so i'm afraid we'll just have to wait until WiMAX or something else comes to replace an old man. cheers
Click to expand...
Click to collapse
I don't think it's connected to the provider as I know enough people using the same provider where GPRS stays connected a long time. The only difference we have is the PPC. I will try jamichy's solution later this week when I will be back home. In the meantime Craic Dub - does it solve the problem on your side?
jamichy said:
You might wanna try this from wiki here:
If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 1 (DWORD decimal)
And to turn it off:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 0 (DWORD decimal)
Note that |gprs connection name| will depend on the name you've given your GPRS connection
I'm on tmobile web n walk, so its a pain to wait for gprs to reconnect everytime.... I've just started using this for about a day, but looks ok so far... try it... see if its the magic ur looking for
Click to expand...
Click to collapse
O.k. I couldn't wait and tested today. Now the connection seems to stay as long as you do not stop it.
But: It connects automatically to GPRS when you connect the phone to your provider. That's not really what I wanted. In other countries this will create extreme roaming costs.
Any other idea on how to stop this auto connect? Even using phonealarm's "do not start GPRS automatically" does not help, again it starts connecting when you dial in your Phone PIN.
:?
Seems the Reg Hack is not a brilliant idea... I have setup my device to power off display after 2min... when i press power button to come out of standby, it freezes the device for abt 40 to 50 sec
Its worse when i get an incoming call, the screen is on but does not respond to touch or pressing green button...
So i changed registry back... and bingo, everythings ok again....
But now, i've found another way, a little freeware app that does all I want and more, and you get the option to choose connect gprs on boot or connect when needed... etc... take a look at:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
I'm using now, and seems ok
jamichy said:
:?
Seems the Reg Hack is not a brilliant idea... I have setup my device to power off display after 2min... when i press power button to come out of standby, it freezes the device for abt 40 to 50 sec
Its worse when i get an incoming call, the screen is on but does not respond to touch or pressing green button...
So i changed registry back... and bingo, everythings ok again....
But now, i've found another way, a little freeware app that does all I want and more, and you get the option to choose connect gprs on boot or connect when needed... etc... take a look at:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
I'm using now, and seems ok
Click to expand...
Click to collapse
Sounds interesting. Still difficult for me to understand what it really does:
- What means "search GPRS [G] on start radio"
- What means "start [G] on start GPRS
- What means "Switch GRPS always On/Off hold till for following connection"
Can you tell me what it does non your side? Im a startting to hesitate trying to many things. I am still not convinced of WM5 - I installed GPS pgrs monitor (on QTEK CD...) which did not work together with phone alarm. And to deinstall was the ususal WM5 hassle, only using sktools and manual deletion of a file after another soft reser I was able to remove it again
Search GPRS ON start radio=gprs connects on startup
Start G on start GPRS=gprs connects when an application needs web connection, and stays connected
Switch GRPS always On/Off hold till for following connection=default settings, connect when needed, then disconnect
Havent had the phone freeze problem, and gprs connects on startup, and stays connected... which is fine for my tariff, tmobile web n walk unlimited gprs
jamichy said:
Search GPRS ON start radio=gprs connects on startup
Start G on start GPRS=gprs connects when an application needs web connection, and stays connected
Switch GRPS always On/Off hold till for following connection=default settings, connect when needed, then disconnect
Havent had the phone freeze problem, and gprs connects on startup, and stays connected... which is fine for my tariff, tmobile web n walk unlimited gprs
Click to expand...
Click to collapse
Seems to work flawlessly so far on my S200. Thanks for your help Jamichy!!
The only thing I'am still missing is EDGE in Germany... :wink:
Is it possible to setup the 8525 so that it only connects to internet through Wi-Fi and not any of the other options? Based on some threads, it looked like Cingular has disabled this option, but I am not quite sure. Thanks.
The only way I was able to do it was to call Cingular Tech and have them disable the GPRS on their end, now if I go to PIE and the WiFi is off, the GPRS/EDGE Connection pop-up opens, then I get an error message saying the network could not be found and a dismiss icon....
The only way it will connect to IE is through WiFi now.
ringostar said:
Is it possible to setup the 8525 so that it only connects to internet through Wi-Fi and not any of the other options? Based on some threads, it looked like Cingular has disabled this option, but I am not quite sure. Thanks.
Click to expand...
Click to collapse
if you go to settings then connection and delete the connection settings for gprs it will not connect and you can use wifi only
however i seem to keep getting gprs not connected error if i do so?
I'm having the same problem. I'm totally green to the high tech world. Heck this is my first attempt at anything greater than using my calculator function in a phone So if someone could walk me through what I need to do to set my phone up so I can connet through wifi i would reaaaally appreciate it.
I had Cingular put me on the no data plan (not even pay per use). In case that makes a difference.
Thanks in advance for the help.
All I did was go in to the connection settings and change the User name and Password. I do not get any error messages stating the network cannot be found. I get a login screen with User/Pass and Domain. I just click cancel and it drops back to IE.
Now I do not have to worry about accidentally connecting to their service.
well,we can very much achieve it -- In the internet settings in connections,select both of them to My ISP,edit it to nowap.cingular.com
Make sure setting is set to Internet,not work!
I did it and I use only wifi all the time!!
The previous solutions are not really workable for me since I don't want to delete my cellular data connection, I just want to be able to turn it on and off as I choose. With Windows Live, I can have a Wifi connection and turn off cellular data in the comm manager screen and it will just open the cellular connection again.
A hack to turn off the "auto connect" for the cellular data would be great. Make it like the BT or WIFI, where I have to go to the comm screen and turn it on. That choice would be great.
Anyhow, I am thinking of making the Work connection as the default, then deleting all work connections. Then when I actually want a cellular data connection, I could manually select it and say connect. I'm not sure if the applications will close it and try the work connection again or not. I will try it and post again, probably tomorrow.
MM
This works wonders:
http://www.benrichards.co.uk/?p=180
ETA: This is what I have been using to deal with gprs autoconnect on my 8525 and it's perfect for my uses. You just start the program and toggle on or off the data connections.
Gprs Disable
It really works thanks for your research
I was wondering how to turn off the slide control on TouchFlo so that the phone stays "open" after it hibernates.
Also, whenever I want to connect to WiFi at home, it asks for the password... how can I save the encryption key inside the phone?
Thanks!
Ok I figured out the 2 questions and came up with 1 more. I clicked around the phone and clicking on iLock turns off the slider. And the encryption key seems to be saved now.
When I go to IE, however, it will try to connect through GPRS, even though I don't have it. How can I delete GPRS from the phone (will never use it) or disable it and make it use WiFi first?
Thanks!
Do a search, there are threads on disabling GPRS. You need to manually start wifi. IE will then use wifi even if GPRS is configured.
schmenge said:
Do a search, there are threads on disabling GPRS. You need to manually start wifi. IE will then use wifi even if GPRS is configured.
Click to expand...
Click to collapse
Comm manager shows Wifi on. Settings->WiFi shows connected. The WiFi icon is alive and kicking at the top of the screen. And it still goes only for GPRS
Can you verify that wifi is actually working by getting out vis some other application (like email)? What specific device do you have (8125, Qtek, etc.)?
is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks
+1 good idea, anyone got anything on this?
Andi,
The solution I would use would be to go to Settings>Wireless Controls and simply switch Data Connections off, Wifi On when at home.
You would have to remember to to reverse this when done if you want to access 3G services.
WB
u could use G-Profile.. It allows you to set up different profiles and switch them automatically based on your current cell id. Wifi on/3G off when at home, other way around when not. Works like a charm for me
thanks for the tip but when I do that it then automatically turns it back on even when I'm connected to the wireless hub, all of a sudden they both are on . . . . . . .?? any ideas ??
i have the same problem... it keeps using my 3G/EDGE network even if WIFI is available... and i dont get it how can HTC afford not to give us an option to set that the phone asks you for permission when connecting to 3G/EDGE network... this **** costs and im not really happy about the fact that my phone can connect to a network whenever it feels like.
(and yes this **** keeps happening even tho i disabled automatic updates in weather/time applications.)
In BSB tweaks if you press options I think there is an option to disable all data connections. I have never tried it but maybe it will override all connection attempt? Give it a try. Also, I flashed to the 2.01 ROM and I think the data connections are a little less persistent, though I don't wan't to guarantee anything!
andi1977dog said:
is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks
Click to expand...
Click to collapse
does it not do that by default? i cant send emails through t-email when i'm at home - I just presumed this was because i was connected through my wireless router. turning off wifi allows me to send emails.
thus I presumed wifi takes preference?
I am wondering the same thing. The idealist situation would be to have both connections active at the same time, and let the HD2 make sure that wifi is used when the connection is there. Is there some kind of application to verify which connection is being used?
Great thread - I am not the only HD2 owner who is annoyed with the problem with the HD2 switching on its GRPS data connection without my approval!!!
Could it be that the HD2 turns off the wifi when it goes to sleep and then tries to connect to the web using the GPRS network? In that case how do I prevent turning off WIFI when in sleepmode?
I read somewhere else in this forum about a G-profile. Being a newbie with HTC I have no idea what this is. Any clue?
But overall: Yes, it would be great if HTC added an option to set network connection preferences.
WiFi does take preference if it's connected! Dont forget when you are at home and you turn your phone on from standby it will take 10sec or so to connect to your WiFi router, if you try and use IE, Opera, Twitter, Weather Update, Email, etc... before it's connected it will fire up your 3G data connection!
The phone does not how ever turn off your data conn when it's idle which is annoying! You need to use Bandswitch or CommManager from here http://www.commmgrpro.com/jsp/main_frame.jsf;jsessionid=103F335931311F019BD540B82E479383 or WMLonglife from this forum (do a search).
there must be someone out there with ghe know how and expertise to solve this ?? glad to see its an issue for othet folk, i like the idea for selecting wi fi over gprs if its there to be selected.......
I found out that my HD2 automatically closes the 3G connection when I have wifi active. I'm not sure why it does that, I know pretty sure that it had not always done that. But I'm quite happy with it
It turns 3G on again after disconnecting from WIFI, which is what I want.
so if you tap the notifications tab and the "contratc internet" is counting and the wi fii is connected it is using the wifi and not the "contract internet" even though the timer is counting ???
Can anyone confirm ???
p.s tried using the G-Profile software, it seems very inconsistant and didnt always turn off what it should when you select the profile so im going to unistall it.
for some reason the automatic internet settings from vodafone messes up/hides the "The Internet" or "MyISP" connection that is in the phone originally.. I even hard resetted but you just can't seem to stop the automatic settings..
disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc..
the same with email only checking through 3G and not wifi.. but set the server settings of your account to "The Internet" after you disabled the proxy.. (advanced settings at the smpt server tab)
hope this helps.. but a thing worries me, as I don't know anything about proxies, why does vodafone specify a proxy if we don't realy need one.. to port us over their live portal or something? (on my old sony ericsson the track ID service didn't work because of that)
"disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc.."
thanks but how do i do this ??
anyone know how i do this ? thanks
After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!
tnyborg said:
After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!
Click to expand...
Click to collapse
I believe my Wifi connection is kept alive, even in sleepmode.
Josan123 said:
I believe my Wifi connection is kept alive, even in sleepmode.
Click to expand...
Click to collapse
Sorry, forgot to mention this - but in order to save battery power I have asked the unit to close down the WIFI when in sleepmode (using BsB Tweaks). And indeed it gives me more battery life.