i tried flashing a rom to my wizard and now it just freezes at the cingular screen where it shows the version, etc
please help?
Is your phone CID unlocked?
thanks for responding! i followed mun's steps of unlocking it so i think i did.
What's your IPL/SPL?
it says 2.25.001 for both
TaurusBullba said:
What's your IPL/SPL?
Click to expand...
Click to collapse
excuse me sorry it's 2.25.0001
3 0s, it's a g4
livejamie said:
excuse me sorry it's 2.25.0001
3 0s, it's a g4
Click to expand...
Click to collapse
Well, I'd hop back into the bootloader screen and reflash your carrier ROM. Then read over these instructions a couple more times and try again.
Also, before we get ahead of ourselves, what ROM did you try flashing in the first place?
TaurusBullba said:
Well, I'd hop back into the bootloader screen and reflash your carrier ROM. Then read over these instructions a couple more times and try again.
Also, before we get ahead of ourselves, what ROM did you try flashing in the first place?
Click to expand...
Click to collapse
actually i just figured that out on my own. but i appreciate you answering.
i was trying to flash the touch version of nbd when this happened using those exact instructions from mun's thread.
i'm scared now lol.
i'm going to try the windows titanium rom now.
livejamie said:
actually i just figured that out on my own. but i appreciate you answering.
i was trying to flash the touch version of nbd when this happened using those exact instructions from mun's thread.
i'm scared now lol.
i'm going to try the windows titanium rom now.
Click to expand...
Click to collapse
No reason to worry too much. The Titanium ROM is "G4 safe" (it has no IPL/SPL or radio). Just read those instructions I linked to previously and don't skip any steps and you'll be fine.
Good luck!
TaurusBullba said:
No reason to worry too much. The Titanium ROM is "G4 safe" (it has no IPL/SPL or radio). Just read those instructions I linked to previously and don't skip any steps and you'll be fine.
Good luck!
Click to expand...
Click to collapse
is there any reason why the crossbow version of nbd would work but the touch version wouldn't?
livejamie said:
is there any reason why the crossbow version of nbd would work but the touch version wouldn't?
Click to expand...
Click to collapse
Could have just been a bad flash. That's pretty common.
TaurusBullba said:
Could have just been a bad flash. That's pretty common.
Click to expand...
Click to collapse
it happened again, i started this thread here to discuss it more:
http://forum.xda-developers.com/showthread.php?p=1376025#post1376025
Related
my xv6700 radio=none .
I want to use mtty to backup the radio from another xv6700,and then update this xv6700. but I can not backup the xv6700 radio with mtty. please help me!
thanks
why back it up? go to ppcgeeks.com and sign up and you can get all the roms from there. The newest is 1.41. I just did it like 2 days ago, at my house I got maybe one bar, now I get 3 atleast. It was a great update.
because one of other damage the radio, it is radio=none!
so I want to use the miniSD backup a normal radio to replace the bad one!
thanks
Forget this post, look at the one below.
Oh, and the miniSD would have nothing to do with it. MTTY is on the comp so it would save it to the comp, and to the best of my knowledge you can't flash an Apache from the miniSD card.
Go here, only thing I could find on getting your ROM back (hard reset), amazing what searching can do:
http://www.ppcgeeks.com/how-to-get-your-radio-back-d-t4513.html
thanks
but it cat not find the radio too.
Do you mean you can not find the radio?
ftp://ftp.ppcgeeks.com/Apache/Updated Radios/
username: ppcgeeks
password: ezupload
Search my friend!
oplitic said:
Do you mean you can not find the radio?
ftp://ftp.ppcgeeks.com/Apache/Updated Radios/
username: ppcgeeks
password: ezupload
Search my friend!
Click to expand...
Click to collapse
yes,when I boot the phone,the screen show: radio none!
I have try the 1.27 1.10 radio,but no radio yet!
my phone is Verizon xv6700. not a sprint ppc6700.
thanks
yj060464 said:
yes,when I boot the phone,the screen show: radio none!
I have try the 1.27 1.10 radio,but no radio yet!
my phone is Verizon xv6700. not a sprint ppc6700.
thanks
Click to expand...
Click to collapse
doesn't matter if it's sprint or verizon. I have verizon. apparently you're **** out of luck.
oplitic said:
doesn't matter if it's sprint or verizon. I have verizon. apparently you're **** out of luck.
Click to expand...
Click to collapse
I tried Phoenx06 Radio 1.41! but no radio yet.
if I can save my poor xv6700?
yj060464 said:
I tried Phoenx06 Radio 1.41! but no radio yet.
if I can save my poor xv6700?
Click to expand...
Click to collapse
read what I wrote and ask that question again.
oplitic said:
read what I wrote and ask that question again.
Click to expand...
Click to collapse
after so many times update the radio(eg:1.10 1.27 1.41), but when phone boot, the screen show R NONE! ( i have read the web:http://www.ppcgeeks.com/how-to-get-y...k-d-t4513.html)
thanks
yj060464 said:
after so many times update the radio(eg:1.10 1.27 1.41), but when phone boot, the screen show R NONE! ( i have read the web:http://www.ppcgeeks.com/how-to-get-y...k-d-t4513.html)
thanks
Click to expand...
Click to collapse
I'm done with you, apparently you can't read. I said I think you're **** ou of luck. You porbably fried the radio. Don't play with things you know nothing about!
http://www.utstar.com/pcd/downloads/
just download APA_VZW_20720_206_11000_WWE_Ship
You will find radio there
Charlys said:
http://www.utstar.com/pcd/downloads/
just download APA_VZW_20720_206_11000_WWE_Ship
You will find radio there
Click to expand...
Click to collapse
He already has the radio. He just can't put it all together apparently.
try esn repair procedure.
No, once the radio is no longer showing on on the booting process it is gone, It is a hardware issue and not software related. I dont care how many times you flash or with what ROM you flash with. The radio is gone and it is not coming back. I worked my azz off on a device with the same issue. I re-flashed my own ROM, I flashed with an OEM ROM. I copied files from a working 67 to the bad 67 and nothing. I used SPB Clone from a good and working 67 to the 67 with no radion and still nothing.
Believe me it is dead. What you guys are failing to read is in his first post his radio on bootup says "none". That means hardware failure, I.E. DEAD.
Go get a replacement from a claim or ebay.
IF, i said if, esn and checksum of $SYS.ESN are wrong its the same situation but radio should flash. im gonna mess around with the one i already have, its on the same situation. ill let u know if anything.
yj060464 said:
my xv6700 radio=none .
I want to use mtty to backup the radio from another xv6700,and then update this xv6700. but I can not backup the xv6700 radio with mtty. please help me!
thanks
Click to expand...
Click to collapse
Same my 6700 is!
Could you tell me how to use mtty to backup xv6700? I can find another 6700 to copy to my bricked one.
I've made the Hard-SPL to upgrade my rom. Ok.
If I want to come back to original Italian ROM is possible to come back also with Hard-SPL to original?
Sorry for my bad english.
Thank You.
alepas72 said:
I've made the Hard-SPL to upgrade my rom. Ok.
If I want to come back to original Italian ROM is possible to come back also with Hard-SPL to original?
Sorry for my bad english.
Thank You.
Click to expand...
Click to collapse
We do not know yet...
Offical rom does not overwrite hard-spl.
u need a sspl to come back. olipro would provide that.
Mod edit: Personal insults not permitted
Olipro said:
firstly, why do you want to? my assumption is that you're a moron.
Click to expand...
Click to collapse
Hi Olipro,
We know hard-spl is the best on our device, but for example in Hungary service said not offical software component (for example hard-spl) void warranty...
When I took my Triniy to service, I had to restore the offical base...(ipl, spl, os, radio).
But of course if everything works, hard-spl stays on pda!
AND THANKS FOR HARD-SPL
fktsndr said:
...but for example in Hungary service said not offical software component (for example hard-spl) void warranty...
Click to expand...
Click to collapse
In Greece also.
well fine...
run the Hard-SPL updater, as soon as it puts your phone in bootloader and asks you to replug USB... DON'T... wait for the RUU on the PC to timeout and exit, NOW replug the USB, flash a normal ROM.
Thank you.
Olipro said:
well fine...
run the Hard-SPL updater, as soon as it puts your phone in bootloader and asks you to replug USB... DON'T... wait for the RUU on the PC to timeout and exit, NOW replug the USB, flash a normal ROM.
Click to expand...
Click to collapse
It seems not working..
Process stops at 14%...
Back to bootloader, there is still Oli
fktsndr said:
It seems not working..
Process stops at 14%...
Back to bootloader, there is still Oli
Click to expand...
Click to collapse
You Need to flash an Official ROM for the SPL to revert back
reyjabs said:
You Need to flash an Official ROM for the SPL to revert back
Click to expand...
Click to collapse
Situation: I have hard-spl and offical HTC wwe rom on my pda.
I did exactly what Oli said, and of course I wanted to flash the offical rom again.
Process stops at 14%!
Not working....
Olipro said:
firstly, why do you want to? my assumption is that you're a moron.
Click to expand...
Click to collapse
Are you sure?
If I want to sale your pda (ebay?) for the warranty?
I'm pefect normal I think no?
Attention please!!!
fktsndr said:
Situation: I have hard-spl and offical HTC wwe rom on my pda.
I did exactly what Oli said, and of course I wanted to flash the offical rom again.
Process stops at 14%!
Not working....
Click to expand...
Click to collapse
Olipro, do you have any new idea?
Looks like Olipro does'nt want us to go back to original SPL
kutonglupa said:
Looks like Olipro does'nt want us to go back to original SPL
Click to expand...
Click to collapse
That's not true. He's just a bit busy at this time but he'll get back to you as soon as he can.
or u people cant read and are doing it wrong? (idk maybe u are doing it correctly and olipro messed up something)
Pawel062 said:
or u people cant read and are doing it wrong? (idk maybe u are doing it correctly and olipro messed up something)
Click to expand...
Click to collapse
Either of which is definitely true.
Pawel062 said:
or u people cant read and are doing it wrong? (idk maybe u are doing it correctly and olipro messed up something)
Click to expand...
Click to collapse
I hope I can read
I tried the method exactly what oli said...it is not working
Could you try it too?
I tried but also stuck at 14% and stucks in bootloader after each reset
I've tried it a hundred times and it does'nt work. Might as well forget it. The procedure just suck and we're not even getting a decent reply except being sweared at.
A friend of mine bought a used Htc TOUCH ELF last week..
He wants to flash the new HSPL 3.10..
I flashed new SPL (or HSPL) everytime a new one came out, so I don't know if my friend could flash directly the latest one (having at the moment IPL 1.11.0002 / SPL 1.11.0000...)...
EDIT 30/07/08: As confirmed by eshield (http://forum.xda-developers.com/show...9&postcount=96), Elf owners can directly upgrade the IPL/USPL.
EDIT 06/09/08: Directly upgrading IPL/USPL in one go may or may not work for all of Elf owners (if the Elf is pre-release or old one). If your phone (Elf only) is stuck at Smart mobility screen with IPL 2.26, SPL 2.26, try downgrading the IPL to 1.19 or 1.17.
Click to expand...
Click to collapse
Could he flash it directly?
If not, what about the process to flash IPL and HSPL?
Cheers....
Hi Flaviopac
This is the thread for you
http://forum.xda-developers.com/showthread.php?t=408637
Then this
http://forum.xda-developers.com/showthread.php?t=445666
and you are set ;-)
Ciao
tito12 said:
Hi Flaviopac
This is the thread for you
http://forum.xda-developers.com/showthread.php?t=408637
Then this
http://forum.xda-developers.com/showthread.php?t=445666
and you are set ;-)
Ciao
Click to expand...
Click to collapse
Man, thanks for your answer....
But I have already read both the threads and I didn't find anything usefull for my needs....
Maybe I missed something....
Any other suggestion??
Cheers...
flaviopac said:
Man, thanks for your answer....
But I have already read both the threads and I didn't find anything usefull for my needs....
Maybe I missed something....
Any other suggestion??
Cheers...
Click to expand...
Click to collapse
Maybe missed this post and the next ones
http://forum.xda-developers.com/showpost.php?p=3003010&postcount=477
tito12 said:
Maybe missed this post and the next ones
http://forum.xda-developers.com/showpost.php?p=3003010&postcount=477
Click to expand...
Click to collapse
Many thanks!
A I said before... I missed something... and 447th post wasn't so easy to be found.....
Thanks again!
flaviopac said:
Many thanks!
A I said before... I missed something... and 447th post wasn't so easy to be found.....
Thanks again!
Click to expand...
Click to collapse
My pleasure
Tito
I start upgrading STEP by STEP...
When I'm going to flash SPL from 1.17 to 2.27, following the instructions, the screen doesn't become BLANK, but it shows me the three colours (bootloader mode) screen....
I brake the flashing procedure because my screen wasn't blank...
Should I go on flashing it in this way, or maybe I should retry untill the screen turns blank?
flaviopac said:
I start upgrading STEP by STEP...
When I'm going to flash SPL from 1.17 to 2.27, following the instructions, the screen doesn't become BLANK, but it shows me the three colours (bootloader mode) screen....
I brake the flashing procedure because my screen wasn't blank...
Should I go on flashing it in this way, or maybe I should retry untill the screen turns blank?
Click to expand...
Click to collapse
You should continue, in my case it was the same, after bootloader the screen turns blank and then the scale goes from 1 to 100% and then it's finished, like I said you may have to do this again if it fails
Good luck
tito12 said:
after bootloader the screen turns blank and then the scale goes from 1 to 100% and then it's finished,
Click to expand...
Click to collapse
My screen, after bootloader, remains always in bootloader mode (but I didn't go on with the steps in elf-uspl dos window.....
EDIT: successfuly flashed SPL 2.27...
I solved the problem above repeating the procedure regarding SPL flashing...
Now... Should I try to flash the latest SPL 3.07?
Currently my IPL is 2.07? Should I upgrade it too?
PS: tito12, many thanks for your help!
flaviopac said:
My screen, after bootloader, remains always in bootloader mode (but I didn't go on with the steps in elf-uspl dos window.....
EDIT: successfuly flashed SPL 2.27...
I solved the problem above repeating the procedure regarding SPL flashing...
Now... Should I try to flash the latest SPL 3.07?
Currently my IPL is 2.07? Should I upgrade it too?
PS: tito12, many thanks for your help!
Click to expand...
Click to collapse
1-Congratulations
2-Why Not?
3-You're welcome
4 I have to go for half hour
Good luck
Tito
Successfuly flashed IPL/USPL 3.07!
What about the new 3.10 ones? Are they really better?
flaviopac said:
Successfuly flashed IPL/USPL 3.07!
What about the new 3.10 ones? Are they really better?
Click to expand...
Click to collapse
You see my sig, I've read the newer the better, so I even went to Hspl, but I honestly can't see a difference, so now it's up to you or your friend.
So good night for the time being or buona sera
Tito
tito12 said:
You see my sig, I've read the newer the better, so I even went to Hspl, but I honestly can't see a difference, so now it's up to you or your friend.
Click to expand...
Click to collapse
I'll test the last IPL/SPL I flash for a couple of days....
Did you receive my last PM?
thanks a ton!! just updated my cell to wm 6.5!!
A friend of mine flashed Kumar's latest and now for some reason is stuck on the T-Mobile screen, but can get into bootloader. How can he flash a new rom?
Breakthecycle2 said:
A friend of mine flashed Kumar's latest and now for some reason is stuck on the T-Mobile screen, but can get into bootloader. How can he flash a new rom?
Click to expand...
Click to collapse
Search is your friend.
This must be brought up 100 times a day
djchubbs said:
Search is your friend.
This must be brought up 100 times a day
Click to expand...
Click to collapse
Right. Except we cannot reflash because there because no connection can be established (obviously). How do you flash through bootloader? Same way?
Breakthecycle2 said:
Right. Except we cannot reflash because there because no connection can be established (obviously). How do you flash through bootloader? Same way?
Click to expand...
Click to collapse
Yes, put device into bootloader, when usb shows up at the bottom of the screen flash as normal. And as was suggested above, a search would have shown you that the problem is not the rom, because the next one you flash is likely to do exactly the same (HINT: Radio)
ClydeB1 said:
Yes, put device into bootloader, when usb shows up at the bottom of the screen flash as normal. And as was suggested above, a search would have shown you that the problem is not the rom, because the next one you flash is likely to do exactly the same (HINT: Radio)
Click to expand...
Click to collapse
Thanks. I figured it was the radio.
Got it now. The radio seems fine with the new rom. Thanks!
Breakthecycle2 said:
Got it now. The radio seems fine with the new rom. Thanks!
Click to expand...
Click to collapse
Pleasure
And how to fix it!?
Basically for the last two days I have been trying to root my phone unsuccessfully. The problem is with the hboot driver and it not working. The first time i installed the driver it seemed to go fine, but after plugging my Wildfire into the usb I got a new hardware message and it was trying to find "ADB"..
Anyways unrevoked obviously did not find my phone so today I have uninstalled the driver and tried to update it again. At first it seemed to be going well, but then it asked for winusbcoinstaller.dll from disc.. I tried to link a picture but because of my low post count I cant.
Does anyone know what this means and how to fix it?
Many thanks in advance and sorry if its in the wrong section.
Hi,
Maybe you can find answer here:
http://forum.xda-developers.com/showthread.php?t=899892
BR
Greg
grzesiczek1 said:
Hi,
Maybe you can find answer here:
http://forum.xda-developers.com/showthread.php?t=899892
BR
Greg
Click to expand...
Click to collapse
Sugar. Cheers for that. I thought i was running 2.1 as i have never done any upgrades!, i didnt think my phone came standard with 2.21.. lol.
Guess i'l check back in the future to see if there is a fix.
My Wildfire was also shipped with 2.2..
Just took it out of the box and tried to root -> not this time...
grzesiczek1 said:
My Wildfire was also shipped with 2.2..
Just took it out of the box and tried to root -> not this time...
Click to expand...
Click to collapse
Guess we're in the same boat then man.
http://forum.xda-developers.com/showthread.php?t=847443
Have fun rooting guys!
h4oxer said:
http://forum.xda-developers.com/showthread.php?t=847443
Have fun rooting guys!
Click to expand...
Click to collapse
Thankyou. Although i am a complete novice and have no idea what any of that stuff means.. lol
I have just read that thread. My hboot version is 1.01.0001
Im still waiting for the fix from revoked right..?
oneinouts said:
I have just read that thread. My hboot version is 1.01.0001
Im still waiting for the fix from revoked right..?
Click to expand...
Click to collapse
Yes, you are. The downgrade guide is valid only for the CN Froyo Release, which had a HBOOT version 0.83
3xeno said:
Yes, you are. The downgrade guide is valid only for the CN Froyo Release, which had a HBOOT version 0.83
Click to expand...
Click to collapse
Thankyou. I thought I might be.
Im sure someone will come up with something, well im hoping anyway