Related
I don't know if this is something you can do, but can you find a way to do this on the tf3d?:
1) Edit the "calender" button on the main screen so I can choose it to launch Pocket Informant calender instead of the normal calender?
2) Edit the ammount of agendas to be shown on the main screen? I mean,it only displays like two?
3) Get rid of the call history on the main screen for more room.
4) Make it so if I click on the clock, it won't go to the clock editing screen? Twice my time changed when I had it in my pocket. I REALLY wish the power button on my FUZE was as harder to push as the one on the Tilt.
5) Get rid of the delay when going from one tab to another? I don't mean the heavy delay on the contacts tab, but the 1-2 second pause when going from one tab to another? I think the pause is from a screen fade or something.
And this one would be hard:
1) Would it be possible to make the clock 50% smaller so more appointments show on the main screen without swiping to the secondary main screen?
Anybody? I think the clock one might be possible, but haven't found a small one yet.
Hey!
1. & 4. It is possible there is a little prog out here that redirects that buttons.
5. I think is not possible because it caused by a lag cpu power sometimes
The rest: +1
I was thinking the same about the home screen. But there are some heavy problems.
-No SDK --> Everything has to be coded in tf3d's mode9/lua language/script mix that is hardly known. Especially editing mode9 is a pain in the ass at this time, cause there is no documentation and everything has to be cracked. Anyway, there are a few people that understand the platform enough to be able to somthing like that.
I was working on a semiautomated mode9 editor but havn't got the time... perhaps I will resume that project one day.
Then it would be possible...
starstreak said:
I don't know if this is something you can do, but can you find a way to do this on the tf3d?:
1) Edit the "calender" button on the main screen so I can choose it to launch
Click to expand...
Click to collapse
are you talking about the softkey. the 'button' at the bottom of the screen? you can edit your softkeys by editing the keys in this directory:
Go to the HKEY_LOCAL_MACHINE\Software\HTC\Manila key in your registry
homeRSK is right softkey.
No, not the two soft buttons. The one that's actually in TF3D. The one that says Calender on the TODAY part of the screen
ngravatt said:
are you talking about the softkey. the 'button' at the bottom of the screen? you can edit your softkeys by editing the keys in this directory:
Go to the HKEY_LOCAL_MACHINE\Software\HTC\Manila key in your registry
homeRSK is right softkey.
Click to expand...
Click to collapse
I would like to resurrect this topic, as I have exactly the same questions which - to date, remain unanswered.
My agenda thingy suddenly diceded it was time to stop working as a button :s
when I press it noting happens?!?
So I would like the button to start working again AND would like he rest as well.
someone? any help? ideas?
mderm said:
Hey!
1. & 4. It is possible there is a little prog out here that redirects that buttons.
5. I think is not possible because it caused by a lag cpu power sometimes
The rest: +1
I was thinking the same about the home screen. But there are some heavy problems.
-No SDK --> Everything has to be coded in tf3d's mode9/lua language/script mix that is hardly known. Especially editing mode9 is a pain in the ass at this time, cause there is no documentation and everything has to be cracked. Anyway, there are a few people that understand the platform enough to be able to somthing like that.
I was working on a semiautomated mode9 editor but havn't got the time... perhaps I will resume that project one day.
Then it would be possible...
Click to expand...
Click to collapse
I think you mean SSMaPa, you can get it here > http://forum.xda-developers.com/showthread.php?t=407777
iharkins said:
I think you mean SSMaPa, you can get it here > http://forum.xda-developers.com/showthread.php?t=407777
Click to expand...
Click to collapse
Thanks! That's exactly what I need.
I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
the only thing i can thing of is use s2u2 or any other locking app
egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay
Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?
i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.
god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.
pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!
update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)
xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought
xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither
The menu icon on the home screen takes a lot of space. There could be 4 icons in there instead. Can it be removed and then bond to another phisical key like the press of the ball?
zenderady said:
The menu icon on the home screen takes a lot of space. There could be 4 icons in there instead. Can it be removed and then bond to another phisical key like the press of the ball?
Click to expand...
Click to collapse
Not really understanding what your asking. Are you talking about when you hit your menu button?
I am also not really understanding the question which is why I didn't respond the first time the OP created the thread.
To OP:
Please don't make multiple threads for the same question just because your not getting a response!
DirectMatrix said:
I am also not really understanding the question which is why I didn't respond the first time the OP created the thread.
To OP:
Please don't make multiple threads for the same question just because your not getting a response!
Click to expand...
Click to collapse
Ok I'm glad I wasn't the only one. This was the first thread I looked at when I got into work. Had to wipe the sleep out my eyes take a sip of coffee and try to figure out this question.
Are they talking about the app drawer and phone tab slider on a Hero ROM maybe?????
DirectMatrix said:
Are they talking about the app drawer and phone tab slider on a Hero ROM maybe?????
Click to expand...
Click to collapse
Thats what I was thinking, but not quite sure. Just waiting on OP to respond.
I think he/she means the app draw, that's the only thing that makes sense.
1) That would require a complete re-write of the app
2) It wouldn't give you enough vertical space for the icon and text
3) All the buttons are already used (shocker!) The trackball can be used to select an icon and click on it, so that would have to be disbaled.
ok thx for the answears and sorry I crated 2 threads about this one. On the first one I messed up the thread name so I thought nobody would read it. Going back, I am talking about the button that is on the bottom of the screen, the one that pulls up all the apps. That one takes a lot of space, actually a whole row where there could be other icons instead.
So I was thinking if there is a possibility to link that menu to an actual phisical key, like pressing the scrolling ball.
zenderady said:
ok thx for the answears and sorry I crated 2 threads about this one. On the first one I messed up the thread name so I thought nobody would read it. Going back, I am talking about the button that is on the bottom of the screen, the one that pulls up all the apps. That one takes a lot of space, actually a whole row where there could be other icons instead.
So I was thinking if there is a possibility to link that menu to an actual phisical key, like pressing the scrolling ball.
Click to expand...
Click to collapse
Yep, that's what I thought, read my post above, it will explain why it's pointless.
actually the ahome does put 4 new icons on that bottom part but I don't know how to bind the trackball. No it would not have to be disabled the trackball action as long as there is no icon pressed. So the drawar would be pulled when the trackball would be pressed only if no icon is pressed, otherwise the icon would start
Yes because aHome moves all the other icons closer together, which would require lots of work to get launcher.apk to do the same.
dxtop has a 5 icon dock, and can deploy launcher by holding menu key.
since there is no phone/talk button,like on the g1, will we have to go to the home screen to use the dialer? Or is there another way?
i remember seeing a tiny app that puts a shortcut to the dialer in the notification bar, can't remember the name though ...
EDIT: try "bar control"
All seven of the home screens have a phone button at the bottom, so you're never more than two button presses from the phone. That said, I know it's possible to reassign a long press of the search button in Android, so it may be possible to map that to the dialer but I don't know for sure.
I guess it's not that big of a deal, once you get used to it, but I'm just so used to my mt3g.
It' gonna take awhile
I'll have to get used to it too. I've owned many Treos and WM phones, all of which had hardware send and end buttons. It's a first for me, but it's just one extra key press so it shouldn't be too bad. The bigger change for me is that this will be my first smartphone without a hardware QWERTY keyboard.
Also, I found this app which also adds phone and/or contacts to the notification bar: http://www.appbrain.com/app/com.application.dialeratbar2
tatnai said:
i remember seeing a tiny app that puts a shortcut to the dialer in the notification bar, can't remember the name though ...
EDIT: try "bar control"
Click to expand...
Click to collapse
It's called [email protected] A must have app on the Evo
I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
JVogler said:
I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
Click to expand...
Click to collapse
I actually prefer the full screen version, it is easy to use with the finger. Touching to the left or right of the volume indicator will remove the display and go back to your normal screen.
yatrg said:
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
Click to expand...
Click to collapse
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
hitekredneck said:
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
Click to expand...
Click to collapse
It removes it. I like it, the volume buttons are more responsive instead of take a second or 2 to actually change, and the full screen is annoying.
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
firefurby said:
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
Click to expand...
Click to collapse
Setting this value to "1" will give you the slim vertical slider on the left of the screen, but this slider is not operable by touch on the screen, it is only a visual aid to let you know where your volume is at when you press the vol up and down hardware buttons.