Hi all,
i have a little problem with my M3100.
When I am speaking to the telephone, some time, I do not hear any more for some seconds.
I remain without volume. Then, after some seconds it returns to hear.
I do also a hardreset but nothing.
Someone had already succeeded ? i must open it ?
Thanks all
Denis
DenisJ said:
Hi all,
i have a little problem with my M3100.
When I am speaking to the telephone, some time, I do not hear any more for some seconds.
I remain without volume. Then, after some seconds it returns to hear.
I do also a hardreset but nothing.
Someone had already succeeded ? i must open it ?
Thanks all
Denis
Click to expand...
Click to collapse
You may have the loose front speaker contacts or faulty speaker described here:
http://forum.xda-developers.com/showthread.php?t=288728
Mike
Thanks for the llink ...
i'll try to open it this night.
I olny thik that if i can't repair it, i will lost the waranty...
:-(
Thanks again
Denis
DenisJ said:
Thanks for the llink ...
i'll try to open it this night.
I olny thik that if i can't repair it, i will lost the waranty...
:-(
Thanks again
Denis
Click to expand...
Click to collapse
Yes it is warranty voiding - I would always advise using warranty in preference to a do-it-yourself fix.
Mike
Hi Mike,
i opened yesterday night... and until now was everythink ok.
I just forced up the 2 pices of metal and was ok.
This night i must reopen it and maybe i will find the bad contact...
:-(
I will F5
Denis
DenisJ said:
Hi Mike,
i opened yesterday night... and until now was everythink ok.
I just forced up the 2 pices of metal and was ok.
This night i must reopen it and maybe i will find the bad contact...
:-(
I will F5
Denis
Click to expand...
Click to collapse
Hi Denis
Ok - of course it is possible the speaker is faulty and not just the contacts.
Mike
Hi there,
do you know please if (with the tester) the 2 contacts must close or not ?
Usualy (afaik) the speakers must have conductor betwen 2 contacts ... or not ?
I tell you this because, i test the 2 contacts of my little speaker and there was no close circuit.
Do you know where can i faound another speaker please ?
Thanks again
Denis
DenisJ said:
Hi there,
do you know please if (with the tester) the 2 contacts must close or not ?
Usualy (afaik) the speakers must have conductor betwen 2 contacts ... or not ?
I tell you this because, i test the 2 contacts of my little speaker and there was no close circuit.
Do you know where can i faound another speaker please ?
Thanks again
Denis
Click to expand...
Click to collapse
On your meter you should NOT have an open circuit there should be a resistance reading not infinity (open circuit).
Another test you can do with some meters (ones that have a resistance multiplier X1 X10 X1000) is set it to X10 resistance scale and tap the probes on the speaker connections. You should hear a faint click in the speaker. This works because the meter delivers a small current in order to measure the resistance.
I forget now if it is the front or rear speaker you are having problems with?
Mike
Hi Mike,
i opened yesterday night again (sorry but i was in hollyday)
i so that the front speaker was interupted (not conduct)
... i opened the little speaker i repair it (so so hard) the wire is so little.
Now is work ... but the sound is little strident... maybe because of the worm
think that i used to paste the wire.
Anyway... now i'm looking to buy a speaker... the front one
... do you know some site where can i buy ?
Thanks for all
DenisJ
DenisJ said:
Hi Mike,
i opened yesterday night again (sorry but i was in hollyday)
i so that the front speaker was interupted (not conduct)
... i opened the little speaker i repair it (so so hard) the wire is so little.
Now is work ... but the sound is little strident... maybe because of the worm
think that i used to paste the wire.
Anyway... now i'm looking to buy a speaker... the front one
... do you know some site where can i buy ?
Thanks for all
DenisJ
Click to expand...
Click to collapse
I don't know of a source for the official front speaker, but the motorola L6/L7 earpiece/speaker fits and works. Not exactly identical but similar.
http://www.phatphones.com/mobile-phone-repairs-1.htm#speaker
Mike
Ok ... i'll loking for one of them maybe here in Italy.
Thanks for all helm Mike
DenisJ
Related
There was a thread here about that the voice from the earpiece is distorted. I experienced to have a similar problem. From the first day the sound was excellent but in 2 months it changed to distorted and then become very-very weak. At the same time the sound was good if a loudspeaker is on or if the hands-free is connected. Thus, I supposed that the contact becomes bad. To fix it, I disassembled the device. The *.pdf-file how to do that is included (33 megs). When the contacts were formed so they touch firmly the corresponding places on the printed board and the device was assembled, I heard nice voice from the earpiece.
So, in some cases the problem with the sound may be due to weak contacts. I suppose the contacts may become poor because the material for the outputs on the earpiece is not so elastic plus influence of vibration from the vibromotor plus influence of humidity.
Backup the system before disassembly because during this the backup battery may discharge completely!
Sorry wasn't logged on...
Thanks a lot I got this problem long time ago but I don't know how to disassemble it so I always try to shake it to fix ......
Great ! Very useful
Thanks
thanks for the guide..... very useful
Where can I find the 33meg pdf? I need to disassemble the device too...
regards
That is what I thought th first time I opened my MDA Compact! Believe me I am the very first one I did when the device first came out! After lots of research let me tell you this:
IT IS NOT THE CONTACTS! IT IS THE SPEAKER! The membrane is of low quality when you open the device and "fixing" the contacts it will only make it to work for a few phone calls up to a couple of days at most! The speaker is burnt by the high amount of volume the motherboard of JAM gives to the speaker! If you want to solve your problem then you ll have to find a Nokia Center and buy a speaker for a Nokia 6610! Nokia 6610 and HTC Magician have exactly the same speaker! The only thing you have to do is to change nokia's black cloth ribbon on the top of the speaker with HTC's black rubber get it into your magician and there you are! You have a perfect sound again! My only advise is to use the call volume just a click less than the maximum volume so you won't blow away your new speaker!
I dissasembled and reassembled my MDA compact more than 11 times trying fixing the contacts with no permanent result! After replacing the speaker with a Nokias's 6610 speaker everything seems to work like a dream for at least a month now! :wink:
Its much more easier to get Nokia's spare parts than HTC's! The speaker cost me 18euros!
any chances you could post us nice pictures of these manipulations ?
I would love to do that but please I don't think that my magician could survive one more disassembly! :twisted: In case of replacing a friend's speaker next week who has the same problem I will make sure I get those pics! Magician is extremely easy to be taken apart! The only hard parts in the removing process are the upper backplate which has to be removed very carefully in order to be fitted back in its place afterwards and the front faceplate where you will need something very thin like a thin knife or even better a razor to take it away from the black plastic on the sides! :wink:
where is the link to the pdf
Hey guys,
I cannot see the link to the pdf. I need to disassemble my Jam too.
Thanx, Martido
Sorry, I found it. Just woke up....
Oh, thank god, I'm not the only one, with this problem. But first i have two questions? Will i loose my warrenty when i open the device? Can O² discover that i opened it?
Did this contact fix solve the problem entirely, or not? Because katsj says the problem is the speaker!
Thank you in advance, such a great community!
Bauer
Edit:
I read the PDF File and i have to say .. this is simlply impossible! You can cause so much damage .... i dont know where to begin. One small mistake and you can't forget your PDA. I think this is highly to dangerous. Is there no easier way to solve the problem ... some ideas??
Or do the pictures lie and it isnt that complicated??
Bauer
My sound disappears during call...
Strange, during a call after a few minutes my sound disappears. I can hear the other caller, the other calleer can't hear me anymore...
But now I found a strange solution: when I pull up the volume button n the left a few times (it was already at maximum!) my sound is back!
Has anyone the same experience or a better solution?
I think when you pull up the volume there is this small tone and you hear this tone from the loudspeaker.
After you hear the tone, you cant here anything again, right?
I'm driving really crazy, i loved this XDA Mini since this prob occured and i want to find a solution as soon as possible ! I really dont know what to do
When i push against sd-card slot from inside, i hear everything .. again, so this is just a really small prob ..
I hope sb. find a solution quickly otherwise ... i dont know
Bauer
JackBauer said:
I think when you pull up the volume there is this small tone and you hear this tone from the loudspeaker.
After you hear the tone, you cant here anything again, right?
I'm driving really crazy, i loved this XDA Mini since this prob occured and i want to find a solution as soon as possible ! I really dont know what to do
When i push against sd-card slot from inside, i hear everything .. again, so this is just a really small prob ..
I hope sb. find a solution quickly otherwise ... i dont know
Bauer
Click to expand...
Click to collapse
I think it's a contact problem, so maybe the problem isn't that small... I don't want to open my device.
I don't think it has anything to do with the ROM or with the software.
(I wish it would, then there would be a solution in the end)
I had this problem too and found a fix:
I assume that while you are making a call, there is no audio from the earpiece. While on the call, adjust the volume up or down with the volume slider button. if you hear faint beeps and faint audio right after the beeps, your earpiece is working but there is a software glitch caused by the headphone jack.
Reset your device. Make a call (i.e. to your voicemail) and make sure there is audio incoming. Connect the (wired) headset. Disconnect the headset and you shoud now hear audio from the earpiece. You may have to reconnect/disconnect the headset a few times.
thanks
thanks for the pdf. ill check it right away!
U ROCK
THX GUYS>>>U ROCK...........I was soo worried.....
thx again..
Thanx dudes for the nokiaspeaker tip!
Just received my on ebay ordered nokia speaker and within a few minutes I fixed mine magician thanx to the pdf & already gainted knowledge on this page!
I bought this phone a year ago for a very nice price because of the damaged speaker and now at last I repeared it just for €3,- (instead of sending it to Orange risking over €100; I`m Dutch ya know )
hi guys...pulling this one out from the past....my magician has all the symptoms above, but with no luck, the replacement speaker did not do the trick...any other ideas/details/downloads....anything to get the audio back???\
BTW, i can hear glitches of sound if i play with the volume tab. That is to say, if i push it up, i hear the tone "ding" and i can hear the voice on the other end for a split second! So i must be close, no????
ok this is a bit funny
handsfree earphone works,,,but the ear phone in the mda compact doesnt work
the normal sound speaker works,,just not the phone speaker
ok it works stuttery when i press up on the slide switch and i can hear the caller kinda stuttering
wierd software rpoblem i think
its not hardware problem as the slider makes it work,,if i constantly press up o the slider but then i hear the caller and the beep beep it makes to tell you its at full volume
My qtek s110 is doing the same thing after i dropped it, could i have knocked the contacts?
Can anyone explain why the volume slider would make it work.
Cheers
I think its a hardware prob only! Cz if the volume slider is getting the sound volume increased, you guys still couldnt get the full volume right? If so, its probably the speaker or its contacts getting the problem!
www.CartyStudios.com
solution for no noise problems
Hey guys and girls, I also had problems with “no noise from the earpiece only.. and were puzzled with the problem for few days….until found the reason behind it.
As I am a lover with high-tech devices, I really wanted to fix this problem by myself (not prepared to pay few hundred dollars for repair from technicians).
I also want to contribute something on this site, as I have read great information’s from this site.
Here it goes.
I had this "no noise issue" problem with one of my device (have 2 sets of o2 mini) had no sound on the earpiece only (meaning speakerphone, hands free mic all works perfectly).
Now, to make everything short, I have done a great research with few personal technicians and even official technician from O2 Company and found the answers for this problem.
The fault actually lies with what is called the "Audio Daughter Board". It is a removable internal PCB that the speaker contacts to receive its audio signal from the phone. The board has a connector that is soldered to it which sits on another connector that is soldered to the main board. Both of these connectors can become removed from their respective solder connections usually as a result of a fall or physical impact. Usually all that is needed is a touch up of the solder points.
This Audio “daughter board” is connected with black connector at right hand side only, and the rest of the board with double sticky tape.
Most likely, the black connector has been disconnected to the “daughter board during drop of the device, as you need to solder the parts back (black connector has 14 legs, 7 on the left and 7 on the right) to get your earpiece sound back to normal.
I have done it, so can you (very small legs, so has to have delicate hands).
Now, mine works like a charm…. So happy…
After all, it was neither the programs, nor the legs of the earpiece, but the actual connection between the boards itself.
Hope my information helped.
Cheers
PS: I have updated my device to 2003 second edition with radio 1.13.00 but have no idea where to get pda programs. Can anyone let me know where to find such good programs?
It works!!!! Thanks
Your a genius
Hi im so happy it worked. I bought even a new speaker but this was noit the problem.
The internal speaker is now working but i found another problem with the ring tone liudness which i have to clarify now. So the serach will start again for me.
Again thanks.
Hi need help from all of u.
Hi my o2 mini have this problem, i can't hear anthing from the caller but they can hear me.may i know how to get the problem done, hope all of u can help me thank You.
bluehanul76
You really rock m8.
I was very doubfull that this would work. I have tried everything else people has suggested to no avail.
BUT I thought I have nothing to lose in trying you suggestion.
And it worked. It really worked.
Thank you very much.
Sorry for what am i going to say, maybe i did not get things clear...
How on earth can you solder the black connector both on the main motherboard and on the audio daughter board? Am just asking cause my magician had a broken earpiece and when i open it to replace it the phone died. Strange thing is that when i remove the storage card it comes alive again but no sound from the earpiece. So this solution is great although i had to make the question just to know how to handle things.
Thanks guys
Got it guys, the one connector on the main board was detached completeley and got stuck into the other. That is why i thought that it was one piece.
Man , i said to myself how come these people got it soldered , they must all have personal nano robots lol
Update:
Burned the small black connector tha sits on the main rboard
Any chance for someone to know what sort of PCB is this so i can purchase one?
Firts of anything sorry for my inglish but i´m portuguese and my inglish is a litle rusty.
I known there are a lot of people whith this problem and i had to. I tried a lot of things and i find a solution. The major problem of the this is that the black conector don´t conect very well whith audio bord, and i do a trick, so i thake a litle peace of cotton roll in powertape (like one that is on back of keybord) and a put it as way that when e close it make pressure in de audio border conector(in left of earpiece) agaist de front cover.
I hope I can help
enduromen
i have the same problem, and i will try to do as instructed. if it succeed everyone have a drink on me
Hello.
I have the same problem ina Qtek s100 but , like I dont know very well how to do look for the hardware piece that you send me the picture file because i cannot download it from XDA, it dont appear. If you send me to [email protected] I will be gratefull.
Thank you
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
devilman said:
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
Click to expand...
Click to collapse
Do you get in-call sound?
Mike
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
devilman said:
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
Click to expand...
Click to collapse
What I'm trying to get at is, is it just the rear speaker or the front earpiece as well? The things you mention use the rear speaker. If you dial your Hermes from another phone and pick up can you hear sound through the earpiece speaker?
Mike
yes, it's only the rear speker.
The earspeaker works fine.
devilman said:
yes, it's only the rear speker.
The earspeaker works fine.
Click to expand...
Click to collapse
Ok. With luck it's just the push on connector for the speaker that's come loose. Not uncommon. If you are not worried about the warranty then see here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
devilman said:
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
Click to expand...
Click to collapse
If it's only 3 weeks old then I would certainly get it checked under warranty. IF it's the connector then it might not have been firmly pushed on from the start. If the speaker is blown then definitely go for warranty as the speaker is not easy to get a hold of.
So although it's an easy fix just remove the back and you see the connector, it is too much to risk your warranty if it turns out to be more serious! Only problem may be returning the ROM to an acceptable one before getting a repair.
Mike
yes, this could be a problem.
I hope they will not make objection for WM6 (it's the HTC official relaease) but i think i shiul reinstalla the old bootloader, am i wrong?
is it possible ? where do i find it here ?
I'd really like to make it by myself, the problem, i think, is that the little label "void" has to broken and with it the warranty, hasn't it?
Where can i find an How TO disassemble the Tytn?
Again, thank you very much.
gents,
I know it is time I upgraded, but I am still using the Mega and i have a problem where it seems like most of the sound is coming from the rear speaker instead of from the ear receiver. Now I have to use the phone backwards just to hear the person on the phone.
I can't find the right setting to change this back to the receiver exclusively. Anybody have a clue?
did u clean the phone .... dust and oils can get into that region and block the sound ....
danieldobrea said:
did u clean the phone .... dust and oils can get into that region and block the sound ....
Click to expand...
Click to collapse
How about that! Seems to have done the trick..much appreciated!
ksimp said:
How about that! Seems to have done the trick..much appreciated!
Click to expand...
Click to collapse
I'm glad to hear again ....
Cheers!!!!
PS: I did replace the speaker first to go then and clean that part!!!
Once I dropped my huawei ideos x5 on the floor, opened up, and headed up the exterior glass.
Rode fine at least went well (had already once changed the low screen) did a factory reset. Got two problems:
When I make or receive calls I can not hear the voice of other people, but they listen to me.
The row of keys m, k L to the right of the phone does not work, just turning 90º the screen.
This can be derived from what? Contacts can be in the assembly of the phone?
What can I do?
Thanks.
Hi,
can anyone show me a photo from earphone and his contacts?
Thanks.
Did you mean photos like these? http://imgur.com/a/biJBG#0
zazza8 said:
Did you mean photos like these? http://imgur.com/a/biJBG#0
Click to expand...
Click to collapse
Hi zazza8,
Yes those photos helpe me. I've placed the parts just like the images, more precisely the earphone but still can't ear people on the other side!!!
What could it be the reason?
Thanks.
casusa said:
Hi zazza8,
Yes those photos helpe me. I've placed the parts just like the images, more precisely the earphone but still can't ear people on the other side!!!
What could it be the reason?
Thanks.
Click to expand...
Click to collapse
Sorry, I have no idea.
If you plug the headphones in the jack do you ear them or not?
Also you may try connect Bluetooth phones - so no contacts or wires are involved.
Thanks guys.
The mobile died from another problems.