Related
I'm curious if its possible to disable the align screen shortcut on the Wizard (Enter Button in center plus Messages Button) Its really annoying when playing Doom or an emulator in landscape and having that popup all the time. Does anyone know a fix for this?
Unfortunately i dont have an answer for you. but i do have aquestion that i hope youcan answer. I got myself a doom launcher. It works well, but the control setup is terrible on the wizard. If i play in portrait mode, the fire button is the left soft key. So i ahve to fire with the same finger that i use to move. That makes the game unplayable. What launcher are you using and where did you get it?
I haven't done any testing or trying yet, but here is my idea...
what if you rename the align screen app, just so it stops it from launching?
Unfortunately i dont have an answer for you. but i do have aquestion that i hope youcan answer. I got myself a doom launcher. It works well, but the control setup is terrible on the wizard. If i play in portrait mode, the fire button is the left soft key. So i ahve to fire with the same finger that i use to move. That makes the game unplayable. What launcher are you using and where did you get it?
Click to expand...
Click to collapse
Its called GF Doom (I'm sorry but I don't remember where I got it or whom made it. Although if the creator see's this I would love for him/her to PM me as I also have some questions.) Anyway the launcher shouldn't control the Key Mapping, usually thats done in some sort of config file. With the program that I have the keys are mapped in the skin file's txt document.
Try this, unzip all contents into your storage card and run the launcher you should get Doom, Doom II, and Plutonia (sometimes called Ultimate Doom) as well as a 3rd party mod called Evilution. Keep the default skin, with that the keys I have mapped are:
The directional Buttons for Movement, Messages button for Fire and strafe(I would like to change strafe to volume up/down or Internet but have not been able to if you can figure this out let me know), and the softkeys for Select and Start.
The screen defaults to protrait with your choosen skin. To play in full landscape start the game in the options change the resolution to "low" and it will switch, Hope this helps
I can't seem to get the attachment to work here is the link ftp://[email protected]/Uploads/
the file is pocket doom.zip
A Flock of Seagulls are in my Wizard
It would be awesome to find a way to disable this. Is there maybe an entry in the registry that corresponds to what key combination turns on the align screen program. Maybe it could be changed to some combination of keys that is very unlikely to be executed simultaneously.
Until then, I'll continue to drink foo-foo drinks to calm myself while trying to play any action games.
GF Doom
Dragonedge:
What version of GF Doom do you have? Maybe I have an old version. When I enter full screen mode, the soft keys are shoot and strafe, while the message/IE buttons are menu and escape. I have to use the same hand to shoot as I do to move.
Thanks for the tip about full screen, I would never have figured that out. Now I'm not dissapointed with the program anymore.
Lol, funny posts. Is this still a problem? Does it need investigating?
V
I still have the problem........ working on some things now.
What version of GF Doom do you have? Maybe I have an old version. When I enter full screen mode, the soft keys are shoot and strafe, while the message/IE buttons are menu and escape. I have to use the same hand to shoot as I do to move.
Thanks for the tip about full screen, I would never have figured that out. Now I'm not dissapointed with the program anymore.
Click to expand...
Click to collapse
Not sure what version it is. Check out the ftp I uploaded a zip file with everything I use. Also you can edit the skin files to remap the softkeys as well as the messaging and internet keys. All the information about remapping the buttons is in the skins folder in a txt file names Skin Specs.
Lol, funny posts. Is this still a problem? Does it need investigating?
Click to expand...
Click to collapse
The only problem I had was being able to map the message and internet buttons as different keys. Also I would like to use the volume slider as a left and righ strafe but could not seem to get that mapped either. Any help there would be great.
I've made an app to disable this - VJCalibrula for Universal and Hermes.
Wizard requires a slightly different hack, and I don't have one to test on.
dragonedge: what hardware/ROM are you using? I'll try to get you to alpha test if you want.
V
dragonedge: what hardware/ROM are you using? I'll try to get you to alpha test if you want.
Click to expand...
Click to collapse
I wouldn't mind at all . I have the T-mobile MDA/Wizard with the 2.26 ROM
An app to disable this would be handy another idea that would be nice is an app that would let you specify another button combination for system shortcuts would be awesome.
VJCalibrula - disable align screen settings (alpha)
Guys, please give this a go.
I don't think it supports AKU 3.2 for now. Soon...
http://forum.xda-developers.com/showthread.php?t=282152
V
Is there a way to create a today plugin to use the camera's flash as a flashlight?
PLEASE READ the F*cking WIKI,
Here you go,
Yes, that is indeed its formal name, the "F*cking WIKI".
My app VJCandela might help (I recommend VJCandela lite).
Also, if you're asking the question, you probably also want to install VJLumos III on your Hermes. It's nice.
V
Lately I was making myself familiar with VJCandelaLite (pardon me, merely "Flashlight.exe" that I found somewhere) and ran into strange behavior. Further experiments revealed the following.
I created a shortcut in the Start Menu with intention to always launch VJCandelaLite this way because all hardware keys are already occupied. Now, if the shortcut is activated via the touch screen (finger or stylus), everything is OK. However if I use joystick keys to open the menu, scroll to the shortcut and start it, the flash just flashes briefly -- it's even hard to notice it. That's sad; the touch screen is always worth saving (too delicate for me), hardware keys are way better.
Then I discovered that if the flash has successfully turned on, any keypress turns it off immediately Only afterwards I found vijay555's homepage and things got a bit clearer. The rest is simple logic.
I believe that VJCandelaLite should start checking keys not immediately but after some time -- say, 500 ms. Is there a need for very short flashes anyway?
Windkracht13 said:
PLEASE READ the F*cking WIKI,
Here you go,
Click to expand...
Click to collapse
haha i second that.
Windkracht13 said:
PLEASE READ the F*cking WIKI,
Here you go,
Click to expand...
Click to collapse
well said lol
I've found that a white image on the front screen illuminates better than using the flash. Just an FYI.
saimhe said:
I created a shortcut in the Start Menu with intention to always launch VJCandelaLite this way because all hardware keys are already occupied. Now, if the shortcut is activated via the touch screen (finger or stylus), everything is OK. However if I use joystick keys to open the menu, scroll to the shortcut and start it, the flash just flashes briefly -- it's even hard to notice it. That's sad; the touch screen is always worth saving (too delicate for me), hardware keys are way better.
Click to expand...
Click to collapse
Try holding the middle button in. You'll find it stays on.
Doom Tints said:
I've found that a white image on the front screen illuminates better than using the flash. Just an FYI.
Click to expand...
Click to collapse
Hehe i love sarcasm..
N2A said:
Try holding the middle button in.
Click to expand...
Click to collapse
Excellent! Thank you, it works.
Source Code Finally Posted...
Sorry it took so long to post the source. I haven't been monitoring this thread for some time due to other time demands. A recent email reminded me that I promised to release the source, so here ya go...
Release 6 Notes Below...
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
Release 6 Notes
The slider bug was fixed.
The Message option was fixed.
Application Invocation
Lockdown [-lock] [-close]
With the -lock parameter, the application starts in lock mode.
With the -close parameter, the application is removed from memory (if running).
Registry Options in Folder \HKEY_LOCAL_MACHINE\Software\Lockdown\Slider
Position (DWORD, 0):
If set to 0, the slider is centered.
If > 0, the slider is positioned X pixels below the "Top Taskbar".
If < 0, the slider is positioned X pixels above the "Bottom Taskbar".
Padding (DWORD, 2):
Pixel offsets for slider arrow from the left and right edges of the slider window.
Message (String, "Slide right to unlock.")
The text message displayed in the slider window.
TextColor (DWORD, 00FFFFFF hex):
Color of slider message. Note that the HEX color format is 00BBGGRR where BB is blue, GG is green, and RR is red.
FontPoint (DWORD, 16):
The font size of the slider message.
PenColor (DWORD, 00F04050 hex):
Color of the slider arrow.
BackgroundColor (DWORD, 00CCCCCC hex):
Color of the slider background.
WidthMultiplier (String, .92):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider width.
For example: If the desktop display is 240 by 320 and the WidthMultiplier is 0.9, the slider width is 216 (240 X .9) pixels.
HeightMultiplier (String, .22):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider height.
TabWidthMultiplier (String, 1.5):
Must be a floating point value. Multiply this value with the calculated slider height to determine the width of the slider arrow.
Note that the height of the arrow is always equal to the height of the slider.
EnableAnswer (DWORD, 1):
If set to 1, the answer button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the answer button is always disabled.
EnableIgnore (DWORD, 1):
If set to 1, the ignore button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the ignore button is always disabled.
After the installation, only the Position key will be present in the registry. I figure that most users will only tweak this value.
To modify the other parameters, add the appropriate keys with the defined types as shown in parenthesis. The default values are also listed in the parenthesis.
If you decide to tweak these parameters, please remove any shortcut to Lockdown from the StartUp folder. While I've taken steps to prevent "bad" values in these parameters, I still suggest this precaution.
Please note that Lockdown must be terminated and restarted before any changes to registry settings take effect.
As always, if you have any issues, please let me know.
W James
Very Great app...im sure many will find it useful
Does not work on my CDMA Touch
Tried it out but does not run on my CDMA touch.
It work for me on Hermes With schaps wm6 Ver 4.30
thanks.
WJames said:
Greets.
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
W James
Click to expand...
Click to collapse
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
today plugin s2u
it was a dream cam true if was a today plugin, to the left...lock, to the right ...unlock, but in the today,
I use my standard windows lock today plugin, without the lock buttons, so when i touch any buttom , the backlight goes on (to see the clock and appointments in one clic).
today plugin s2u is the rigth way.
great work
red.schumi said:
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
Click to expand...
Click to collapse
as he said...it sits behind the screen..and waits for the resume event
Here's a screen shot as per request. It's very plain jane. I wasn't looking for the beauty of something like S2U. I merely wanted a functional app that didn't take up much real estate (5kb).
Once it's gone through the paces and looks to be bug-free, I'll release the code and you can tweak to meet your needs.
It gives a black screen with white text in the center of screen saying "Slide right to unlock." There is a box with a plain white slider. You cannot see your today screen.
edit: Sorry, had the page open while I tested it and did not notice your reply before posting.
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
perasite said:
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
Click to expand...
Click to collapse
Hmm, never had that problem with bulit-in lock. Yes, to each their own. I've installed/uninstalled S2U2 soooo many times. I love the app but end up finding that it serves me no real purpose (other then eye candy) and it gets uninstalled. New version comes out, installed for a about 3-4 hours, then uninstalled again.
Very Nice...can i Request something?
Hi
Thanks for the nice application
very small, problem free so far (on Eten M700 with WM6) & useful
Can i have 3 requests please:
1- can you make the slider spring back to the left if it was accidentaly moved to the right, right now it stays half way & i think if you make it spring back it will be more safe as a lock & it will look better too
2- can you make the slider button wider (double) so i can catch it with my fat fingers
3- can you add an icon, so i may put it in my today launcher list & it would look better than the plain white square, something like a lock or key or a hand can do.
I also noticed that sometimes as i come out of the suspend mode, the slider is either late to appear (1-2 sec) & may remain unresponsive for two or three trys to slide it to right (stays in place)
Once started i couldn't figure how to get rid of it & seems that only way is to soft reset to go back to normal wake up without locking
Hope these comments help..thanks again for nice work
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
Those apps you mentioned take a ****load of memory and add to battery drain because of all the animations and graphics. His is a simple slide function that sips memory and battery life. Very useful IMO. Sliding is good cuz I find unlocking the WM way to be annoying. I have to touch an icon to lock. Then to unlock, I have to press two buttons. With sliding, it locks automatically and unlocking is accompished in one simple motion.
You're right that there's already enough S2U programs.
I also think S2U2 is an awesome balance between beauty and speed/mem cost. For people who have only tried S2U, you really need to change to S2U2... WAY faster and stable!
In most cases, yes S2U isn't that necessary, as it's similar an extra step to get to your today page, but I need it because:
1) My alarms don't wake if the phone is on standby, so I put it onto S2U2 mode when I sleep
2) My audio manager doesn't go to the next song if the phone is on standby, so I have to lock my phone while listening using S2U2
I question how good it'll be to have Slide 2 Lock as a today plugin, since I don't need some extra waste of space. What I do is set the gesture right-to-left (using FTouchFlo) to execute S2U2 so when I slide right to left, it opens S2U2, then sliding left to right, unlocks it. Love it!
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
I hate to say it, but that's not quite true. If you setup the lock all buttons, sure you won't accidentally turn it on, but if you get a phone call, it doesn't just power right off (at least my 6700 doesn't) - it can and has made phone calls like that...
And as for the S2U/2 - they use quite a bit more memory than this. A 5k program use is great, although I won't use it because I like the clock on s2u2.
Great App
This is all I ever really wanted. Just a very simple slide unlock. simple.
Excellent.
thanks.
This simple slide to unlock app is perfect for my needs...Thanks!
The point here is WJames created an application for his own use and shared it with everybody. If someone think that it is not req. they might not use it. Anyway thanks for the nice little app.
Thanks! Great small app. Would be fantastic with a simple white clock above the lock bar though, so we could check the time on the phone without unlocking it. Thanks a bunch!
I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
the only thing i can thing of is use s2u2 or any other locking app
egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay
Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?
i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.
god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.
pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!
update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)
xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought
xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither
I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
JVogler said:
I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
Click to expand...
Click to collapse
I actually prefer the full screen version, it is easy to use with the finger. Touching to the left or right of the volume indicator will remove the display and go back to your normal screen.
yatrg said:
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
Click to expand...
Click to collapse
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
hitekredneck said:
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
Click to expand...
Click to collapse
It removes it. I like it, the volume buttons are more responsive instead of take a second or 2 to actually change, and the full screen is annoying.
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
firefurby said:
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
Click to expand...
Click to collapse
Setting this value to "1" will give you the slim vertical slider on the left of the screen, but this slider is not operable by touch on the screen, it is only a visual aid to let you know where your volume is at when you press the vol up and down hardware buttons.