I see these ?'s have been asked hundreds of times before, however my proble is a little different.
I have an O2 Xda from the UK that was on the O2 network.
I have moved to Australia and wish to use the device on the Telstra network, but the Xda has been network locked. As my device has an old ROM version i think i need to upgrade first, before running xdaunlock.exe.
Can anyone offer advise?
Cheers
:? :?
You have two possibilities to unlock your phone.
If you got an serial cable to attach your XDA you can use the xda manipulator to unlock it.
In the other case i would suggest you go to www.yorch.net, cook your own rom with the 3.17.03 Rom and use the xdaunlock tool....
HTH
Stefan
just do this simple thing... downlaod xda developers v1.2 and put your xda into the sync cradel with no sim or sd card in then follow it though.......
once done hard reset it....
then it will unlock your device when it starts up
then you can decide to stay on pc2002 or go to pc2003 as your device will not need to be unlocked again
I had a look at the xda-developers v1.2, it would appear my service provider is not on the list (Telstra) will this rom still work or will i have to find a ROM written for the Telstra network?
Cheers :?
the ROM has nothing to do with the operator. It's the RSU version that might not work with your new network. Just get your device unlocked and let's see if it receives the signal or not, then you may have to do RSU upgrade.
Unlock via XDAUnlock?
I have a TMO XDA with ROM4.01.00 and RS6.24.01. I'm selling it and need to unlock it for the buyer.
Is XDAUnlock the path to go?
if i'm not wrong, XDAunlock works only with ROMs with wmodem application and I'm not aware of any wm2003 that has it.
TMO 4.01.00 is available as exe upgrade. just flash your XDA with ROM 3.17 which will unlock your device then reflash back using TMO 4.01.00
good luck
SIM Unlocking
Thanks. Question on the SIM card. All this "unlocking" occurs with the sim card inside? Just to check:
1) With my sim inside, install Yorch's ROM3.17, when asked, unlock phone, finish install.
- Now this means the PDA phone has no phone service, correct? but PDA works?
2) Now install ROM4.01.00, RS6.24.01 with phone unlocked.
3) Remove sim card.
4) Ship to new owner
5) New owner inserts their sim card. Now what? They call their carrier with IMEI #?
Thanks
No, when you put the 3.17 ROM, the phone part should continue working as long as you don't touch the RSU. The SIM has nothing to do with all this stuff. All the locking info is within the GSM firm ware of your device. I would prefer to remove the SIM while flashing the ROM.
If your locked device works now with your SIM, it will definitly work after unlocking BUT it is not a good prove that it's really unlocked. You have to test it with another SIM before shiping to the buyer.
PS: no matter your dial or IMEI is, GSM system deals with a unique identifier for the SIM which called MSISDN. So, don't worry about the buyer
Biso007 said:
No, when you put the 3.17 ROM, the phone part should continue working as long as you don't touch the RSU. The SIM has nothing to do with all this stuff. All the locking info is within the GSM firm ware of your device. I would prefer to remove the SIM while flashing the ROM.
If your locked device works now with your SIM, it will definitly work after unlocking BUT it is not a good prove that it's really unlocked. You have to test it with another SIM before shiping to the buyer.
PS: no matter your dial or IMEI is, GSM system deals with a unique identifier for the SIM which called MSISDN. So, don't worry about the buyer
Click to expand...
Click to collapse
I never realized you could operate the unit without a sim card inside. I guess I'll have to try it and learn along the way. It seems removing the sim card forces a hard reset.
If all the locking info is in the GSM firmware and Yorch 3.17 ROM upgrade doesn't touch the RSU, how does the XDAUnlock operate then?
PW10A vs B Band Problems
Biso007 said:
No, when you put the 3.17 ROM, the phone part should continue working as long as you don't touch the RSU. The SIM has nothing to do with all this stuff. All the locking info is within the GSM firm ware of your device. I would prefer to remove the SIM while flashing the ROM.
If your locked device works now with your SIM, it will definitly work after unlocking BUT it is not a good prove that it's really unlocked. You have to test it with another SIM before shiping to the buyer.
PS: no matter your dial or IMEI is, GSM system deals with a unique identifier for the SIM which called MSISDN. So, don't worry about the buyer
Click to expand...
Click to collapse
During the unlock, the 3.17.03 set the phone to a model PW10A. My phone is a PW10B (USA). None of the .exe upgrade software will upgrade unit as they think it's the wrong band. I tried the Bootloader 5.15 - calendar and set the GSM to 900/1800 but model doesn't change in the identify screen. The sim has not been in the phone this whole time.
How do I change the model back to PW10B?
Fixed Wrong Band Problem
I put a ROM 4.0x.xx.nb1 file onto my SD card and using Wallaby Bootloader, flashed the unit's ROM. This appeared to have put the model back to PW10B1. Then I used the ROM4.01.00.exe to finalize the WM2003 upgrade. Phone is sim unlocked. Question:
when does phone become sim unlocked again? i.e. if I was to put my sim back in the phone, and connect to TMO, would that then lock the phone to TMO? Or once it's unlocked, it's unlocked for life? Just curious.
Typo
Should read, "when does phone get sim locked again", not sim unlocked.
Re: SIM Unlocking
cshields1 said:
Thanks. Question on the SIM card. All this "unlocking" occurs with the sim card inside? Just to check:
1) With my sim inside, install Yorch's ROM3.17, when asked, unlock phone, finish install.
- Now this means the PDA phone has no phone service, correct? but PDA works?
2) Now install ROM4.01.00, RS6.24.01 with phone unlocked.
3) Remove sim card.
4) Ship to new owner
5) New owner inserts their sim card. Now what? They call their carrier with IMEI #?
Thanks
Click to expand...
Click to collapse
The phone will remain unlocked to all networks.
I have a Siemens SX56 and USB cable to the docking station.
I have an SD card in the device but not an SD reader.
I copied the unlock file to my device and ran it but obtained an error
message "error getting unlock code". My cell provider is Canadian
(Rogers-AT&T) and the ROM in the device is R.20.11 ENG. The radio version is
A.20.10.
I'm hesitant to install the special edition ROM since the AutoConfig list of
providers doesn't include Rogers. I don't want to end up with no cell
service.
Any suggestions?
I have SX56 too, did it work?
Please tell me if it worked for you, I have SX56 too and I want to use on Roger network in Canada.
It doesnt need Rogers to be in the list, back up your original rom to sd card, flash se rom, unlock phone, reflash with original rom.
I have HTC Trophy with sim lock.
How to insert unlock code? Phone does not ask for code with non accepted sim card. Only message on screen "Invalid SIM".
Hi Tigran80,
I can only think of 2 ways that you might be able to do this:
- Try removing the sim card and turning on the phone then select emergency calls only and enter the unlock codes (by dialiing the number?)
- Otherwise you may need to flash your phone with an original firmware etc... This means you will lose all your saved phones etc unless you backed up your stuff (synced with zune). Yyou will need to look up what type of carrier your phone has and then using Ansars roms (some of them have issues updating to the lastest phone update so you can also try looking up wickedpengiuns guide to HSPL and RSPL (I've given him a quick guide on to use this tool which should help you).
P.S. Some phones can be traced using windows phone live so I hope this phone is yours (not that I'm accussing you)
http://forum.xda-developers.com/showthread.php?t=1207721
Hi after unlock bootloader via toolbox i got no sim card detected even after restore factory rom
What could be the reason for that? also its look like i flashed dual SIM ROM on single sim UK version device and its looks working ok
have you find a solution?
No sim card mostly results from flashing the wrong region firmware.
I flashed LineageOS because Sprint only displays some languages and i wanted to be able to choose all available (like on any smartphone). The phone is carrier unlocked because with the stock ROM I was able to use the phone normally with Vodafone Portugal. Now with the custom ROM it doesn't recognize the SIM card. Do I have to change the modem/baseband to it work normally?